CppLinuxSerial

Linux serial port library written in C++.

Description

Library for communicating with COM ports on a Linux system.

Simple API
Supports custom baud rates
cmake based build system

Installation

Linux, MacOS, Windows

Make sure you have cmake installed.
Clone the git repo onto your local storage.
Change into root repo directory:
```
$ cd CppLinuxSerial
```
Create a new build directory and change into it:
```
$ mkdir build
$ cd build
```
Run cmake on the parent directory to generate makefile:
```
$ cmake ..
```
Run make on the generated makefile to generate the static library libCppLinuxSerial.a and an unit test executable:
```
$ make
```
To install the headers on your system:
```
$ sudo make install
```
To run the unit tests:
```
$ make run_unit_tests
```
NOTE: The unit tests used to use virtual serial ports via stty on Linux to do more through testing. I ran into permission problems running stty on TravisCI after they did an update and had to remove tests (leaving almost no tests remaining). If anyone wants to add better unit tests, it is greatly welcomed!

Examples

#include <CppLinuxSerial/SerialPort.hpp>

using namespace mn::CppLinuxSerial;

int main() {
	// Create serial port object and open serial port at 57600 buad, 8 data bits, no parity bit, and one stop bit (8n1)
	SerialPort serialPort("/dev/ttyUSB0", BaudRate::B_57600, NumDataBits::EIGHT, Parity::NONE, NumStopBits::ONE);
	// Use SerialPort serialPort("/dev/ttyACM0", 13000); instead if you want to provide a custom baud rate
	serialPort.SetTimeout(-1); // Block when reading until any data is received
	serialPort.Open();

	// Write some ASCII data
	serialPort.Write("Hello");

	// Read some data back (will block until at least 1 byte is received due to the SetTimeout(-1) call above)
	std::string readData;
	serialPort.Read(readData);

	// Close the serial port
	serialPort.Close();
}

If the above code was in a file called main.cpp and you had installed CppLinuxSerial following the instructions above, on a Linux system you should be able to compile the example application with:

g++ main.cpp -lCppLinuxSerial

For more examples, see the files in test/.

Issues

See GitHub Issues.

FAQ

My code stalls when calling functions like SerialPort::Read(). This is probably because the library is set up to do a blocking read, and not enough characters have been received to allow SerialPort::Read() to return. Call SerialPort::SetTimeout(0) before the serial port is open to set a non-blocking mode.

Changelog

See CHANGELOG.md.

pocopico / CppLinuxSerial