Having fun with a Spartan 3 FPGA
ISE WebPACK Design Software Product Licensing
Spartan-3 FPGA Starter Kit Board User Guide
ISE Version 14.7
The environment variables are written to the settings[32|64].bat file at "E:\Xilinx\14.7\ISE_DS". In order to set the variables in your environment, you must run the settings[32|64].bat file.
FPGA: xc3s200 PROM: xcf02s
Configuration file formats for PROM: .mcs, .isc, .bsd
- RS-232 - Wikipedia
- XMODEM - Wikipedia
- XModem Protocol with CRC
- XMODEM Protocol Overview
- XMODEM/YMODEM Protocol Reference
- Floppy Disk Drive Pinout
- Floppy-disk controller
- List of floppy disk formats
- Floppy Diskdrive pinout
- Floppies: controllers, cabinets, disks, docs & hints
- SONY MPF920 3.5" Floppy disk drive
- Tech information on floppy disks drives and media
- disk_format.txt
- Preserving a floppy disk with a logic analyzer and a serial cable
- Modified frequency modulation
- Disk formatting
- Fujitsu MB8876/77 FDC
- The TI floppy disk controller card
- Phil Storrs PC Hardware book
- Floppy disk
- Floppy disk format
- Weak bits floppy disc protection: an alternate origins story on 8-bit
- Intel 8271
- GlasgowEmbedded
- Notes on Floppy Disks
- Floppy-disc controller design must begin with the basics
- Floppy-bird
- FDC9216
- Finding byte boundaries in floppy disk MFM bitstreams
- MFM Reader
- Floppy Drives - Single Density and Double Density, FM, MFM & GCR