pmarches / jbd_ble_esp32

Use a ESP32 as a bridge between venus GX serialBattery and BLE BMS based on the JBD protocol

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Use a ESP32 as a bridge between venus GX serialBattery and BLE BMS based on the JBD protocol.

The victron octoGX has a pretty bad bluetooth harsware module. SerialBattery (https://github.com/Louisvdw/dbus-serialbattery) has support for bluetooth connected BMS that speak the JBD serial protocol. However, I found this setup consumes a lot of CPU and is unreliable.

This project uses a common ESP32 to connect BLE BMS that speak the JBD protocol to SerialBattery.

Reference: https://gitlab.com/Overkill-Solar-LLC/overkill-solar-bms-tools/-/blob/master/JBD_REGISTER_MAP.md https://github.com/kolins-cz/Smart-BMS-Bluetooth-ESP32/blob/master/BMS_process_data.ino https://wiki.jmehan.com/download/attachments/59114595/JBD%20Protocol%20English%20version.pdf?version=1&modificationDate=1650716897000&api=v2

ISSUES:

  • Can't connect twice to get the logs. nc BLEBMS-4A4D60.local 85 just hangs, no output.
  • Call values 0,1,2 stay zero
  • Sometimes, it only shows data from one battery. Does not deal with BLE disconnects I think
  • Percentage is wrong after a few hours of operation. Restart of python serial-battery does not improve things. Reboot of ESP32 fixes the issue for a while.

TODO:

  • Improve log messages. Know to the context: BATTERY1, BATTERY2, GX comm, etc..
  • Actually read EEPROM settings from batteries. How to compute them?

About

Use a ESP32 as a bridge between venus GX serialBattery and BLE BMS based on the JBD protocol

License:GNU General Public License v3.0


Languages

Language:C++ 99.3%Language:CMake 0.7%