pkscout / simple-weather-clock

A card for Home Assistant designed to display a digital clock with six slots below for various numeric environmental sensor data.

Simple Weather Clock

A card for Home Assistant designed to display a digital clock with six slots below for various numeric environmental sensor data. This card is meant to be used on a dashboard configured as a panel.

Installation
You should install this card using HACS.

Options

Name	Type	Default	Description
type	string	Required	custom:simple-weather-clock
clock	string	Required	sensor with the time
topleft	string		sensor to show in top left slot
topcenter	string		sensor to show in top center slot
topright	string		sensor to show in top right slot
bottomleft	string		sensor to show in bottom left slot
bottomcenter	string		sensor to show in bottom center slot
bottomright	string		sensor to show in bottom right slot
background	string	#000000	CSS color for background
font	string	IBM Plex Mono	font to use (must be installed as a resource, otherwise generic serif font is used)
fontweight	integer	700	CSS font-weight for clock and slots
clockfontsize	integer	260	CSS font-size for clock
infofontsize	integer	85	CSS font-size for info slots
opacity	float	0.7	opacity for measurement display in the slots
clockcolor	string	#dddddd	CSS color for clock digits (white-ish)
topleftcolor	string	#008001	CSS color for top left slot (green)
topcentercolor	string	#fe0000	CSS color for top center slot (red)
toprightcolor	string	#bdb76b	CSS color for top center slot (soft yellow)
bottomleftcolor	string	#008001	CSS color for bottom left slot (green)
bottomcentercolor	string	#1f90ff	CSS color for bottom center slot (soft blue)
bottomrightcolor	string	#bdb76b	CSS color for bottom center slot (soft yellow)
displaywidth	integer	800	width (in px) of display on which this will be displayed
displayheight	integer	480	height (in px) of display on which this will be displayed
viewportheight	integer or text	100	height of the black background; if no measurement is included, it's in vh, otherwise it's the measurement you include (px, etc)
offset	integer	0	change vertical position of card (in px)
clockspacing	integer	0	change space between clock and info slots (in px)
infospacing	integer	0	change space between info rows (in px)
infoedge	integer	0	change space between edge of display and edge of info slots (in px)

The defaults are set for a RaspberryPi 7" touch display. The default colors assume the following:

• outdoor information in the left column
• forecast high in the middle upper slot
• forecast low in the middle lower slot
• indoor information in the right column

If you change the display width and height, you'll want to adjust the font sizes to fit. The card will do some amount of automatic respacing based on font size, but you can also manually fine tune it as needed with the other options.

Example

- type: custom:simple-weather-clock
  clock: sensor.normaltime
  topleft: sensor.temp_outdoor
  bottomleft: sensor.humidity_outdoor
  topcenter: sensor.openweathermap_forecast_temperature
  bottomcenter: sensor.openweathermap_forecast_temperature_low
  topright: sensor.temp_livingroom
  bottomright: sensor.humidity_livingroom

Advaned Example
You can use something like the config-template-card to have one clock card for multiple clocks showing slightly different information.

type: custom:config-template-card
variables:
  currentUser: user.name
  whichSensor: |
    theuser => {
      if (theuser == 'Bedroom Clock') {
        return ['sensor.temp_bedroom', 'sensor.humidity_bedroom']
      }
      else if (theuser == 'Study Clock') {
        return ['sensor.temp_study', 'sensor.humidity_study']
      }
      return ['sensor.temp_livingroom', 'sensor.humidity_livingroom']
    }
entities:
  - sensor.normaltime
  - sensor.temp_outdoor
  - sensor.humidity_outdoor
  - sensor.openweathermap_forecast_temperature
  - sensor.openweathermap_forecast_temperature_low
  - ${ whichSensor(currentUser)[0] }
  - ${ whichSensor(currentUser)[1] }
card:
  type: custom:simple-weather-clock
  clock: sensor.normaltime
  topleft: sensor.temp_outdoor
  bottomleft: sensor.humidity_outdoor
  topcenter: sensor.openweathermap_forecast_temperature
  bottomcenter: sensor.openweathermap_forecast_temperature_low
  topright: ${ whichSensor(currentUser)[0] }
  bottomright: ${whichSensor(currentUser)[1] }