piqueen314 / applause_btn

python code to make a button play an applause sound

applause_btn

python 3 code to make a button play an applause sound

To use this code your raspberry pi must have

1. rpi.gpio Install this library with pip: pip install rpi.gpio

2. pygame sudo apt-get update sudo apt-get install python3-pygame

3. flite sudo apt-get install flite

4. applause-1.wav wget http://www.pacdv.com/sounds/people_sound_effects/applause-1.wav

Some special Raspberry pi configurations also need to be set

You must set the Rpi output audio to 3.5mm (headphone) jack to access this configuration use command: sudo rasp-config

Make sure you can hear audio play back with the following terminal commands: amixer set PCM unmute amixer set PCM 100% Test that these commands worked with the following command: amixer