pierremolinaro / acan2517FD

Distribution of Arduino driver for MCP2517FD CAN controller (CANFD mode)

pierremolinaro/acan2517FD Issues

Issue while trying to send message with len of 7
Updated 17 days ago
Arduino Nano RequestedModeTimeOut
Closed 2 months ago2
ESP32-S3 + MCP2518FD
Updated 6 days ago11
Trying to run on Arduino Giga R1
Updated 3 months ago21
Additional features
Closed 10 months ago8
Problem with arduino due
Updated a year ago3
Problem Recieving messages with MCP2517FD Click
Updated 2 months ago5
MCP2517FD CLICK with an Arduino UNO
Updated a year ago
Trying to run on Raspberry Pico
Updated 2 years ago5
Conventional/Normal CAN messages possible?
Closed 2 years ago2
Packet sending issue with configuration error 0x1 with wemos lolin ESP32 and MCP2518FD click
Closed 3 years ago
assertCS/deassertCS could be improved by directly writing to the registers
Closed a year ago
Code using millis() is not overflow-safe
Closed a year ago
noInterrupts() and Interrupts() call potentially unneccesary
Updated 3 years ago1
CANMessage in CANMessage.h
Closed 2 years ago9
Software Buffer is overflowing instead of filling the hardware buffer
Updated 3 years ago7
SPI connection with Arduino Nano 33 BLE
Updated 2 years ago5
Cannot work with CAN FD 500kbps and 5Mbps
Closed 3 years ago2
schematic
Updated 3 years ago1
Setting configuration error 0x10000 with ESP32 and MCP2518FD Click
Closed 4 years ago7
inSettings.mDataBitRateFactor error in ACAN2517.cpp
Closed 4 years ago1
Problem with SPI Communication
Updated 2 years ago9
Possible Bug regarding Retransmission Setting
Closed 4 years ago4
Issue with Buffer.
Updated 2 years ago
Only one CANFD message is being sent
Closed 2 years ago
10K ohm resistor on CS pin
Closed 4 years ago12
Error sending a message over CAN
Closed 4 years ago12
Can't loopback new library with an arduino mega
Closed 2 years ago8
Operation Mode is not changing using arduino uno Loopback example
Closed 5 years ago21
Issues initializing ACan2517FD with Arduino Due
Closed 5 years ago3
No data rate switching in CAN FD mode
Closed 5 years ago3
SPI doesn't work on Arduino UNO
Closed 5 years ago8
Configuration error 0x20000
Closed 5 years ago4