Florian (DF2ET)'s repositories
ConverterDisplay
Nextion TFT display control for AMSAT-DL Es'Hail2 QO-100 Up/Down Converters
CloudLogCatQt
Qt app (Linux, Windows, Mac) for providing CAT support for Cloudlog http://www.cloudlog.co.uk/
cloudLogOffline
An App as Offline Frontend for CloudLog
esp32-eink-sat-timerstatus
Display active FM sats on eInk display
gr-osmosdr
Mirrored from git://git.osmocom.org/gr-osmosdr
gr-satellites
GNU Radio decoders for several Amateur satellites
M17Gateway
A gateway to the M17 reflectors
MMDVM
The firmware for the MMDVM (Multi-Mode Digital Voice Modem)
NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3. It omits the battery charging and Bluetooth components of the TNC3. It presents as a KISS TNC over a USB serial port. This repository contains the build instruction
NXDNClients
A gateway, parrot and reflector for NXDN.
QO100_SPK_ctrl
Speaker control unit for full-duplex satellite operations for the sake of demonstration
qsstv_cloudlog
Python script to upload QSO data from qsstv
SatPC32-To-Cloudlog
C# Application that interfaces SatPC32 :satellite: DDE interface to Cloudlog. Allowing pre populating of satellite name, modes & frequencies.
trackdirect
APRS Track Direct is a collection of tools that can be used to run an APRS website.
WordClock
A custom WordClock project.