httplog
+++ This is the README for version 0.99.0 and higher. If you're on previous versions, please refer to this README version, since the configuration syntax has changed.+++
Log outgoing HTTP requests made from your application. Helps with debugging pesky API error responses, or just generally understanding what's going on under the hood.
+++Requires ruby 2.2 or higher. If you're stuck with an older version of ruby for some reason, you're stuck with httplog v0.3.3.+++
This gem works with the following ruby modules and libraries:
These libraries are at least partially supported, where they use one of the above as adapters, but not explicitly tested - YMMV:
In theory, it should also work with any library built on top of these. But the difference between theory and practice is bigger in practice than in theory.
This is very much a development and debugging tool; it is not recommended to use this in a production environment as it is monkey-patching the respective HTTP implementations. You have been warned - use at your own risk.
Installation
gem install httplog
Usage
require 'httplog' # require this *after* your HTTP gem of choice
By default, this will log all outgoing HTTP requests and their responses to $stdout on DEBUG level.
Notes on content types
- Binary data from response bodies (as indicated by the
Content-Type
header)is not logged. - Text data (
text/*
and mostapplication/*
types) is encoded as UTF-8, with invalid characters replaced. If you need to inspect raw non-UTF data exactly as sent over the wire, this tool is probably not for you.
Configuration
You can override the following default options:
HttpLog.configure do |config|
# Enable or disable all logging
config.enabled = true
# You can assign a different logger
config.logger = Logger.new($stdout)
# I really wouldn't change this...
config.severity = Logger::Severity::DEBUG
# Tweak which parts of the HTTP cycle to log...
config.log_connect = true
config.log_request = true
config.log_headers = false
config.log_data = true
config.log_status = true
config.log_response = true
config.log_benchmark = true
# ...or log all request as a single line by setting this to `true`
config.compact_log = false
# Prettify the output - see below
config.color = false
# Limit logging based on URL patterns
config.url_whitelist_pattern = /.*/
config.url_blacklist_pattern = nil
end
If you want to use this in a Rails app, I'd suggest configuring this specifically for each environment. A global initializer is not a good idea since HttpLog
will be undefined in production. Because you're not using this in production, right? :)
# config/environments/development.rb
HttpLog.configure do |config|
config.logger = Rails.logger
end
You can colorize the output to make it stand out in your logfile:
HttpLog.configure do |config|
config.color = {color: :black, background: :light_red}
end
For more color options please refer to the colorize documentation
Compact logging
If the log is too noisy for you, but you don't want to completely disable it either, set the compact_log
option to true
. This will log each request in a single line with method, request URI, response status and time, but no data or headers. No need to disable any other options individually.
Example
With the default configuration, the log output might look like this:
D, [2012-11-21T15:09:03.532970 #6857] DEBUG -- : [httplog] Connecting: localhost:80
D, [2012-11-21T15:09:03.533877 #6857] DEBUG -- : [httplog] Sending: GET http://localhost:9292/index.html
D, [2012-11-21T15:09:03.534499 #6857] DEBUG -- : [httplog] Status: 200
D, [2012-11-21T15:09:03.534544 #6857] DEBUG -- : [httplog] Benchmark: 0.00057 seconds
D, [2012-11-21T15:09:03.534578 #6857] DEBUG -- : [httplog] Response:
<html>
<head>
<title>Test Page</title>
</head>
<body>
<h1>This is the test page.</h1>
</body>
</html>
With compact_log
enabled, the same request might look like this:
[httplog] GET http://localhost:9292/index.html completed with status code 200 in 0.00057 seconds
Known Issues
-
Requests types other than GET and POST have not been explicitly tested. They may or may not be logged, depending on the implementation details of the underlying library. If they are not for a particular library, please feel free to open an issue with the details.
-
When using OpenURI, the reading of the HTTP response body is deferred, so it is not available for logging. This will be noted in the logging statement:
D, [2012-11-21T15:09:03.547005 #6857] DEBUG -- : [httplog] Connecting: localhost:80 D, [2012-11-21T15:09:03.547938 #6857] DEBUG -- : [httplog] Sending: GET http://localhost:9292/index.html D, [2012-11-21T15:09:03.548615 #6857] DEBUG -- : [httplog] Status: 200 D, [2012-11-21T15:09:03.548662 #6857] DEBUG -- : [httplog] Benchmark: 0.000617 seconds D, [2012-11-21T15:09:03.548695 #6857] DEBUG -- : [httplog] Response: (not available yet)
-
When using HTTPClient, the TCP connection establishment will be logged after the HTTP request and headers, due to the way HTTPClient is organized.
D, [2012-11-22T18:39:46.031698 #12800] DEBUG -- : [httplog] Sending: GET http://localhost:9292/index.html D, [2012-11-22T18:39:46.031756 #12800] DEBUG -- : [httplog] Header: accept: */* D, [2012-11-22T18:39:46.031788 #12800] DEBUG -- : [httplog] Header: foo: bar D, [2012-11-22T18:39:46.031942 #12800] DEBUG -- : [httplog] Connecting: localhost:9292 D, [2012-11-22T18:39:46.033409 #12800] DEBUG -- : [httplog] Status: 200 D, [2012-11-22T18:39:46.033483 #12800] DEBUG -- : [httplog] Benchmark: 0.001562 seconds
-
Also when using HTTPClient, make sure you include
httplog
afterhttpclient
in yourGemfile
. -
When using Ethon or Patron, and any library based on them (such as Typhoeus), the TCP connection is not logged (since it's established by libcurl).
-
Benchmarking only covers the time between starting the HTTP request and receiving the response. It does not cover the time it takes to establish the TCP connection.
Running the specs
Make sure you have the necessary dependencies installed by running bundle install
.
Then simply run bundle exec rspec spec
.
This will launch a simple rack server on port 9292 and run all tests locally against that server.
Contributing
If you have any issues with httplog, or feature requests, please add an issue on GitHub or fork the project and send a pull request. Please include passing specs with all pull requests.
Contributors
Thanks to these fine folks for contributing pull requests: