Love your async code again with Hydra
Made with ♥ in pure Swift 3+, no dependencies, lightweight & fully portable
★★ Star our github repository to help us! ★★
Created by Daniele Margutti (@danielemargutti)
Hydra is full-featured lightweight library which allows you to write better async code in Swift 3+. It's partially based on JavaScript A+ specs and also implements modern construct like await
(as seen in Async/Await specification in ES8 (ECMAScript 2017) or C#) which allows you to write async code in sync manner.
Hydra supports all sexiest operators like always
, validate
, timeout
, retry
, all
, any
, pass
, recover
, map
, zip
, defer
and retry
.
Starts writing better async code with Hydra!
A more detailed look at how Hydra works can be found in ARCHITECTURE file or on Medium.
Do you like Hydra
? I'm also working on several other opensource libraries.
Take a look here:
- SwiftDate - Date & Timezone management in Swift
- SwiftLocation - CoreLocation and Beacon Monitoring on steroid!
- SwiftRichString - Elegant and painless attributed string in Swift
- SwiftScanner - String scanner in pure Swift with full unicode support
- SwiftSimplify - Tiny high-performance Swift Polyline Simplification Library
- SwiftMsgPack - MsgPack Encoder/Decoder in Swit
Latest release is: 0.9.2 Download here.
A complete list of changes for each release is available in the CHANGELOG file.
- What's a Promise
- Create a Promise
- How to use a Promise
- Chaining Multiple Promises
- Await & Async: async code in sync manner
- All Features
- Installation (CocoaPods, SwiftPM and Carthage)
- Requirements
- Credits
A Promise is a way to represent a value that will exists, or will fail with an error, at some point in the future. You can think about it as a Swift's Optional
: it may or may not be a value. A more detailed article which explain how Hydra was implemented can be found here.
Each Promise is strong-typed: this mean you create it with the value's type you are expecting for and you will be sure to receive it when Promise will be resolved (the exact term is fulfilled
).
A Promise is, in fact, a proxy object; due to the fact the system knows what success value look like, composing asynchronous operation is a trivial task; with Hydra you can:
- create a chain of dependent async operation with a single completion task and a single error handler.
- resolve many independent async operations simultaneously and get all values at the end
- retry or recover failed async operations
- write async code as you may write standard sync code
- resolve dependent async operations by passing the result of each value to the next operation, then get the final result
- avoid callbacks, pyramid of dooms and make your code cleaner!
Creating a Promise is trivial; you need to specify the context
(a GCD Queue) in which your async operations will be executed in and add your own async code as body
of the Promise.
This is a simple async image downloader:
func getImage(url: String) -> Promise<UIImage> {
return Promise<UIImage>(in: .background, { resolve, reject in
self.dataTask(with: request, completionHandler: { data, response, error in
if let error = error {
reject(error)
} else if let data = data, let response = response as? HTTPURLResponse {
resolve((data, response))
} else {
reject("Image cannot be decoded")
}
}).resume()
})
}
You need to remember only few things:
- a Promise is created with a type: this is the object's type you are expecting from it once fulfilled. In our case we are expecting an
UIImage
so our Promise isPromise<UIImage>
(if a promise fail returned error must be conform to Swift'sError
protocol) - your async code (defined into the Promise's
body
) must alert the promise about its completion; if you have the fulfill value you will callresolve(yourValue)
; if an error has occurred you can callreject(occurredError)
or throw it using Swift'sthrow occurredError
. - the
context
of a Promise define the Grand Central Dispatch's queue in which the async code will be executed in; you can use one of the defined queues (.background
,.userInitiated
etc. Here you can found a nice tutorial about this topic)
Using a Promise is even easier.
You can get the result of a promise by using then
function; it will be called automatically when your Promise fullfill with expected value.
So:
getImage(url).then(.main, { image in
myImageView.image = image
})
As you can see even then
may specify a context (by default - if not specified - is the main thread): this represent the GCD queue in which the code of the then's block will be executed (in our case we want to update an UI control so we will need to execute it in .main
thread).
But what happened if your Promise fail due to a network error or if the image is not decodable? catch
func allows you to handle Promise's errors (with multiple promises you may also have a single errors entry point and reduce the complexity).
getImage(url).then(.main, { image in
myImageView.image = image
}).catch(.main, { error in
print("Something bad occurred: \(error)")
})
Chaining Promises is the next step thought mastering Hydra. Suppose you have defined some Promises:
func loginUser(_ name:String, _ pwd: String)->Promise<User>
func getFollowers(user: User)->Promise<[Follower]>
func unfollow(followers: [Follower])->Promise<Int>
Each promise need to use the fulfilled value of the previous; plus an error in one of these should interrupt the entire chain.
Doing it with Hydra is pretty straightforward:
loginUser(username,pass).then(getFollowers).then(unfollow).then { count in
print("Unfollowed \(count) users")
}.catch { err in
// Something bad occurred during these calls
}
Easy uh? (Please note: in this example context is not specified so the default .main
is used instead).
Have you ever dream to write asynchronous code like its synchronous counterpart? Hydra was heavily inspired by Async/Await specification in ES8 (ECMAScript 2017) which provides a powerful way to write async doe in a sequential manner.
Using async
and await
is pretty simple.
For example the code above can be rewritten directly as:
// With `async` we have just defined a Promise which will be executed in a given
// context (if omitted `background` thread is used) and return an Int value.
let asyncFunc = async({ _ -> Int // you must specify the return of the Promise, here an Int
// With `await` the async code is resolved in a sync manner
let loggedUser = try await(loginUser(username,pass))
// one promise...
let followersList = try await(getFollowers(loggedUser))
// after another...
let countUnfollowed = try await(unfollow(followersList))
// ... linearly
// Then our async promise will be resolved with the end value
return countUnfollowed
}).then({ value in // ... and, like a promise, the value is returned
print("Unfollowed \(value) users")
})
Like magic! Your code will run in .background
thread and you will get the result of each call only when it will be fulfilled. Async code in sync sauce!
Important Note: await
is a blocking/synchronous function implemented using semaphore. Therefore, it should never be called in main thread; this is the reason we have used async
to encapsulate it. Doing it in main thread will also block the UI.
async
func can be used in two different options:
- it can create and return a promise (as you have seen above)
- it can be used to simply execute a block of code (as you will see below)
As we said we can also use async
with your own block (without using promises); async
accepts the context (a GCD queue) and optionally a start delay interval.
Below an example of the async function which will be executed without delay in background:
async({
print("And now some intensive task...")
let result = try! await(.background, { resolve,reject in
delay(10, context: .background, closure: { // jut a trick for our example
resolve(5)
})
})
print("The result is \(result)")
})
There is also an await operator:
- await with throw:
..
followed by a Promise instance: this operator must be prefixed bytry
and should usedo/catch
statement in order to handle rejection of the Promise. - await without throw:
..!
followed by a Promise instance: this operator does not throw exceptions; in case of promise's rejection result is nil instead.
Examples:
async({
// AWAIT OPERATOR WITH DO/CATCH: `..`
do {
let result_1 = try ..asyncOperation1()
let result_2 = try ..asyncOperation2(result_1) // result_1 is always valid
} catch {
// something goes bad with one of these async operations
}
})
// AWAIT OPERATOR WITH NIL-RESULT: `..!`
async({
let result_1 = ..!asyncOperation1() // may return nil if promise fail. does not throw!
let result_2 = ..!asyncOperation2(result_1) // you must handle nil case manually
})
When you use these methods and you are doing asynchronous, be careful to do nothing in the main thread, otherwise you risk to enter in a deadlock situation.
Because promises formalize how success and failure blocks look, it's possible to build behaviors on top of them. Hydra supports:
always
: allows you to specify a block which will be always executed both forfulfill
andreject
of the Promisevalidate
: allows you to specify a predica block; if predicate returnfalse
the Promise fails.timeout
: add a timeout timer to the Promise; if it does not fulfill or reject after given interval it will be marked as rejected.all
: create a Promise that resolved when the list of passed Promises resolves (promises are resolved in parallel). Promise also reject as soon as a promise reject for any reason.any
: create a Promise that resolves as soon as one passed from list resolves. It also reject as soon as a promise reject for any reason.pass
: Perform an operation in the middle of a chain that does not affect the resolved value but may reject the chain.recover
: Allows recovery of a Promise by returning another Promise if it fails.map
: Transform items to Promises and resolve them (in paralle or in series)zip
: Create a Promise tuple of a two promisesdefer
: defer the execution of a Promise by a given time interval.
always
func is very useful if you want to execute code when the promise fulfills — regardless of whether it succeeds or fails.
showLoadingHUD("Logging in...")
loginUser(username,pass).then { user in
print("Welcome \(user.username)")
}.catch { err in
print("Cannot login \(err)")
}.always {
hideLoadingHUD()
}
validate
is a func that takes a predicate, and rejects the promise chain if that predicate fails.
getAllUsersResponse().validate { httpResponse in
guard let httpResponse.statusCode == 200 else {
return false
}
return true
}.then { usersList in
// do something
}.catch { error in
// request failed, or the status code was != 200
}
timeout
allows you to attach a timeout timer to a Promise; if it does not resolve before elapsed interval it will be rejected with .timeoutError
.
loginUser(username,pass).timeout(.main, 10, .MyCustomTimeoutError).then { user in
// logged in
}.catch { err in
// an error has occurred, may be `MyCustomTimeoutError
}
all
is a static method that waits for all the promises you give it to fulfill, and once they have, it fulfills itself with the array of all fulfilled values (in order).
If one Promise fail the chain fail with the same error.
Execution of all promises is done in parallel.
let promises = usernameList.map { return getAvatar(username: $0) }
all(promises).then { usersAvatars in
// you will get an array of UIImage with the avatars of input
// usernames, all in the same order of the input.
// Download of the avatar is done in parallel in background!
}.catch { err in
// something bad has occurred
}
any
easily handle race conditions: as soon as one Promise of the input list resolves the handler is called and will never be called again.
let mirror_1 = "https://mirror1.mycompany.com/file"
let mirror_2 = "https://mirror2.mycompany.com/file"
any(getFile(mirror_1), getFile(mirror_2)).then { data in
// the first fulfilled promise also resolve the any Promise
// handler is called exactly one time!
}
pass
is useful for performing an operation in the middle of a promise chain without changing the type of the Promise.
You may also reject the entire chain.
You can also return a Promise from the tap handler and the chain will wait for that promise to resolve (see the second then
in the example below).
loginUser(user,pass).pass { userObj in
print("Fullname is \(user.fullname)")
}.then { userObj in
updateLastActivity(userObj)
}.then { userObj in
print("Login succeded!")
}
recover
allows you to recover a failed Promise by returning another.
let promise = Promise<Int>(in: .background, { fulfill, reject in
reject(AnError)
}).recover({ error in
return Promise(in: .background, { (fulfill, reject) in
fulfill(value)
})
})
Map is used to transform a list of items into promises and resolve them in parallel or serially.
[urlString1,urlString2,urlString3].map {
return self.asyncFunc2(value: $0)
}.then(.main, { dataArray in
// get the list of all downloaded data from urls
}).catch({
// something bad has occurred
})
zip
allows you to join different promises (2,3 or 4) and return a tuple with the result of them. Promises are resolved in parallel.
Promise<Void>.zip(a: getUserProfile(user), b: getUserAvatar(user), c: getUserFriends(user))
.then { profile, avatar, friends in
// ... let's do something
}.catch {
// something bad as occurred. at least one of given promises failed
}
As name said, defer
delays the executon of a Promise chain by some number of seconds from current time.
asyncFunc1().defer(.main, 5).then...
retry
operator allows you to execute source chained promise if it ends with a rejection.
If reached the attempts the promise still rejected chained promise is also rejected along with the same source error.
// try to execute myAsyncFunc(); if it fails the operator try two other times
// If there is not luck for you the promise itself fails with the last catched error.
myAsyncFunc(param).retry(3).then { value in
print("Value \(value) got at attempt #\(currentAttempt)")
}.catch { err in
print("Failed to get a value after \(currentAttempt) attempts with error: \(err)")
}
Conditional retry allows you to control retryable if it ends with a rejection.
// If myAsyncFunc() fails the operator execute the condition block to check retryable.
// If return false in condition block, promise state rejected with last catched error.
myAsyncFunc(param).retry(3) { (remainAttempts, error) -> Bool in
return error.isRetryable
}.then { value in
print("Value \(value) got at attempt #\(currentAttempt)")
}.catch { err in
print("Failed to get a value after \(currentAttempt) attempts with error: \(err)")
}
You can install Swiftline using CocoaPods, carthage and Swift package manager
use_frameworks!
pod 'HydraAsync'
github 'malcommac/Hydra'
Add swiftline as dependency in your Package.swift
import PackageDescription
let package = Package(name: "YourPackage",
dependencies: [
.Package(url: "https://github.com/malcommac/Hydra.git", majorVersion: 0),
]
)
Current version is compatible with:
- Swift 3.0+
- iOS 8.0 or later
- tvOS 9.0 or later
- macOS 10.10 or later
- watchOS 2.0 or later
- Linux compatible environments
Hydra is owned and maintained by Daniele Margutti.
As open source creation any help is welcome!
The code of this library is licensed under MIT License; you can use it in commercial products without any limitation.
The only requirement is to add a line in your Credits/About section with the text below:
This software uses open source Hydra's library to manage async code.
Web: http://github.com/malcommac/Hydra
Created by Daniele Margutti and licensed under MIT License.