Giters

paullockaby / preseed

Preseed configuration for the Debian installer.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

debian

System Installer "preseed" Script

This is a script for building a new installer for Debian "bullseye" using a technique called a "preseeding". By using a "preseed" script we tell the installer the answer to a lot of routine questions to give ourselves a standard environment for new hosts. The script in this repository does the following:

  • Creates a "paul" user with a known password and an SSH authorized_keys file and a known good environment.
  • Builds an LVM configuration with an 8GB swap partition and the rest of the disk for data using XFS as a file system instead of ext4.
  • Enables "security" and "updates" repositories but does not enable backports, sources or automatic updates.
  • Fixes the systemd timesync configuration.
  • Fixes the /etc/resolv.conf file.
  • Installs standard system utilities and an SSH server.
  • Installs some additional basic, common software.

When using the installer there are still several questions that you must answer. These include:

  • If there are multiple active interfaces you must choose one.
  • What IP address and host name to use for this new host.
  • Which disk to use for the installation. WARNING! This disk will be erased.
  • Which disk will receive the master boot record.

Otherwise this will create an entirely automated installation.

How To Use This Script

Follow these steps to run this script:

  1. Get on a Debian host!
  2. Download an netinstall image from the Debian website.
  3. Clone this repository.
  4. Install these libraries: apt-get install -y --no-install-recommends xorriso isolinux pwgen
  5. Run the build script: ./build /path/to/debian-11.x.x-amd64-netinst.iso /path/to/preseed-debian-11.x.x-amd64-netinst.iso
  6. Use the new ISO file to build your host.

Note that the preseed.cfg file has no password for logging in as the "paul" user. You can set a password or just use SSH keys. You can change the password by following these steps:

  1. Put the new password in a text file. Call it something like "newpassword.txt".
  2. Generate the new password: cat newpassword.txt | mkpasswd -s -m sha-512 -S "$(pwgen -ns 16 1)"
  3. Place that new password in the preseed.cfg file.
  4. Remove newpassword.txt and definitely do not put it into source control.

Using the "preseed" ISO

Use this ISO just like you would any other install ISO. A preseeded ISO file can build baremetal systems or virtual machines. It is only useful for on-premise instances and is not useful for cloud instances.

Building a USB Boot Disk on macOS

I'm always having to look this up so here are the steps.

  1. Unmount the disk where diskXX is your USB disk: diskutil unmountDisk /dev/diskXX
  2. Convert the ISO file into a DMG file: hdiutil convert -format UDRW -o preseed ./preseed.iso
  3. Write the DMG file to your USB disk: sudo dd if=./preseed.dmg of=/dev/diskXX bs=1m

Your thumb drive is now bootable.

Building a USB Boot Disk on Linux

I'm also always having to look this up so here are the steps.

  1. Attach the USB disk. Use lsblk to see what the device label is that the USB disk has received.
  2. Write the ISO file to your USB disk: sudo dd bs=4M if=preseed.iso of=/dev/XXX conv=fdatasync

More Information

These links are where I got most of the information for building this preseed script.

About

Preseed configuration for the Debian installer.

debian

Languages

Language:Shell 98.7%Language:Vim Script 1.3%