pascaltippelt / raspberrypiGPIOWeb

Raspberry Pi GPIO Web Control

This project enables you to simple, fast and easy control your GPIOs on a Raspberry Pi or other Wiringpi-compatible board running a linux os. The example-configuration is for a 8 relais module with low-triggered io like this one (paid link).

Prerequisites

• Wiringpi compatible board
• Linux OS with apache2 and php (recommended: Debian or derivate)

1-2-3 Installation

1. Get the install script: wget https://raw.githubusercontent.com/pascaltippelt/raspberrypiGPIOWeb/main/install.sh
2. Make the script executeable: chmod +x install.sh
3. Execute the installer as root: sudo ./install.sh

Usage

After the installation you may access your GPIO control via http://[IP of your Board]:8080 . E.g.: http://192.168.0.100:8080