This repo contains instructions for building a timeserver using GPS/PPS as the reference clock. It uses NTP and PTP to share time with the local network.
The key hardware components used are:
- RaspberryPi 5B
- BerryGPS-IMU v4
- GPS External Antenna
- RaspberryPi 4B
- Network switch
- Network cables
You'll also need SD cards, power supplies and probably cases for your RaspberryPis.
The Pi5B has a network card with support for PTP hardware timestamping, although it could also be done with PTP software timestamping on an earlier version of the Pi.
The Pi4 is used for the client because I had one already. The setup described for the Pi4 client should be easily transferred to any Linux machine.
The images below show the Pi5 with the BerryGPS-IMU HAT attached, and the complete hardware system:
 |
 |
And the software components are a bit like this:
Instructions for the server setup are here
Instructions for the client setup are here
Instructions for customising the GPS configuration are here
Great Example using NTP
RaspberryPi
- https://www.raspberrypi.com/products/raspberry-pi-5/
- https://www.raspberrypi.com/software/
- https://www.raspberrypi.com/documentation/
BerryGPS-IMU
UARTs
- https://www.raspberrypi.com/documentation/computers/configuration.html#configuring-uarts
- https://forums.raspberrypi.com/viewtopic.php?t=359132
PPS
- https://www.kernel.org/doc/html/latest/driver-api/pps.html
- https://forums.raspberrypi.com/viewtopic.php?t=195011
GPSd
- https://gpsd.io/
- https://gpsd.io/gpsd-time-service-howto.html#_providing_local_ntp_service_using_ptp
Chrony
- https://gpsd.io/gpsd-time-service-howto.html#_feeding_chrony_from_gpsd
- https://chrony-project.org/
- https://chrony-project.org/comparison.html
PTP