ozkan / Cockpit_BLE_Keyboard

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Cockpit BLE

Cockpit BLE

Features

  • USB C charging ports with ESD protection on data and power lines
  • Multi-channel Bluetooth Low Energy (pair with 5 devices)
  • Open-source ZMK platform for maximum customization
  • Configure layout using the web-based configurator on GitHub
  • Arm CryptoCell CC310 crytographic security module

Board:

  • PCB Switch Socket: Kailh Hot-swappable (Qty:42)
  • Connector:USB-C
  • Battery Charger:4.2V Lithium 300mA
  • Rotary encoder : Ec11 (Qty:2)
  • Knob: 21x17mm alu (Qty:2)
  • Display: 128x32 Oled Lcd (SSD1306)
  • RGB Underglow: WS2812B rgb let (Qty:13)

Microcontroller:

  • Nordic nRF52840 QIAACO
  • Flash: 1MB
  • RAM: 256KB
  • Debug: SWD programmer

Bluetooth:

  • Bluetooth:5.0
  • Protocol: BLE 4.0, BLE 5.0
  • BLE Antenna:Ceramic Antenna
  • BT Range: 500 meters for bluetooth 5.0
  • Sensitivity: -96dBm

PCB : (Dimension: 300 x 120 x 1.6 mm)

  • Holyiot 18010 Nordic nRF52840 module: 1
  • OLED (SSD1306) : 1
  • Battery (402050 3.7V 300Mah Lityum Polimer): 1
  • Kailh Hot-swappable PCB Socket : 42
  • WS2812B (RGB Underglow led): 13
  • RotaryEncoder (EC11):2
  • Silver Aluminium Knob (21x17mm,Plum Shaft) : 2
  • TYPE-C-31-M-12 (type-c socket): 1
  • TP4054-42-SOT25-R (Standalone Li-Ion Battery Charger ) : 1
  • Q_PMOS_GSD : 1
  • AO3407 : 1
  • XC6206PxxxMR-Regulator_Linear : 1
  • 1N4148W: 44
  • SS14 (Schottky Diode ) : 1
  • SMD Fuse Fast Blow 500mA (or OR resistor): 1
  • Slide switch (Battery on-off): 1 (AEO)
  • Push SW (reset): 1
  • KT-0603R (Bootloader indicator) : 1
  • 19-217/BHC-ZL1M2RY/3T (Battery management indicator): 1
  • 47uF Capacitor: 2
  • 4.7uF Capacitor: 6
  • 1uF Capacitor: 1
  • 2M Resistor: 2
  • 33R Resistor: 2
  • 470R Resistor: 1
  • 5.1K Resistor: 2
  • 820K Resistor: 1
  • 100K Resistor: 1
  • 2K Risistor: 3
  • 4.7k Resistor: 6

Case: (Dimension: 300 x 120 mm)

  • Switch plate: 1.2mm İnox (304)
  • Upper middle plate: 4mm transparent acrylic
  • Bottom middle plate: 3mm frosted acrylic
  • Bottom plate: 1.5mm frosted acrylic
  • 3M Silicone Rubber feet: 8x
  • Standoff Spacer: 10x m2x8
  • Screw (Stainless Steel 304): 16x m2x5, 4x m2x8
  • Oled cover: 4mm acrylic,inox

ZMK Firmware

PCB

Cockpit BLE

About