orionhealth / puppet-strongswan

puppet-strongswan

This Puppet module contains configurations for strongSwan.

Build status

Example usage

strongSwan can be installed by simply doing:

include strongswan

Default configuration

conn %default configurations can be set as follows, please note that while this is a working example, the toppings should be adjusted for one's preference:

strongswan::conn { '%default':
  options => {
    "ike"         => "aes128gcm128-prfsha256-ecp256!",
    "esp"         => "aes128gcm128-ecp256!",
    "keyexchange" => "ikev2",
    "ikelifetime" => "60m",
    "lifetime"    => "20m",
    "margintime"  => "3m",
    "closeaction" => "restart",
    "dpdaction"   => "restart",
    "compress"    => "no",
  }
}

Peer configuration

Parameters for an IPsec peer:

strongswan::conn { 'peer':
  options => {
    "left"         => "10.0.1.1",
    "leftcert"     => 'peerCert.der',
    "leftfirewall" => 'no',
    "leftid"       => '"C=UK, CN=Peer 1"',
    "leftsubnet"   => "10.0.1.0/24",
    "right"        => '10.0.2.1',
    "rightauth"    => 'pubkey',
    "rightid"      => '"C=UK, CN=Peer 2"',
    "rightsubnet"  => '10.0.2.0/24',
    "auto"         => "start",
  }
}

strongswan::secrets { 'peer':
  options => {
    'ECDSA'        => 'peerKey.der',
  }
}

Gateway configuration

Parameters for an IPsec gateway server:

strongswan::conn { 'gateway':
  options => {
    "left"          => '%any',
    "leftcert"      => 'gwCert.der',
    "leftfirewall"  => "yes",
    "leftid"        => '"C=UK, CN=GW"',
    "leftsubnet"    => '10.0.0.0/24',
    "right"         => '%any',
    "rightauth"     => "pubkey",
    "rightsourceip" => '10.0.1.0/24',
    "auto"          => 'add',
  }
}

strongswan::secrets { 'peer':
  options => {
    'ECDSA'         => 'gwKey.der',
  }
}

Gateway charon configuration:

class { 'strongswan::charon':
  dns1                  => "10.0.0.5",
  initiator_only        => "no",
  integrity_test        => "yes",
  group                 => 'nogroup',
  user                  => 'strongswan',
}

Note: This module is solely intended to handle the strongSwan components of the system. Other parts of the infrastructure, such as iptables and sysctl, are to be managed by their respective modules. The following will enable packet forwarding on the gateway node, for instance:

sysctl { 'net.ipv4.ip_forward': value => '1' }

Roadwarrior configuration

Parameters for an IPsec roadwarrior connection:

strongswan::conn { 'roadwarrior':
  options => {
    "keyingtries"  => "%forever",
    "left"         => '%any',
    "leftcert"     => 'rwCert.der',
    "leftid"       => '"C=UK, CN=rw"',
    "right"        => '10.0.0.1',
    "rightid"      => '"C=UK, CN=GW"',
    "rightsubnet"  => '0.0.0.0/0',
    "auto"         => 'start',
  }
}

strongswan::secrets { 'roadwarrior':
  options => {
    'ECDSA'        => 'rwKey.der',
  }
}

charon daemon configuration can also be adjusted, for example, for a client configuration:

class { 'strongswan::charon':
  initiator_only        => "yes",
  integrity_test        => "yes",
  crypto_test_on_add    => "yes",
  crypto_test_on_create => "yes",
  crypto_test_required  => "yes",
}

Setup configuration

The IPsec 'config setup' section can be configured as follows:

class { 'strongswan::setup':
  options => {
    'strictcrlpolicy' => 'yes',
    'charondebug'     => '"ike 2, knl 3, cfg 0"'
  }
}

License

See LICENSE file.