Piglit is a collection of automated tests for OpenGL and OpenCL implementations.
The goal of Piglit is to help improve the quality of open source OpenGL and OpenCL drivers by providing developers with a simple means to perform regression tests.
The original tests have been taken from
- Glean ( http://glean.sf.net/ ) and
- Mesa ( http://www.mesa3d.org/ )
First of all, you need to make sure that the following are installed:
- Python >=3.6
- Python Mako module
- numpy (http://www.numpy.org)
- cmake (http://www.cmake.org)
- GL, glu and glut libraries and development packages (i.e. headers)
- X11 libraries and development packages (i.e. headers)
- waffle (http://www.waffle-gl.org)
Optionally, you can install the following:
- lxml. An accelerated python xml library using libxml2 (http://lxml.de/)
- simplejson. A fast C based implementation of the python json library. (https://simplejson.readthedocs.org/en/latest/)
- jsonstreams. A JSON stream writer for python. (https://jsonstreams.readthedocs.io/en/stable/)
- VkRunner. A shader script testing tool for Vulkan. (https://github.com/igalia/vkrunner)
For testing the python framework using py.test unittests/framework
- py.test. A python test framework, used for running the python framework test suite.
- tox. A tool for testing python packages against multiple configurations of python (https://tox.readthedocs.org/en/latest/index.html)
- mock. A python module for mocking other python modules. Required only for unittests (https://github.com/testing-cabal/mock)
- psutil. A portable process library for python
- jsonschema. A JSON validator library for python
- pytest-mock. A mock plugin for pytest
- pytest-pythonpath. A plugin for pytest to do automagic with sys.path
- pytest-raises. A plugin for pytest that allows decorating tests that expect failure
- pytest-warnings. A plugin for pytest that handles python warnings
- pytest-timeout. A plugin for pytest to timeout tests.
Now configure the build system:
$ ccmake .
This will start cmake's configuration tool, just follow the onscreen instructions. The default settings should be fine, but I recommend you:
-
Press 'c' once (this will also check for dependencies) and then
-
Set
CMAKE_BUILD_TYPE
toDebug
Now you can press 'c' again and then 'g' to generate the build system. Now build everything:$ make
On Linux, if cross-compiling a 32-bit build on a 64-bit host, first make sure
you didn't have CMakeCache.txt file left from 64-bit build (it would retain old
flags), then you must invoke cmake with options
-DCMAKE_SYSTEM_PROCESSOR=x86 -DCMAKE_C_FLAGS=-m32 -DCMAKE_CXX_FLAGS=-m32
.
Install development packages.
$ sudo apt-get install cmake g++ mesa-common-dev libgl1-mesa-dev python3-numpy python3-mako freeglut3-dev x11proto-gl-dev libxrender-dev libwaffle-dev libudev-dev
Configure and build.
$ cmake .
$ make
Install CMake. http://cmake.org/cmake/resources/software.html Download and install 'Mac OSX Universal' platform.
Install Xcode. http://developer.apple.com/xcode
Configure and build.
$ cmake .
$ make
Install development packages.
- cmake
- gcc4
- make
- opengl
- libGL-devel
- python
- python-numpy
- libglut-devel
Configure and build.
$ cmake .
$ make
Install Python 3. http://www.python.org/download
Install CMake. http://cmake.org/cmake/resources/software.html Download and install 'Windows' platform.
Download and install Ninja https://github.com/ninja-build/ninja/releases
Install MinGW-w64 https://mingw-w64.org/
Download OpenGL Core API and Extension Header Files.
http://www.opengl.org/registry/#headers
Pass -DGLEXT_INCLUDE_DIR=/path/to/headers
Install python mako.
pip install mako
Install NumPy.
pip install numpy
Download freeglut for Mingw. http://www.transmissionzero.co.uk/software/freeglut-devel/
cmake -H. -Bbuild -G "Ninja" -DGLEXT_INCLUDE_DIR=\path\to\glext -DGLUT_INCLUDE_DIR=\path\to\freeglut\include -DGLUT_glut_LIBRARY=\path\to\freeglut\lib\x64\libfreeglut.a -DGLEXT_INCLUDE_DIR=\path\to\glext
ninja -C build
Download and build waffle for MinGW. http://www.waffle-gl.org/
Open the Command Prompt. CD to piglit directory.
cmake -H. -Bbuild -G "Ninja" -DGLEXT_INCLUDE_DIR=\path\to\glext -DPIGLIT_USE_WAFFLE=TRUE -DWAFFLE_INCLUDE_DIRS=\path\to\waffle\include\waffle WAFFLE_LDFLAGS=\path\to\waffle\lib\libwaffle-1.a
Make sure that everything is set up correctly:
$ ./piglit run sanity results/sanity
You may include '.py' on the profile, or you may exclude it (sanity vs sanity.py), both are equally valid.
You may also preface test profiles with tests/ (or any other path you like), which may be useful for shell tab completion.
You may provide multiple profiles to be run at the same time:
$ ./piglit run quick_cl gpu deqp_gles3 results/gl-cl-combined
Use
$ ./piglit run
or
$ ./piglit run -h
To learn more about the command's syntax.
Have a look into the tests/ directory to see what test profiles are available:
$ ls tests/*.py
See also section 4.
To create some nice formatted test summaries, run
$ ./piglit summary html summary/sanity results/sanity
Hint: You can combine multiple test results into a single summary. During development, you can use this to watch for regressions:
$ ./piglit summary html summary/compare results/baseline results/current
You can combine as many testruns as you want this way (in theory; the HTML layout becomes awkward when the number of testruns increases)
Have a look at the results with a browser:
$ xdg-open summary/sanity/index.html
The summary shows the 'status' of a test:
- pass: This test has completed successfully.
- warn: The test completed successfully, but something unexpected happened. Look at the details for more information.
- fail: The test failed.
- crash: The test binary exited with a non-zero exit code.
- skip: The test was skipped.
- timeout: The test ran longer than its allotted time and was forcibly killed.
There are also dmesg-* statuses. These have the same meaning as above, but are triggered by dmesg related messages.
There are a number of environment variables that control the way piglit behaves.
-
PIGLIT_COMPRESSION
Overrides the compression method used. The same values that piglit.conf allows for core:compression.
-
PIGLIT_PLATFORM
Overrides the platform run on. These allow the same values as
piglit run -p
. This values is honored by the tests themselves, and can be used when running a single test. -
PIGLIT_FORCE_GLSLPARSER_DESKTOP
Force glslparser tests to be run with the desktop (non-gles) version of glslparsertest. This can be used to test ESX_compatability extensions for OpenGL
-
PIGLIT_NO_FAST_SKIP
Piglit has a mechanism run in the python layer for skipping tests with unmet OpenGL or window system dependencies without starting a new process (which is expensive). Sometimes this system doesn't work or is undesirable, setting this environment variable to True will disable this system.
-
PIGLIT_NO_TIMEOUT
When this variable is true in python then any timeouts given by tests will be ignored, and they will run until completion or they are killed.
-
PIGLIT_VKRUNNER_BINARY
Can be used to override the path to the vkrunner executable for running Vulkan shader tests. Alternatively the config option vkrunner:bin can be used instead. If neither are set then vkrunner will be searched for in the search path.
The way piglit run
and piglit summary
count tests are different,
piglit run
counts the number of Test derived instance in the profile(s)
selected, while piglit summary
counts the number of subtests a result
contains, or it's result if there are no subtests. This means that the number
shown by piglit run
will be less than or equal to the number calculated by
piglit summary
.
Piglit has completions for bash, located in completions/bash/piglit. Once this
file is sourced into bash piglit
and ./piglit
will have tab completion
available. For global availability place the file somewhere that bash will
source the file on startup. If piglit is installed and bash-completions are
available, then this completion file will be installed system-wide.
Test sets are specified as Python scripts in the tests directory. The following test sets are currently available:
- sanity.py This suite contains minimal OpenGL sanity tests. These tests must pass, otherwise the other tests will not generate reliable results.
- all.py This suite contains all OpenGL tests.
- quick.py Run all tests, but cut down significantly on their runtime (and thus on the number of problems they can find).
- gpu.py A further reduced set of tests from quick.py, this runs tests only for hardware functionality and not tests for the software stack.
- llvmpipe.py A reduced set of tests from gpu.py removing tests that are problematic using llvmpipe
- cpu.py This profile runs tests that don't touch the gpu, in other words all of the tests in quick.py that are not run by gpu.py
- glslparser.py A subset of all.py which runs only glslparser tests
- shader.py A subset of all.py which runs only shader tests
- no_error.py A modified version of the test list run as khr_no_error variants
- cl.py This suite contains all OpenCL tests.
- quick_cl.py This runs all of the tests from cl.py as well as tests from opencv and oclconform.
- vulkan.py This suite contains all Vulkan tests. Note that currently all of the Vulkan tests require VkRunner. If it is not installed then all of the tests will be skipped.
- replay.py This profile allows running replayer.py tests from a traces description file. Check its README for further information about the format of the description files and running dependencies.
- xts.py Support for running the X Test Suite using piglit.
- igt.py Support for running Intel-gpu-tools test suite using piglit.
- deqp_egl.py Support for running dEQP's EGL profile with piglit.
- deqp_gles2.py Support for running dEQP's gles2 profile with piglit.
- deqp_gles3.py Support for running dEQP's gles3 profile with piglit.
- deqp_gles31.py Support for running dEQP's gles3.1 profile with piglit.
- deqp_vk.py Support for running the official Khronos Vulkan CTS profile with piglit.
- khr_gl.py Support for running the open source Khronos OpenGL CTS tests with piglit.
- khr_gl45.py Support for running the open source Khronos OpenGL 4.5 CTS tests with piglit.
- cts_gl.py Support for running the closed source Khronos OpenGL CTS tests with piglit.
- cts_gl45.py Support for running the closed source Khronos OpenGL 4.5 CTS tests with piglit.
- cts_gles.py Support for running the closed source Khronos GLES CTS tests with piglit.
- oglconform.py Support for running sub-test of the Intel oglconform test suite with piglit.
Every test is run as a separate process. This minimizes the impact that severe bugs like memory corruption have on the testing process.
Therefore, tests can be implemented in an arbitrary standalone language. C is the preferred language for compiled tests, piglit also supports its own simple formats for test shaders and glsl parser input.
All new tests must be added to the appropriate profile, all.py profile for OpenGL and cl.py for OpenCL. There are a few basic test classes supported by the python framework:
-
PiglitBaseTest
A shared base class for all native piglit tests.It starts each test as a subprocess, captures stdout and stderr, and waits for the test to return.
It provides test timeouts by setting the instances 'timeout' attribute to an integer > 0 which is the number of seconds the test should run.
It interprets output by reading stdout and looking for 'PIGLIT: ' in the output, and then reading any trailing characters as well formed json returning the test result.
This is a base class and should not be used directly, but provides an explanation of the behavior of the following classes.
-
PiglitGLTest
A test class for native piglit OpenGL tests.In addition to the properties of PiglitBaseTest it provides a mechanism for detecting test window resizes and rerunning tests as well as keyword arguments for platform requirements.
-
PiglitCLTest
A test class for native piglit OpenCL tests.It currently provides no special features.
-
GLSLParserTest
A class for testing a glsl parser.It is generally unnecessary to call this class directly as it uses a helper function to search directories for tests.
-
ShaderTest
A class for testing using OpenGL shaders.It is generally unnecessary to call this class directly as it uses a helper function to search directories for tests.
Piglit provides integration for other test suites as well. The rational for this is that it provides piglit's one process per test protections (one test crashing does not crash the whole suite), and access to piglit's reporting tools.
Most integration is done through the use of piglit.conf, or through environment variables, with piglit.conf being the preferred method.
Piglit provides a generic layer for dEQP based test suites, and specific integration for several suites.
I suggest using Chad Versace's repo of dEQP, which contains a gbm target. https://github.com/chadversary/deqp
It should be built as follows:
cmake . -DDEQP_TARGET=gbm -GNinja
Additional targets are available in the targets directory. gbm isn't compatible for most (any?) blob driver, so another target might be necessary if that is a requirement. One of the x11_* targets or drm is probably a good choice.
The use of ninja is optional.
Once dEQP is built add the following information to piglit.conf, which can
either be located in the root of the piglit repo, or in $XDG_CONFIG_HOME
(usually $HOME/.config
).
[deqp-gles2]
bin=<deqp source dir>/modules/gles2/deqp-gles2
[deqp-gles3]
bin=<deqp source dir>/modules/gles3/deqp-gles3
[deqp-gles31]
bin=<deqp source dir>/modules/gles31/deqp-gles31
These platforms can be run using deqp_gles*.py as a suite in piglit. For example:
./piglit run deqp_gles31 my_results -c
It is also possible to mix integrated suites and piglit profiles together:
./piglit run deqp_gles31 quick cl my_results
dEQP profiles generally contain all of the tests from the previous profile, so gles31 covers gles3 and gles2.
Add the following to your piglit.conf file:
[cts]
bin=<cts source dir>/cts/glcts