ophentis / bleno

A node.js module for implementing BLE (Bluetooth low energy) peripherals

bleno

A node.js module for implementing BLE (Bluetooth low energy) peripherals.

Need a BLE central module? See noble.

Note: Mac OS X and Linux are currently the only supported OSes.

Prerequisites

OS X

• install Xcode
• 10.9 or later

Linux (Ubuntu)

• Kernel version 3.6 or above
• libbluetooth-dev

Ubuntu/Debian/Raspbian

sudo apt-get install bluetooth bluez-utils libbluetooth-dev

Intel Edison

See Configure Intel Edison for Bluetooth LE (Smart) Development

Install

npm install bleno

Usage

var bleno = require('bleno');

See examples folder for code examples.

Actions

Start advertising

var name = 'name';
var serviceUuids = ['fffffffffffffffffffffffffffffff0']

bleno.startAdvertising(name, serviceUuids[, callback(error)]);

Note:: there are limits on the name and service UUID's

• name
  • maximum 26 bytes
• service UUID's
  • 1 128-bit service UUID
  • 1 128-bit service UUID + 2 16-bit service UUID's
  • 7 16-bit service UUID

Start advertising iBeacon

var uuid = 'e2c56db5dffb48d2b060d0f5a71096e0';
var major = 0; // 0x0000 - 0xffff
var minor = 0; // 0x0000 - 0xffff
var measuredPower = -59; // -128 - 127

bleno.startAdvertisingIBeacon(uuid, major, minor, measuredPower[, callback(error)]);

Notes::

• OS X:
  • in iBeacon mode your peripheral is non-connectable!

Start advertising with EIR data (Linux only)

var scanData = new Buffer(...); // maximum 31 bytes
var advertisementData = new Buffer(...); // maximum 31 bytes

bleno.startAdvertisingWithEIRData(advertisementData, scanData[, callback(error)]);

• For EIR format section Bluetooth Core Specification sections and 8 and 18 for more information the data format.

Stop advertising

bleno.stopAdvertising([callback]);

Set services

var services = [
   ... // see PrimaryService for data type
];

bleno.setServices(services[, callback(error)]);

Disconnect client

bleno.disconnect(); // Linux only

Update RSSI

bleno.updateRssi([callback(error, rssi)]); // Linux only

Primary Service

var PrimaryService = bleno.PrimaryService;

var primaryService = new PrimaryService({
    uuid: 'fffffffffffffffffffffffffffffff0', // or 'fff0' for 16-bit
    characteristics: [
        // see Characteristic for data type
    ]
});

Characteristic

var Characteristic = bleno.Characteristic;

var characteristic = new Characteristic({
    uuid: 'fffffffffffffffffffffffffffffff1', // or 'fff1' for 16-bit
    properties: [ ... ], // can be a combination of 'read', 'write', 'writeWithoutResponse', 'notify'
    secure: [ ... ], // enable security for properties, can be a combination of 'read', 'write', 'writeWithoutResponse', 'notify'
    value: null, // optional static value, must be of type Buffer
    descriptors: [
        // see Descriptor for data type
    ],
    onReadRequest: null, // optional read request handler, function(offset, callback) { ... }
    onWriteRequest: null, // optional write request handler, function(data, offset, withoutResponse, callback) { ...}
    onSubscribe: null, // optional notify subscribe handler, function(maxValueSize, updateValueCallback) { ...}
    onUnsubscribe: null, // optional notify unsubscribe handler, function() { ...}
    onNotify: null // optional notify sent handler, function() { ...}
});

Result codes

• Characteristic.RESULT_SUCCESS
• Characteristic.RESULT_INVALID_OFFSET
• Characteristic.RESULT_INVALID_ATTRIBUTE_LENGTH
• Characteristic.RESULT_UNLIKELY_ERROR

Read requests

Can specify read request handler via constructor options or by extending Characteristic and overriding onReadRequest.

Parameters to handler are

• offset (0x0000 - 0xffff)
• callback

callback must be called with result and data (of type Buffer) - can be async.

var result = Characteristic.RESULT_SUCCESS;
var data = new Buffer( ... );

callback(result, data);

Write requests

Can specify write request handler via constructor options or by extending Characteristic and overriding onWriteRequest.

Parameters to handler are

• data (Buffer)
• offset (0x0000 - 0xffff)
• withoutResponse (true | false)
• callback.

callback must be called with result code - can be async.

var result = Characteristic.RESULT_SUCCESS;

callback(result);

Notify subscribe

Can specify notify subscribe handler via constructor options or by extending Characteristic and overriding onSubscribe.

Parameters to handler are

• maxValueSize (maximum data size)
• updateValueCallback (callback to call when value has changed)

Notify unsubscribe

Can specify notify unsubscribe handler via constructor options or by extending Characteristic and overriding onUnsubscribe.

Notify value changes

Call the updateValueCallback callback (see Notify subcribe), with an argument of type Buffer

Can specify notify sent handler via constructor options or by extending Characteristic and overriding onNotify.

Descriptor

var Descriptor = bleno.Descriptor;

var descriptor = new Descriptor({
    uuid: '2901',
    value: 'value' // static value, must be of type Buffer or string if set
});

Events

Adapter state change

state = <"unknown" | "resetting" | "unsupported" | "unauthorized" | "poweredOff" | "poweredOn">

bleno.on('stateChange', callback(state));

Advertisement started

bleno.on('advertisingStart', callback(error));

bleno.on('advertisingStartError', callback(error));

Advertisement stopped

bleno.on('advertisingStop', callback);

Services set

bleno.on('servicesSet', callback(error));

bleno.on('servicesSetError', callback(error));

Accept

bleno.on('accept', callback(clientAddress)); // Linux only

Disconnect

bleno.on('disconnect', callback(clientAddress)); // Linux only

RSSI Update

bleno.on('rssiUpdate', callback(rssi)); // Linux only

Running on Linux

Running without root/sudo

Run the following command in the directory you ran npm install from:

find -path '*bleno*Release/hci-ble' -exec sudo setcap cap_net_raw+eip '{}' \;

This grants bleno's hci-ble binary cap_net_raw privileges, so it can start/stop BLE advertising.

Note: The above command requires setcap to be installed, it can be installed using the following:

• apt: sudo apt-get install libcap2-bin
• yum: su -c \'yum install libcap2-bin\'

Multiple Adapters

hci0 is used by default to override set the BLENO_HCI_DEVICE_ID environment variable to the interface number.

Example, specify hci1:

sudo BLENO_HCI_DEVICE_ID=1 node <your file>.js

Set custom device name

By default bleno uses the hostname (require('os').hostname()) as the value for the device name (0x2a00) characterisic, to match the behaviour of OS X.

A custom device name can be specified by setting the BLENO_DEVICE_NAME enviroment variable:

sudo BLENO_DEVICE_NAME="custom device name" node <your file>.js

Roadmap (TODO)

• Mac OS X:

  • Adapter state (unknown | reseting | unsupported | unauthorized | off | on)
  • Advertisement
    • startAdvertising
      • name
      • service UUID's
    • startAdvertisingIBeacon
    • stopAdvertising
  • Services
    • UUID
    • Characteristics
      • UUID
      • properties
        • read (static, dynamic)
        • write
        • write without response
        • notify (subscribe, unsubscribe, value changed)
        • broadcast (not possible)
        • indicate
        • secure (not functioning, OS X issues)
          • read
          • write
      • Descriptors
        • UUID
        • read (static)
        • write (not possible)
    • Included Services (maybe ?)
  • error handling

• Linux

  • Adapter state (unsupported | unauthorized | off | on)
  • Advertisement
    • startAdvertising
      • name
      • service UUID's
    • startAdvertisingIBeacon
    • stopAdvertising
  • Services
    • UUID
    • Characteristics
      • UUID
      • properties
        • read (static, dynamic)
        • write
        • write without response
        • notify (subscribe, unsubscribe, value changed)
        • broadcast (maybe ?)
        • indicate (maybe ?)
        • secure
          • read
          • write
      • Descriptors
        • UUID
        • read (static)
        • write (maybe ?)
    • Included Services (maybe ?)
  • error handling

Useful tools/links

• Tools
  • LightBlue for iOS/OS X
  • nRF Master Control Panel (BLE) for Android
  • hcitool and gatttool by BlueZ for Linux

License

Copyright (C) 2015 Sandeep Mistry [e-mail]

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.