No tool was supplied on command line or found in 'servant' core description
gojimmypi opened this issue · comments
When running fusesoc run --target=ulx3s servant for the for the ULX3S, I see this error:
ERROR: No tool was supplied on command line or found in 'servant' core description
gojimmypi@DESKTOP(WSL): /mnt/c/workspace ()
0 $ mkdir fusesoc-ulx3s
gojimmypi@DESKTOP(WSL): /mnt/c/workspace ()
0 $ cd fusesoc-ulx3s
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
0 $ fusesoc library add serv https://github.com/olofk/serv
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
fusesoc.conf
INFO: Cloning library into fusesoc_libraries/serv
Cloning into 'fusesoc_libraries/serv'...
remote: Enumerating objects: 2277, done.
remote: Counting objects: 100% (518/518), done.
remote: Compressing objects: 100% (281/281), done.
remote: Total 2277 (delta 307), reused 366 (delta 227), pack-reused 1759
Receiving objects: 100% (2277/2277), 5.11 MiB | 4.01 MiB/s, done.
Resolving deltas: 100% (1429/1429), done.
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
0 $ fusesoc library add fusesoc_cores https://github.com/fusesoc/fusesoc-cores
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
fusesoc.conf
INFO: Cloning library into fusesoc_libraries/fusesoc_cores
Cloning into 'fusesoc_libraries/fusesoc_cores'...
remote: Enumerating objects: 670, done.
remote: Counting objects: 100% (221/221), done.
remote: Compressing objects: 100% (154/154), done.
remote: Total 670 (delta 97), reused 175 (delta 55), pack-reused 449
Receiving objects: 100% (670/670), 144.79 KiB | 1.57 MiB/s, done.
Resolving deltas: 100% (241/241), done.
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
0 $ fusesoc run --target=ulx3s servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
ERROR: No tool was supplied on command line or found in 'servant' core description
yet it works fine for the tinyfpga-bx:
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
0 $ fusesoc run --target=tinyfpga_bx servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
INFO: Preparing fusesoc:utils:generators:0.1.7
INFO: Preparing ::serv:1.1.0
INFO: Preparing ::servant:1.1.0
INFO: Generating ::servant-tinyfpga_bx_pll:1.1.0
F_PLLIN: 16.000 MHz (given)
F_PLLOUT: 32.000 MHz (requested)
F_PLLOUT: 32.000 MHz (achieved)
...[snip]...
Info: [ 27230, 27986) |********************+
Info: [ 27986, 28742) |**************+
Info: [ 28742, 29498) |****************************************+
icepack servant_1.1.0_next.asc servant_1.1.0.bin
INFO: Running
The problem seems to be the definitions of boards missing a PCF file type, such as the ulx3s:
ulx3s:
files:
- ulx3s/ulx3s_v20.lpf : {file_type : LPF, copyto : ulx3s_v20.lpf}
- ulx3s/blinky_ulx3s.v : {file_type : verilogSource}
As the zcu102 also fails:
0 $ fusesoc run --target=zcu102 servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
ERROR: No tool was supplied on command line or found in 'servant' core description
... and others also fail:
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
0 $ fusesoc run --target=eclypse_z7 servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
ERROR: No tool was supplied on command line or found in 'servant' core description
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
0 $ fusesoc run --target=fomu-pvt servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
ERROR: No tool was supplied on command line or found in 'servant' core description
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
But note the icebreaker, with a PCF
icebreaker:
files: [icebreaker/pinout.pcf : {file_type : PCF}]
is successful:
0 $ fusesoc run --target=icebreaker servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
INFO: Preparing fusesoc:utils:generators:0.1.7
INFO: Preparing ::serv:1.1.0
INFO: Preparing ::servant:1.1.0
INFO: Generating ::servant-icebreaker_pll:1.1.0
F_PLLIN: 12.000 MHz (given)
F_PLLOUT: 16.000 MHz (requested)
F_PLLOUT: 15.938 MHz (achieved)
I also tried the blinky directories that contained the ulx3s files, but all with the same error:
git clone https://github.com/fusesoc/blinky.git fusesoc-blinky
cd fusesoc-blinky/cd ulx3s
fusesoc run --target=ulx3s servant
fusesoc library add serv https://github.com/olofk/serv
fusesoc library add fusesoc_cores https://github.com/fusesoc/fusesoc-cores
fusesoc run --target=ulx3s servant
cd ..
fusesoc library add fusesoc_cores https://github.com/fusesoc/fusesoc-cores
fusesoc library add serv https://github.com/olofk/serv
fusesoc run --target=ulx3s servant
fusesoc run --target=tinyfpga_bx servant
fusesoc run --target=ulx3s servant
fusesoc run --target=ulx3s
Of course, I'm left wondering about the WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format..
- edit: here's my current
fusesocversion, apparently already up to date at version 1.12.0 per the installation docs:
0 $ fusesoc --version
1.12.0
gojimmypi@DESKTOP(WSL): /mnt/c/workspace/fusesoc-ulx3s ()
0 $ pip3 install --upgrade --user fusesoc
Requirement already up-to-date: fusesoc in /home/gojimmypi/.local/lib/python3.8/site-packages (1.12.0)
Requirement already satisfied, skipping upgrade: edalize>=0.2.3 in /home/gojimmypi/.local/lib/python3.8/site-packages (from fusesoc) (0.2.5)
Requirement already satisfied, skipping upgrade: ipyxact>=0.2.3 in /home/gojimmypi/.local/lib/python3.8/site-packages (from fusesoc) (0.2.4)
Requirement already satisfied, skipping upgrade: pyyaml in /usr/lib/python3/dist-packages (from fusesoc) (5.3.1)
Requirement already satisfied, skipping upgrade: pyparsing in /home/gojimmypi/.local/lib/python3.8/site-packages (from fusesoc) (2.4.7)
Requirement already satisfied, skipping upgrade: simplesat>=0.8.0 in /home/gojimmypi/.local/lib/python3.8/site-packages (from fusesoc) (0.8.2)
Requirement already satisfied, skipping upgrade: Jinja2>=2.11.3 in /home/gojimmypi/.local/lib/python3.8/site-packages (from edalize>=0.2.3->fusesoc) (3.0.1)
Requirement already satisfied, skipping upgrade: attrs>=17.4.0 in /usr/lib/python3/dist-packages (from simplesat>=0.8.0->fusesoc) (19.3.0)
Requirement already satisfied, skipping upgrade: six>=1.10.0 in /usr/lib/python3/dist-packages (from simplesat>=0.8.0->fusesoc) (1.14.0)
Requirement already satisfied, skipping upgrade: okonomiyaki>=0.16.6 in /home/gojimmypi/.local/lib/python3.8/site-packages (from simplesat>=0.8.0->fusesoc) (1.3.0)
Requirement already satisfied, skipping upgrade: MarkupSafe>=2.0 in /home/gojimmypi/.local/lib/python3.8/site-packages (from Jinja2>=2.11.3->edalize>=0.2.3->fusesoc) (2.0.1)
Requirement already satisfied, skipping upgrade: zipfile2>=0.0.12 in /home/gojimmypi/.local/lib/python3.8/site-packages (from okonomiyaki>=0.16.6->simplesat>=0.8.0->fusesoc) (0.0.12)
Requirement already satisfied, skipping upgrade: jsonschema>=2.5.1 in /usr/lib/python3/dist-packages (from okonomiyaki>=0.16.6->simplesat>=0.8.0->fusesoc) (3.2.0)
Greetings @gojimmypi !
Take a look at these lines in servant.core.
Lines 356 to 366 in 28953fe
- You are targeting the fileset through the command.Rewrite the command as
fusesoc run --target=ulx3s_85 servant - Make sure you have "diamond" installed in order to use this target.
Hope it resolves your issue.
Hello @KinzaQamar and thank you for your suggestions!
TL;DR: it works! :)
my servant.core is located in fusesoc_libraries/serv from the above-mentioned project directory initialization.
sure enough, I was only looking at the filesets section. I found the targets you mentioned, and tada! That's Where diamond is found.
I understood the error, but did not realize that's where to edit it.
As a suggestion to @olofk perhaps it would be a good idea to write something to the console:
Using tool from fusesoc_libraries/serv/servant.core: diamond; see section targets:ulx3s_85
I see that trellis is another option defined for the ulx3s_85 but when I try to specify that with --tool=trellis I still get the same error:
0 $ fusesoc run --tool=trellis --target=ulx3s servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
ERROR: Failed to determine work root. Could not resolve target
And so here, the fact that I am still targeting the filesets section, and they keyword ulx3s was found but not in the desired targets section, perhaps a more intuitive error would be good here?
WARNING: Found filesets=ulx3s but did you mean to specify a targets=[value] in your fusesoc_libraries/serv/servant.core?
Further, note that my servant.core contains CAPI=2: at the top, contrary to the CAPI1 warning.
I thought perhaps I could just change my default like this:
ulx3s_85:
default_tool: trellis
description : ULX3S 85k version
filesets : [mem_files, soc, ulx3s]
parameters : [memfile, memsize]
tools:
diamond:
part : LFE5U-85F-6BG381C
trellis:
nextpnr_options : [--package, CABGA381, --85k]
toplevel: servant_ecp5
but I still saw the same error:
0 $ fusesoc run --target=ulx3s servant
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
ERROR: No tool was supplied on command line or found in 'servant' core description
(again, I didn't realize they keyword section problem of filesets vs targets)
Perhaps something as simple as:
Error: keyword ulx3s not defined in targets in ./fusesoc_libraries/serv/servant.core
Anyhow, it WORKS! 👍
Changing the default as shown above, and I am able to build for the ULX3S:
fusesoc run --target=ulx3s_85 servant
Curiously, even when specifying the --target=ulx3s_85 I was not able to specify the --tool=trellis like this:
0 $ fusesoc run --target=ulx3s_85 servant --tool=trellis
WARNING: The CAPI1 core file description format is deprecated and will be removed in the next major version of FuseSoC. Please port your core files to the CAPI2 format.
INFO: Preparing ::serv:1.1.0
INFO: Preparing ::servant:1.1.0
usage: fusesoc run servant_1.1.0 [-h] [--RISCV_FORMAL] [--SERV_CLEAR_RAM] [--memfile MEMFILE] [--memsize MEMSIZE] [--arch ARCH]
[--output_format OUTPUT_FORMAT] [--yosys_as_subtool YOSYS_AS_SUBTOOL] [--makefile_name MAKEFILE_NAME]
[--yosys_template YOSYS_TEMPLATE] [--nextpnr_options NEXTPNR_OPTIONS] [--yosys_synth_options YOSYS_SYNTH_OPTIONS]
fusesoc run servant_1.1.0: error: unrecognized arguments: --tool=trellis
It is apparently order-dependent, as this works:
fusesoc run --tool=trellis --target=ulx3s_85 servant
I undid my changes to the file and sure enough, I was still able to build for the ULX3S!! Woohoo!!
Thanks so much for your help! Cheers.