oh2gxn / cosmac-hacks

Various programs for the 1802 Membership Card

cosmac-hacks

Various programs for the 1802 Membership Card

Due to my interests in both embedded / low-level programming and retro electronics, I started hacking with a modern version of the 70's COSMAC ELF.

Hardware

Currently, I'm running these programs on the 1802 Membership Card (Rev. G) by Lee Hart et al. http://www.retrotechnology.com/memship/memship.html

Programming tips

In lack of better code format, I'm following the conventions at http://www.ittybittycomputers.com/IttyBitty/ShortCor.htm

So, each of the bytes in the object code is represented by one row with the following fields:

• address in hex
• binary code in hex
• label: (optional)
• mnemonic
• operand (when applicable, sometimes represented by the next byte)
• .. comment (the two dots are the comment separator)

Example:

0003 E7 LOOP:   SEX 7  .. register address of a memory address

List of current programs

The test programs from the 1802 Membership Card manual:

• blinkQfast: a test program flipping Q on/off as fast as possible
• blinkQslow: a similar test with a delay loop
• valotin: test for reading input switches and controlling output LEDs

There was no mention about a software licence, but I suppose sharing these simple examples falls into the category of "fair use". Besides, the comments and potential bugs are mine :)

My hack for testing RAM:

• memtest: The amount of RAM can be doubled by installing another 32k RAM chip and using the 16th address bit (and its inverse) for the chip output enable pins. However, the bit-inverting FET in Rev. G might not work reliably with all RAM chips, so there is a need for a test program.

TODO: more programs...

At least the following are planned:

• bytebeat: This would require an 8-bit 8kHz "sound card" =)
• some recent revision of ETOPS?
• some equivalent of PAL Pixie (more HW)?

-Janne, OH2GXN