3D Printed 3 Axis Camera Slider, remote controlled via Bluetooth PS3 Controller
Build Video:https://youtu.be/7TkybpSQULk
This project is based on isaac879's slider. I incorporated the pan & tilt mechanism from him. The brain is a esp32 uC with bluetooth, which is controlled via a generic PS3 Controller. You can set keyframes via square button, and let the slider autonomously circle between the positions. You can also change the speed via L1&R1 to shoot timelapses. total cost for the slider was about ~100€
Libraries used:
-FastAccelStepper
-PS3 Controller Host
don't h8 on me, for the coding, i am a noob :D
3D Printed Parts (in the folder STL): PLA use 30% infill gears, and small parts with 0.2mm Layerheight, everything else with 0.3mm layerheigt
Parts needed:
-3xNema17 Steppers -> https://amzn.to/3dlSE6m
-3xTMC2208 Stepper drivers -> https://amzn.to/3jiBDOd
-1xESP32 uC -> https://amzn.to/2UJMW84
-1xDC-DC Buck Converter for the ESP32
-1x12V LiPo Battery
-3xA3144 Hall Effect Sensors
-3x10k Resistors
-3x100uF Capacitors
-2xF623zz ball bearings
-1xPS3 Controller -> https://amzn.to/3hdXDXW
-wiresset of connectors (JST 2.0 & 2.5 & dupont)
-6mm airsoft balls (for the ballbearing)
-2080 V-SLot Extrusion
-GT2 Belt
-screw set (M3,M4 & M5)
-4xVslot Wheels(22x16x10,2)
Thingiverse: Thingiverse Link: https://www.thingiverse.com/thing:4895308
Paypal Me:
https://paypal.me/clehn8ok?locale.x=de_DE