Giters

nuriel77 / iri-lb-haproxy

IRI HAProxy Loadbalancer

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

iriiotahaproxyconsul-templateiri-playbook

IRI HAProxy Load-balancer

HAPRoxy load balancer for IRI nodes able to support highly available setups using Consul as a configuration backend.

This is a Proof-of-Concept. Most of the work done here has already been added to the IRI playbook dockerized version: https://github.com/nuriel77/iri-playbook/tree/feat/docker

Table of contents

Description

Note: This solution is meant for private IRI nodes cluster.

Using a distributed configuration backend ensures high availability and allows to scale up a cluster seamlessly. This also allows to scale up the number of load balancers to provide fault tolerance -- and load balancing -- of the load balancers themselves (e.g. via DNS round-robin).

This solution is based on Consul and HAproxy, the latter being a robust, feature rich load balancer. In addition to Consul, Consul Template is used to watch services in Consul and update Haproxy.

See Consul's documentation for more information about it: https://www.consul.io/docs/index.html

And Consul-Template: https://github.com/hashicorp/consul-template

How Does it Work

Consul holds a registry of services. The services can be, in our example, IRI nodes. We register the IRI nodes in Consul using its API and add a health check.

We are able to add some meta-tags that are going to help control a configuration per IRI node, for example, whether to check if this node has PoW, whether we should authenticate to it via HTTPS, define timeout, weight, max connections and so on.

Once a service is registered Consul begins to run periodic health checks (defined by our custom script). If the health check is successful or failed will determine if HAProxy keeps it in its pool as a valid node to proxy traffic to.

Consul-template watches for any changes in consul (new/removed services, health check status etc) and updates haproxy's configuration if needed.

Requirements

In order to use this PoC you must have the following installed on your server:

  • Ansible (>=2.4)
  • CentOS (>=7.4) or Ubuntu 18.04

To install Ansible for Ubuntu see: https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html#latest-releases-via-apt-ubuntu

For CentOS simply run sudo yum install ansible -y.

If you don't have Docker installed, you can use the playbook to install it. See the "Installation" chapter below.

Warning

This PoC playbook will install some packages on the system to allow it to operate and configure the services properly. Do not use this installation on a production service!

Installation

There are two ways to get up and running. The best and most complete is via Ansible. The second is building the Consul container yourself and running via the provided docker-compose.yml file. See the Appendix chapter for more information on running via Docker Compose.

To install Ansible see https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html

Clone the repository:

git clone https://github.com/nuriel77/iri-lb-haproxy.git && cd iri-lb-haproxy

Variable files are located in group_vars/all/*.yml. If you want to edit any of those it is recommended to create variable override files, prefixed with z-... . For example: group_vars/all/z-override.yml will be loaded last and override any previously configured variables.

The installation via the playbook is modular: you can choose what to install:

Simple Installation

For a simple installation, run the playbook (will not install docker nor configure firewall, see options below for extra options):

ansible-playbook -i inventory -v site.yml

Install Docker Option

If you want the playbook to install docker for you, add the option -e install_docker=true:

ansible-playbook -i inventory -v site.yml -e install_docker=true

Configure Firewalls Option

If you want the playbook to configure the firewall, add the option -e configure_firewall=true.

ansible-playbook -i inventory -v site.yml -e install_docker=true -e configure_firewall=true

Alternative SSH Port Option

NOTE that to specify an alternative SSH port use the option -e ssh_port=[port number]

Upgrade System Packages Option

In some cases it is required to update all system packages. To let the installation perform the upgrade, run the installer adding the option -e upgrade_all_packages=true to the installation command.

Uninstall

Uninstall is best effort. It will remove all configured files, users, data directories, services, docker containers and images.

ansible-playbook -i inventory site.yml -v --tags=uninstall -e uninstall_playbook=yes

Controlling Consul, Consul-template and Haproxy

The playbook should start Consul and Haproxy for you.

To control a service (stop/restart/reload/stop) use the following syntax, e.g:

systemctl stop consul

consul-template:

systemctl restart consul-template

or haproxy:

systemctl reload haproxy

To view logs use the following syntax:

journalctl -u haproxy -e

You can add the flag -f so the logs are followed live.

HAProxy

HAProxy is configured by default with 2 backends:

  1. Default backend

  2. PoW backend (has a lower maxconn per backend to avoid PoW DoS)

Consul-template uses a haproxy.cfg.tmpl file -- this file is configured on the fly and provided to haproxy.

Commands

Example view stats from admin TCP socket:

echo "show stat" | socat stdio tcp4-connect:127.0.0.1:9999

Alternatively, use a helper script:

show-stat

or

show-stat services

Consul

Consul exposes a simple API to register services and healthchecks. Each registered service includes a healthcheck (a simple script) that concludes whether a service is healthy or not. Based on the service's health the backend becomes active or disabled in HAProxy.

Consul Template listens to consul and processes any changes on key value store, services or their healthchecks. E.g. if a new service is added, consul template will reload HAProxy with the new service (IRI node). If a service's healthcheck is failing, consul template will reload HAproxy, removing the failed service.

Commands

Export the Consul master token to a variable so it can be reused when using curl:

export CONSUL_HTTP_TOKEN=$(cat /etc/consul/consul_master_token)

Example view all registered services on catalog (Consul cluster) level:

curl -s -H "X-Consul-Token: $CONSUL_HTTP_TOKEN" -X GET http://localhost:8500/v1/catalog/services | jq .

Example register a service (IRI node):

curl -H "X-Consul-Token: $CONSUL_HTTP_TOKEN" -X PUT -d@service.json http://localhost:8500/v1/agent/service/register

Example deregister a service (IRI node):

curl -H "X-Consul-Token: $CONSUL_HTTP_TOKEN" -X PUT http://localhost:8500/v1/agent/service/deregister/10.100.0.10:14265

View all health checks on this agent:

curl -s -H "X-Consul-Token: $CONSUL_HTTP_TOKEN" -X GET http://localhost:8500/v1/agent/checks | jq .

View all services on this agent:

curl -s -H "X-Consul-Token: $CONSUL_HTTP_TOKEN" -X GET http://localhost:8500/v1/agent/services | jq .

See Consul's API documentation for more information: https://www.consul.io/api/index.html

Service JSON files

In the directory roles/shared-files you will find some JSON files, which are service and health checks definitions. Those are used to register a new service (IRI node) to consul.

Here is an example with some explanation:

{
  "ID": "10.10.0.110:15265",    <--- This is the ID of the service. Using this ip:port combination we can later delete the service from Consul.
  "Name": "iri",                <--- This is the name of the Consul service. This should be set to 'iri' for all added nodes.
  "tags": [
    "haproxy.maxconn=7",        <--- This tag will ensure that this IRI node is only allowed maximum 7 concurrent connections
    "haproxy.scheme=http",      <--- The authentication scheme to this IRI node is via http
    "haproxy.pow=false"         <--- This node will not allow PoW (attachToTangle disabled)
  ],
  "Address": "10.10.0.110",     <--- The IP address of the node
  "Port": 15265,                <--- The port of IRI on this node
  "EnableTagOverride": false,
  "Check": {
    "id": "10.10.0.110:15265",  <--- Just a check ID
    "name": "API 10.10.0.110:15265", <--- Just a name for the checks
    "args": ["/scripts/node_check.sh", "-a", "http://10.10.0.110:15265", "-i"], <--- This script and options will be run to check the service's health
    "Interval": "30s",          <--- The check will be run every 30 seconds
    "timeout": "5s",            <--- Timeout will occur if the check is not finished within 5 seconds
    "DeregisterCriticalServiceAfter": "1m" <--- If the health is critical, the service will be de-registered from Consul
  }
}

Here is an example of a service (IRI node) that supports PoW:

{
  "ID": "10.10.0.110:15265",     <--- Service unique ID
  "Name": "iri",                 <--- We always use the same service name 'iri' to make sure this gets configured in Haproxy
  "tags": [
    "haproxy.maxconn=7",         <--- Max concurrent connections to this node
    "haproxy.scheme=http",       <--- connection scheme (http is anyway the default)
    "haproxy.pow=true"           <--- PoW enabled node
  ],
  "Address": "10.10.0.110",
  "Port": 15265,
  "EnableTagOverride": false,
  "Check": {
    "id": "10.10.0.110:15265-pow",
    "name": "API 10.10.0.110:15265",
    "args": ["/scripts/node_check.sh", "-a", "http://10.10.0.110:15265", "-i", "-p"], <--- Note the `-p` in the arguments, that means we validate PoW works.
    "Interval": "30s",
    "timeout": "5s",
    "DeregisterCriticalServiceAfter": "1m"
  }
}

A simple service's definition:

{
  "ID": "10.80.0.10:16265",
  "Name": "iri",
  "tags": [],
  "Address": "10.80.0.10",
  "Port": 16265,
  "EnableTagOverride": false,
  "Check": {
    "id": "10.80.0.10:16265",
    "name": "API http://node01.iota.io:16265",
    "args": ["/scripts/node_check.sh", "-a", "http://node01.iota.io:16265", "-i", "-m", "1.4.1.7"], <--- Note that we ensure the API version is minimum 1.4.1.7
    "Interval": "30s",
    "timeout": "5s",
    "DeregisterCriticalServiceAfter": "1m"
  }
}

HTTPS enabled service/node:

{
  "ID": "10.10.10.115:14265",
  "Name": "iri",
  "tags": [
    "haproxy.weight=10",    <--- sets weight for HAPRoxy
    "haproxy.scheme=https", <--- scheme is https
    "haproxy.sslverify=0"   <--- Do not SSl verify the certificate of this node
  ],
  "Address": "10.10.10.115",
  "Port": 14265,
  "EnableTagOverride": false,
  "Check": {
    "id": "10.10.10.115:14265",
    "name": "10.10.10.115:14265",
    "args": ["/usr/local/bin/node_check.sh", "-a", "https://10.10.10.115:14265", "-i", "-k"], <--- `-k` skips verifying SSL when running healthchecks.
    "Interval": "30s",
    "timeout": "5s",
    "DeregisterCriticalServiceAfter": "1m"
  }
}

Status

To view a compact view of HAProxy's current status run:

show-stat

This will result in something like:

# pxname,svname,status,weight,addr
iri_pow_back,irisrv2,MAINT,1,149.210.154.132:14265
iri_back,irisrv2,UP,1,185.10.48.110:15265
iri_back,irisrv3,MAINT,1,201.10.48.110:15265
iri_back,irisrv4,UP,1,80.61.194.94:16265

We see the backend name, service slot name, status (UP or MAINT), the weight, IP address and port.

When a service is in MAINT it means it has been disabled because either health check is failing or explicitly set to maintenance mode.

Appendix

File Locations

Consul's configuration file:

/etc/consul/conf.d/main.json

Bash script that runs the IRI node health checks:

/usr/local/bin/node_check.sh

HAProxy's configuration file:

/etc/haproxy/haproxy.cfg

Consul's systemd control file:

/etc/systemd/system/consul.service

HAproxy's systemd control file:

/etc/systemd/system/haproxy.service

Consul-template systemd file:

/etc/systemd/system/consul-template.service

Consul-template haproxy template

/etc/haproxy/haproxy.cfg.tmpl

Consul template binary:

/opt/consul-template/consul-template

Consul template plugin script

/opt/consul-template/consul-template-plugin.py

Run with Docker Compose

To avoid installing dependencies you can also run the containers using Docker Compose. See the provided docker-compose.yml file.

You will have to build at least the Consul container because it is customized to support some additional dependencies:

Enter the directory roles/consul/files/docker and run:

docker build -t consul:latest .

This will make the Consul image ready.

To run the containers, in the main folder, simply execute:

docker-compose up -d

or

docker-compose stop

NOTE consul-template cannot be run in a container as it requires access to systemctl commands. For now it is best left to run as a binary on the host.

TODO

  • Add more usage examples to the README / write a short blog with usage examples
  • Add a UI to control the load-balancer (manage backends, view stats etc)
  • Test support of certbot script with this installation
  • Test support of HTTPS backends client verification
  • Provide helper script to add/remove/update services (nodes)
  • Prometheus exporter for HAProxy
  • Centralized monitoring for backend nodes

Donations

If you like this project and would like to support it you can donate IOTA to the following address:

JFYIHZQOPCRSLKIYHTWRSIR9RZELTZKHNZFHGWXAPCQIEBNJSZFIWMSBGAPDKZZGFNTAHBLGNPRRQIZHDFNPQPPWGC

About

IRI HAProxy Loadbalancer

iriiotahaproxyconsul-templateiri-playbook

License:MIT License

Languages

Language:Shell 75.6%Language:Python 24.4%