softscheme === Mirror of: http://www.cs.cmu.edu/Groups/AI/lang/scheme/code/ext/types/soft_scm/soft_scm.tgz All code is "as-is". Other links: - CMU index: http://www.cs.cmu.edu/Groups/AI/lang/scheme/code/ext/types/soft_scm/0.html - Andrew Wright's dissertation: http://www.ccis.northeastern.edu/racket/pubs/thesis-wright.ps.gz - 1-file version (benchmark for [Larceny](http://www.larcenists.org/)): https://github.com/skangas/guile/blob/master/gc-benchmarks/larceny/softscheme.sch Original README text below. - - - Soft Scheme Andrew K. Wright This software is Copyright (c) 1993,1994 by Andrew K. Wright. It is *not* public domain. You are free to use this software for educational and experimental purposes only. You must return substantial modifications to the author. No warranties or guarantees of any kind apply to this software. Please address correspondence to: wright@cs.rice.edu. This software requires pattern matching extensions to Scheme available by anonymous FTP from titan.cs.rice.edu in public/wright/match.tar.Z. This software has been tested on Chez Scheme 4.1 and on SCM on a Sparc10. It will probably port easily to other Schemes with SLIB. It does require a fairly high performance Scheme system. See the FAQ on comp.lang.scheme (posted weekly) for information on Chez, SCM, and SLIB. If you do port Soft Scheme to other Scheme systems, please return any changes to me. 1. Documentation This file briefly describes how to install and use the soft type checker. See the pattern matching documentation for match and define-structure, but note the restrictions later in this file. See the tech report accompanying this package for further information. I apologize for the lack of better documentation. This will be fixed eventually. 2. Installation Instructions For Chez Scheme: 1. Obtain the pattern matcher, unpack it, and compile it to "match.so". 2. Change the installation options at the top of "load-chez.ss" to reflect the ABSOLUTE pathnames of the appropriate files. Set the option to #f if that file is not to be loaded (eg. set match-file #f if you have arranged for match to be loaded by some other method like ".schemerc"). 3. Run "scheme Build-chez". This will build a compiled image "st.so". 4. Run "scheme st.so". You're up and typing ... For SCM: 1. Obtain the pattern matcher and unpack it. 2. Change the installation options at the top of "load-slib.scm" to reflect the ABSOLUTE pathnames of the appropriate files. Set the option to #f if that file is not to be loaded (eg. set match-file #f if you have arranged for match to be loaded by some other method like "ScmInit.scm"). 3. Run "scm Build-slib". This will build a source image "st.scm". 4. Run "scm -i -p1 st.scm". You're up and typing ... Note that SCM takes a while to compile this code (~75 seconds to load, ~25 seconds for first use on a Sparc10). 3. Example Try (st: "example.ss"). Use (st:type) to see the types of the various definitions. Try (load "example.ss") without soft type checking at (optimize-level 0) and (optimize-level 3) (in Chez) for comparison. 4. Usage This soft type system defines several commands (listed below), as well as run-time checks for every R4RS primitive. The run-time checks are prefixed with "CHECK-"; for example, the run-time check for map is CHECK-map. There are also a few macros with a similar naming convention. The soft type checker has types for all R4RS primitives, plus a few extensions. You will be warned about unknown references. The type checker cannot guarantee the safety of programs referring to unknown routines. There is a facility (define-primitive) to add other primitives (see "custom-chez.ss"). This soft type checker is a batch system. Given a Scheme program, it produces type information for that program and an annotated program with run-time checks inserted. The command (st: file) type checks a file, writes an annotated version of the program with checks inserted to an output file, prints a summary of the inserted checks, and loads and executes the program if it has no unbound references. A program consists of the usual Scheme definitions and expressions, and may be spread across several files. See the "Restrictions on Source Programs" later in this file. 5. Commands (st: file [output]) "file" is a file name "output" if present is a file name Type checks the program, indicating global definitions that are not polymorphic. This command may also report warnings about unbound references. If "output" is present and not #f, an annotated version of the program is written to that file. If "output" is missing, the annotated version is written to a file name constructed from the input file name with suffix ".soft". (st:summary) is invoked to report the inserted checks. Finally, if there were no unbound references, the output is loaded and executed at (optimize-level 3). (st: '(file ...) output) Like above, but the input may be a list a file names. An output file name is required. (st: expression [output]) "expression" is any Scheme expression or definition Like above, but the input may be a quoted top-level Scheme expression. (st:check input [output]) Like st:, but does not execute the program. (st:run file) "file" is a file name Loads and executes a previously generated soft typed program. (st:summary) Prints a summary of checking information for the current program. For each global definition that requires at least one run-time check, the summary includes a line of the form: (definition-name number-of-checks (# match [# inexhaustive]) (# prim) (# field) (# lambda) (# ap) (# TYPE) (# ERROR) There are six kinds of run-time checks: match checks, primitive checks, field checks, lambda checks, application checks, and TYPE checks. "number-of-checks" is the sum of all four kinds of checks. The most common kind of check is a primitive check. Match checks are further broken down into ordinary and inexhaustive. A match is inexhaustive if the type system cannot precisely represent its possible input. For example, the expression (match x [1 ...]) is inexhaustive because the type system must use the approximate type "number" for its input. An ordinary match check indicates that the type of the input value is larger than the type assigned by the system to the match expression, even if this type is not precise. Hence (match #t [1 ...]) gets an ordinary match check. "field", "lambda", "ap", and "TYPE" indicate the breakdown of other checks. A "TYPE" check is a static type check representing the failure of a static type annotation. Some checks are definite; if reached, such a check cannot succeed. (ERROR #) indicates the number of such checks, if any. Following the summaries for individual definitions is a total line: TOTAL CHECKS number-of-checks (of possible-checks is P %) [(ERROR #)] [(TYPE #)] This line reports the total number of run-time checks required for the entire program, the potential number of checks (how many a naive Scheme compiler inserts), the percentage P of sites that require run-time checks, the total number of definite checks if any, and the total number of static type checks if any. (st:type definition ...) definition ... is one or more global definitions of the current program (symbols). Prints the types of each definition. (st:type) Prints the types of every global definition in the current program. This command can also be used to inspect the types of primitives, eg. (st:type 'force). (st:type N ...) "N" is a CHECK or CLASH number Prints the types of each CHECK or CLASH. See (st:cause). (st:ltype definition ...) definition ... is one or more global definitions of the current program (symbols). Prints the types of all local definitions within each global definition. (st:ltype) Prints the types of every local definition in the entire program. (st:cause) Prints cause information for CHECKs. This command is intended to help locate why a run-time CHECK is inserted. For each inserted CHECK, (st:cause) prints a list of cause items. There are two kinds of cause items: 1. A cause item may be a set of identifiers, like (even? odd?). This item indicates that even? and odd? are mutually recursive and are type checked (generalized) together. Independent of their uses, the definitions of these procedures force the check. Command (st:type N) where N is the CHECK identifier number will print the type of the checked primitive. This type is determined only from the definitions of even? and odd?, and will include some elements that the unchecked primitive does not accept. 2. A cause item may be a CLASH number. A CLASH is a use of a polymorphic non-primitive procedure that forces a CHECK to be inserted. Again, (st:type N) where N is the clash number will display the type of the clash. If a check has several causes, each of these causes may need to be repaired to eliminate the check. To better understand (st:cause), try it with the example referred to at end of this document. (st:typemode) Toggles the type display mode between Pretty [the default] and Raw. (st:verbose) Toggles verbosity on/off. Verbose mode prints definition names as they are type checked. (st:help) Prints a brief summary of the commands. 6. The Annotated Program The annotated program includes run-time checks to guarantee safe program execution. This annotated program can be run at (optimize-level 3) with no possibility of a memory violation if there were no unbound references. Every run-time check has a unique identification number. This number is reported in the error message when a run-time check fails. By searching for this number in the annotated program, it is easy to determine exactly which run-time check failed. The six kinds of run-time checks are: (CHECK-match (# [INEXHAUST]) exp clauses ...) (CHECK-primitive # [ERROR]) ; where primitive is +, -, car, ... (CHECK-ap (# [ERROR]) fun args ...) (CHECK-lambda (# [ERROR]) names body ...) (CHECK-field (#) name exp) (CHECK-: (#) type exp) In each case, # is the identification number of the check. A primitive check like CHECK-car is inserted if the arguments of the primitive may not be the right type, or if the wrong number of arguments is present. CHECK-match is inserted for a match check. CHECK-ap is inserted when the function expression may not be a procedure. CHECK-lambda is generated for lambda expressions that may be called with the wrong number of arguments. CHECK-field is generated for field operations whose record argument may not possess the required field. Finally, CHECK-: is inserted for a failed type annotation. CHECK-: is guaranteed to blow up if reached. 7. Restrictions on Source Programs Names of the form CHECK-... and st:... should be avoided. The single argument forms of make-vector and make-list cannot be used as they have no sensible type. Not all forms of match patterns are handled. The following patterns cannot be used: ..., ..k, not, or, get!, set!, quasi-patterns, and ? predicates where the predicate expression is not a primitive or a predicate built by define-structure. Define-structure with initial values is not handled. Extend-syntax and defmacro definitions are loaded (by eval) into Scheme and subsequently expanded. Forget datatype, it does not work yet. 8. Caveats Code that relies on the order of evaluation of letrec expressions, or that does not order top-level definitions properly (in left-to-right order), may blow up. I regard this as problem with Scheme, not soft typing.