右家智能家居组件(莱特 LaiteCN组件控制) For Home Assistant

Author: Vincent Qiu nov30th[AT)gmail.com

Features

Manages connections to Laite(莱特) Device automatically, the interfaces for each component are packed friendly.
Easily by using Send and Recv events with this component to Laite devices.

Full Configuration

configuration.yaml Example

youjia:
  - platform: host
    name: main
    host: 192.168.1.200
    port: 4196
    device_id: 1811102E
    contorl_delay: 0.3
  - platform: switch
    entity_id: '1ACA1008B4'
    name: 'Testing X160'
    device_name: 'Testing X160'
    host_name: main
    auto: true
    names:
      0: "演示"
      1: "客厅"
      2: "厨房"
      3: "123"
      4: '123'
      5: '3333'
      100: "1-9按钮"
      101: "10-18按钮"
      102: "全部按钮"

  - platform: switch
    entity_id: '1ACA1008B4'
    name: 'Testing X160'
    device_name: 'Testing X160'
    host_name: main
    auto: false
    names:
      9: "同样的继电器其他按钮"

host should be the first in platforms, put all the host sections before any other platforms under youjia.

Other platforms under youjia must have the host_name value which points to the one host above.

E.g. If you have two Laite network host and switch A is connected to Laite network host B, the switch A must be put host_name as Laite network host B's name. The value in this example is "main".

Value required

- platform: host (Required)

name: main (Required, used for other youjia platform communication)
host: 192.168.1.200 (Required, Laite host IP address)
port: 4196 (Required, Laite host port)
device_id: 1811102E (Required, Laite device ID, 8 chars)
contorl_delay: 0.3 (Required, interval between all commands to this host, unit: second)

X160 Swtich Configuration

X160 has 18 roads control, also including 1-9 roads all on/off and 10-18 roads all on/off control. Configuration can be multiple sections with one switch, please notice that if you have two same X160 devices, set the auto as true on one device only.

- platform: switch (Required)

entity_id: '1ACA1008B4' (Required, Laite switch device ID)
name: 'Testing X160' (Required, given name by you)
device_name: 'Testing X160' (Required, given name by you)
host_name: main (Required, the field should be same as one host name in your configuration)
auto: true (Required, if true, a thread will be created to fetch the switch button status each 20 secs)
names: (Required)

0: "演示"
1: "客厅"
2: "厨房"
3: "123"
4: '123'
5: '3333'
100: "1-9按钮" (Optional, ID 100 will control the 1-9 roads on switch)
101: "10-18按钮" (Optional, ID 101 will control the 10-18 roads on switch)
102: "全部按钮" (Optional, ID 100 will control the all roads on switch)

Latest Updated: 20190707

nov30th / YouJia