Some basic example applications on the STM32F4 series. Tested in 32F429IDISCOVERY.
- TP1 - INPUT/OUTPUT ----------------------
- When we push the Blue Button of the STM29F429I_Discovery, interfaced with the pin PA0 the green LED (pin LD3) has to be ON, and the red one (LD4) has to be toggeled.
- WHen we release the Blue Button (PA0) we turn Off the 2 LEDs.
Use: STM32CubeMX and ARM Keil v5
- TP2 - UART Communication ------------------
-
Exchange a char table, whose size is defined by SIZE (5) bitween UART5 and USART1. the UART pins are interfaced in the STM29F429I_Discovery like that:
-
PC12 ------> UART5_TX AND PD2 ------> UART5_RX
-
PA9 ------> USART1_TX AND PA10 ------> USART1_RX
-
Use: STM32CubeMX and ARM Keil v5
- TP3 - SPI Communication & library creation
- Familiarising with SPI-based communication and common components datasheet study.
- Designing a library that can manage the SPI communication and data Read/Write to the gyroscope internal registers.
- The library should simplify at maximum the managment of the gyroscope.