nospam2000

ch341-baudrate-calculation

How to calculate the baud rate of a CH341/CH340 usb serial adapter with a very small error rate

urh-ETH_Comfort_decode_plugin

Universal Radio Hacker (urh) plugin to decode eQ-3/ELV/Technoline ETH Comfort/SDLC/HDLC messages

afterburner

GAL chip programmer for Arduino

Greaseweazle-F7-Plus

My board design for Keir Fraser's Greaseweazle

xilinx-ise-docker-mac

Run Xilinx ISE on a Mac using docker

sensors-software

sourcecode for reading sensor data

romdisk

Boot an Amiga from a disk image embedded into the ext. ROM

RASCSI

English version of the Raspberry Pi SCSI interface board "RaSCSI". This allows a Raspberry Pi to function as an emulated hard disk and/or CD-ROM for vintage Macintosh computers.

EnterSmartCardPin

emulate entering a smartcard pin on a keyboard. The PIN is stored transiently for some hours on a ATmega32U4

BIGTREETECH-TouchScreenFirmware

support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1

Bluster

CPLD Replacement for A2000 Buster

broadlink-remotemaster

Send IR commands via Broadlink RM3 / RM4 from RemoteMaster / IrScrutinizerdefin code definitions (.girr format)

edge

Run .NET and Node.js code in-process on Windows, MacOS, and Linux

EsptouchForAndroid

EspTouch is one way for Android Phone to tell the connected Router's Ssid, Password and etc. to make IOT devices to connect to the same Router. EspTouch is developed and maintained by Espressif Corp.

fx3fun

Charles's playground for the Cypress FX3

fx3lafw

Blob-free logic analyzer firmware for FX3

galparse

GAL parsing

gos7

Implementation of Siemens S7 protocol in golang

libsigrok

My work on libsigrok

Marlin

Optimized firmware for RepRap 3D printers based on the Arduino platform.

mstflint380

mstflint version 3.8.0 + some patches to compile on debian bookworm and trixie. Needed to update the firmware of Mellanox ConnectX-2 infiniband cards.

node-opcua

an implementation of a OPC UA stack fully written in javascript and nodejs - http://node-opcua.github.io/

node-red-contrib-opcua

A Node-RED node to communicate OPC UA. Uses node-opcua library.

node-red-contrib-rclient

client for Rserve to use the R-environment from Node-Red

packet

Incremental binary parsers and serializers for Node.js.

PCB-Projects

scancode.io

ScanCode.io is a server to script and automate software composition analysis pipelines with ScanPipe pipelines. First application is for Docker container and VM composition analysis.

Sonoff-Tasmota

Sonoff-Tasmota-Shutters

Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options

ttfirmware