esp-idf-can2http

CANbus to http bridge using esp32.
It's purpose is to be a bridge between a CAN-Bus and a HTTP-Server.

Software requirement

ESP-IDF V4.4/V5.x.
ESP-IDF V5.1 is required when using ESP32C6.

Hardware requirements

SN65HVD23x CAN-BUS Transceiver
SN65HVD23x series has 230/231/232.
They differ in standby/sleep mode functionality.
Other features are the same.
Termination resistance
I used 150 ohms.

Wireing

SN65HVD23x		ESP32	ESP32-S2/S3	ESP32-C3/C6
D(CTX)	--	GPIO21	GPIO17	GPIO0	(*1)
GND	--	GND	GND	GND
Vcc	--	3.3V	3.3V	3.3V
R(CRX)	--	GPIO22	GPIO18	GPIO1	(*1)
Vref	--	N/C	N/C	N/C
CANL	--				To CAN Bus
CANH	--				To CAN Bus
RS	--	GND	GND	GND	(*2)

(*1) You can change using menuconfig. But it may not work with other GPIOs.

(*2) N/C for SN65HVD232

Test Circuit

   +-----------+   +-----------+   +-----------+ 
   | Atmega328 |   | Atmega328 |   |   ESP32   | 
   |           |   |           |   |           | 
   | Transmit  |   | Receive   |   | 21    22  | 
   +-----------+   +-----------+   +-----------+ 
     |       |      |        |       |       |   
   +-----------+   +-----------+     |       |   
   |           |   |           |     |       |   
   |  MCP2515  |   |  MCP2515  |     |       |   
   |           |   |           |     |       |   
   +-----------+   +-----------+     |       |   
     |      |        |      |        |       |   
   +-----------+   +-----------+   +-----------+ 
   |           |   |           |   | D       R | 
   |  MCP2551  |   |  MCP2551  |   |   VP230   | 
   | H      L  |   | H      L  |   | H       L | 
   +-----------+   +-----------+   +-----------+ 
     |       |       |       |       |       |   
     +--^^^--+       |       |       +--^^^--+
     |   R1  |       |       |       |   R2  |   
 |---+-------|-------+-------|-------+-------|---| BackBorn H
             |               |               |
             |               |               |
             |               |               |
 |-----------+---------------+---------------+---| BackBorn L

      +--^^^--+:Terminaror register
      R1:120 ohms
      R2:150 ohms(Not working at 120 ohms)

NOTE
3V CAN Trasnceviers like VP230 are fully interoperable with 5V CAN trasnceviers like MCP2551.
Check here.

Installation

git clone https://github.com/nopnop2002/esp-idf-can2http
cd esp-idf-can2http
idf.py set-target {esp32/esp32s2/esp32s3/esp32c3/esp32c6}
idf.py menuconfig
idf.py flash

Configuration

CAN Setting

WiFi Setting

You can use static IP.

You can connect using mDNS.

External HTTP Server Setting

The External HTTP Server receives CAN Bus received data.

Note
The Built-in HTTP Server receives CAN Bus transmittion data.

Definition from CANbus to HTTP

When CANbus data is received, it is sent by HTTP POST according to csv/can2http.csv.
The file can2http.csv has three columns.
In the first column you need to specify the CAN Frame type.
The CAN frame type is either S(Standard frame) or E(Extended frame).
In the second column you have to specify the CAN-ID as a hexdecimal number.
In the last column you have to specify the HTTP-POST-Path of external HTTP server.
Each CAN-ID is allowed to appear only once in the whole file.

S,101,/post
E,101,/post
S,103,/post
E,103,/post

When a CAN frame with ID 0x101 is received, POST with the 'canid':257.
When a CAN frame with ID 0x103 is received, POST with the 'canid':259.

POST Parameter Example:
CAN-ID is a decimal number, not a hexadecimal number.

{"canid":257, "frame": "standard", "data": [16, 17, 18]}
{"canid":257, "frame": "extended", "data": [16, 17, 18]}
{"canid":259, "frame": "standard", "data": [16, 17, 18]}
{"canid":259, "frame": "extended", "data": [16, 17, 18]}

CAN messages not registered in csv/can2http.csv are discarded and not POSTed to HTTP.

Definition from HTTP to CANbus

Not exist.
You can send any CAN-ID.

Send CANBus frame using curl

CAN-ID is specified in decimal number.

$ curl -X POST -H "Content-Type: application/json" -d '{"canid": 513, "frame": "standard", "data": [16, 17, 18]}' http://esp32-server.local:8000/api/twai/send
twai send successfully

$ curl -X POST -H "Content-Type: application/json" -d '{"canid": 513, "frame": "extended", "data": [16, 17, 18]}' http://esp32-server.local:8000/api/twai/send
twai send successfully

CANBus reception using UNO.

HTTP Server Using Tornado

cd $HOME
sudo apt install python3-pip python3-setuptools
python3 -m pip install -U pip
python3 -m pip install -U wheel
python3 -m pip install tornado
git clone https://github.com/nopnop2002/esp-idf-can2http
cd esp-idf-can2http
cd tornado
python3 can.py

You can specify the number of lines to display and the port number.
The default port number is 8000 and the default number of display lines is 20.
Redisplay every 5 seconds.

HTTP Server Using Flask

cd $HOME
sudo apt install python3-pip python3-setuptools
python3 -m pip install -U pip
python3 -m pip install -U wheel
python3 -m pip install -U Werkzeug
python3 -m pip install flask
git clone https://github.com/nopnop2002/esp-idf-can2http
cd esp-idf-can2http
cd flask
python3 can.py

You can specify the number of lines to display and the port number.
The default port number is 8000 and the default number of display lines is 20.
Redisplay every 5 seconds.