These are a collection of container images that provide standardized environments for Python and R with Jupyter Lab, RStudio and VS Code IDEs. The images are built off the Rocker, Pangeo and Jupyter base images. This repo holds the stable Docker stack for specific pipelines used in Fisheries. The images are designed to work out-of-box and identically in Jupyter Hubs, Codespaces, Binder, etc.Read the Design section below on what the NMFS Open Sci Docker Stack does. For use, see Instructions and Link to files. This Docker Stack was the joint of a number of people. See Acknowledgements.
There are many other images in the images
folder that are experimental
in nature. If you are looking for standard Python or R Docker images,
go to the base Docker stacks linked above.
Image | Description | Open | info |
---|---|---|---|
Base | Use as the base image when possible | ||
py-rocket-base |
Tidyverse based R image with Python ghcr.io/nmfs-opensci/container-images/py-rocket-base:latest |
dockerfile directory |
|
py-rocket-geospatial |
Geospatial Python and Geospatial R image ghcr.io/nmfs-opensci/container-images/py-rocket-geospatial:latest |
dockerfile directory |
|
Specialized | Images for specific analyses | ||
py-geospatial |
NASA Openscapes Python image used in workshops ghcr.io/nmfs-opensci/container-images/py-geospatial:latest |
dockerfile directory |
|
r-geospatial-sdm |
Geospatial R (vrs 4.4) image with Species Dist Modeling packages including sdmTMB ghcr.io/nmfs-opensci/container-images/r-geospatial-sdm:latest |
dockerfile directory |
|
arcgis |
ArcGIS Python module image that will run in a JupyterHub ghcr.io/nmfs-opensci/container-images/arcgis:latest |
dockerfile directory |
|
coastwatch |
CoastWatch image for satellite training courses ghcr.io/nmfs-opensci/container-images/coastwatch:latest |
dockerfile directory |
|
echopype |
echopype tooling for ocean sonar data processing in Python. Author: Wu-Jung Lee + echopype team. ghcr.io/nmfs-opensci/container-images/echopype:latest |
dockerfile directory |
|
vast |
VAST with R 4.3.3 ghcr.io/nmfs-opensci/container-images/vast:latest |
dockerfile directory |
|
aomlomics-jh |
Tourmaline is an amplicon sequence processing workflow for Illumina sequence data that uses QIIME 2 and the software packages it wraps. ghcr.io/nmfs-opensci/container-images/aomlomics-jh:latest |
dockerfile directory |
Click on the image name in the table above for a current list of installed packages and versions
The images are designed to be deployable “out of the box” from JupyterHubs, Codespaces, GitPod, Colab, Binder, and on your computer via Docker or Podman with no modification. See instructions below. Each will spin up Jupyter Lab with Jupyter Lab (and Notebook), RStudio and VS Code with the specific development environment.
- Python environment follows Pangeo images with micromamba installed as the solver and base and notebook environments. The Jupyter modules are installed in notebook conda environment and images will launch with the notebook environment activated, again following Pangeo design structure. Images that use Pangeo as base will have user jovyan and user home directory home/jovyan.
- When an image contains both R and Python, the base image is a rocker
image and adheres to the rocker norms for R and RStudio environment
design. For the Python side of these images, micromamba is installed
and the Pangeo conda environment structure is applied as in the Python
only images. RStudio will use the Python environment in the conda
notebook environment when Python is used from within RStudio. The user
is
rstudio
but the home directory ishome/jovyan
so images play nice with standard JupyterHub deployments with persistent memory. - These images are not terribly light-weight (they are large). Use the original Jupyter, Pangeo or Rocker images if you are looking for lightweight data science images.
The main reason is that geospatial, bioinformatics, and TMB/INLA environments can be hard to get working right. Using a Docker image means you use a stable environment. Watch this video from Yuvi Panda (Jupyter Project) video and read about the Rocker Project in the R Project Journal article by Carl Boettiger and Dirk Eddelbuettel.
Related Docker Stacks
- NASA Openscapes corn and NASA Openscapes py-rocket
- Rocker
- Pangeo
- Jupyter
- geocompx
- GPU accelerated docker images and devcontainers
- ml tooling
The motivation of the Docker Stack was the success of the NASA Openscapes “corn” image developed by Luis Lopez (NASA) and used in countless workshops on cloud-computing with NASA Earth Data. Subsequently the NASA Openscapes mentor cloud-infrastructure Slack group met during weekly co-work sessions and plugged away at the problem of helping users ‘fledge’ off the Openscapes JupyterHub, which involved creating images that could be used outside of JupyterHubs, and updating the original “py-rocket” R image created by Luis. Carl Boettiger (UC Berkeley & Rocker Project) and Eli Holmes (NOAA Fisheries) took on different aspects of this work. The GitHub Action tooling is curtesy of Carl. “py-rocket-base” is derived from Carl’s “version 2.conda” of py-rocket. Eli further developed py-rocket into the form in this repo to bring it closer to the “corn” and Pangeo designs. Yuvi Panda (Jupyter, 2i2c) was instrumental in helping sort through so many mystery bugs. The Codespaces and devcontainer code is based on Michael Akridge’s Open Science Codespaces work. Individual images have different core developers: Tim Haverland (arcgis), Sunny Hospital (coastwatch), Luke Thompson (aomlomics-jh), Eli Holmes (the various py-rocket versions).
All code used in the images is under open licenses. Some is copy-left which means if you modify their code (we don’t), you need to also provide your source code. The Dockerfile code is released under Apache 2.0, a very permissive open source license which does not require that you make you own modifications open. See the README.md files for the licenses for specific code used in the Docker files.
- The Dockerfiles are released under Apache 2.0.
- jupyterhub : Modified BSD License
- juptyerlab: Open license
- Openscapes base Python image: MIT
- Pangeo Docker Stack: MIT
- Python: Zero clause BSD
- Openscapes base rocker image: MIT
- Rocker Docker Stack: GPL-2
- R: GPL-2, GPL-3
- RStudio Server: GPL-3
- conda and mamba solvers: are open source projects with 3-clause BSD license. Anaconda is not used in these images nor are the Anaconda repositories.
This repository is a scientific product and is not official communication of the National Oceanic and Atmospheric Administration, or the United States Department of Commerce. All NOAA GitHub project content is provided on an ‘as is’ basis and the user assumes responsibility for its use. Any claims against the Department of Commerce or Department of Commerce bureaus stemming from the use of this GitHub project will be governed by all applicable Federal law. Any reference to specific commercial products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply their endorsement, recommendation or favoring by the Department of Commerce. The Department of Commerce seal and logo, or the seal and logo of a DOC bureau, shall not be used in any manner to imply endorsement of any commercial product or activity by DOC or the United States Government.
There are many ways to use Docker images. Here are common ones. Scroll to the bottom for instructions on linking your container to file systems (so you can get and store files).
If your JupyterHub has this option:
- Click on the ‘Bring your own image’ radio button at bottom
- Paste in url to your image (or any other image)
- You will find the urls in the right nav bar under ‘Packages’
- Example
ghcr.io/nmfs-opensci/jupyter-base-notebook:latest
Should work out of the box. Put the url to the image whereever you would use images.
You can run the images on a Virtual Machine or your computer if you have Docker or Podman installed.
docker run -p 8888:8888 ghcr.io/nmfs-opensci/container-images/py-rocket-base:latest
On a Mac M2+ with Rosetta emulation turned on in the Docker Desktop settings.
docker run --platform linux/amd64 -p 8888:8888 ghcr.io/nmfs-opensci/container-images/py-rocket-base:latest
In the terminal look for something like and put that in a browser.
http://127.0.0.1:8888/lab?token=6d45c7d88aba92a815647c
Running geospatial R Docker images and working with netCDF files
GDAL netCDF driver needs some extra flags added to the docker run
for
GDAL to work correctly when run inside a Docker container. This doesn’t
affect Python as much since xarray
works with netCDF via different
drivers, but the terra
netCDF functions use GDAL drivers under the
hood to open netCDF files. You’ll get error saying it can’t find files.
We ran into trouble when accessing cloud-hosted netCDF files. Perhaps it
works ok if you download the files.
Add this to the call:
--cap-add SYS_PTRACE --security-opt seccomp=unconfined
so you call will look like:
docker run -p 8888:8888 --cap-add SYS_PTRACE --security-opt seccomp=unconfined ghcr.io/nmfs-opensci/container-images/py-rocket-geospatial:latest
Note we had trouble getting this to work on an Mac with Apple chips. You
can test if it is going to work by running this Python code and seeing
if you can see if
DCAP_VIRTUALIO` is listed:
from osgeo import gdal
nc = gdal.GetDriverByName("netCDF")
nc.GetMetadata().keys()
Create a file called Dockerfile
and put in the base of your GitHub
repository or in a folder called binder
or .binder
. Into that file
put the following line (replacing the image url to match your desired
image).
FROM ghcr.io/nmfs-opensci/container-images/py-rocket-geospatial:latest
Then go to https://mybinder.org and paste in the url to your GitHub repo or alternatively go to the following url directly:
https://mybinder.org/v2/gh/<username or org>/<reponame>
See the folders in the .devcontainer
folder and create a
.devcontainer/devcontainer.json
file in your own repo by copying one
of devcontainer.json
file. They all use the same template with just
the top lines changed. Note that the folder .devcontainer/codespace
is
also required. If you change the line that starts up Jupyter Lab (at the
bottom of the devcontainer.json file, do not use port 8888 or else
RStudio will not launch.
The Codespaces code is based on: https://github.com/MichaelAkridge-NOAA/Open-Science-Codespaces
Easily use any of the container images, using docker, on google cloud via their free cloud shell/IDE
Work in progress. Approach is similar to Codespaces.
TBD. This seems harder. See this issue
The container gives you a computing environment, but by design, it is a container and not connected to the file system in whatever is running the container. So you will need to get your files in/out of the container and have a way to save your work.
Under the Files menu in Jupyter Lab or the Files tab in RStudio, you can upload and download files.
Jupyter Lab and RStudio have Git GUIs. Use those or the command line to clone repos and push changes back to the repos.
cd ~
git clone <url to the repo>
If you are working with large data sets, you do not want to move these into your container (slow, slow). You will want to create a bucket (like an S3 bucket) and connect to that. This is like having a external drive in the cloud.
Instructions to come.
You can mount a local file system and read/write directly from that. Here “local” means the machine that is running the container. “local” might be a virtual machine, a server or your computer.
On a JupyterHub: The managers of the hub most likely have created persistent memory for you. If not, use Git, upload/download, or use buckets.
On your computer: you’ll add a flag to the docker run
command to
mount your local file system to the Docker container.
When you use --volume
to bind-mount a file or directory, make sure it
does not exist on the Docker container. So do not bind a directory like
\usr
which would destroy the container (nothing bad; it just won’t
work). Use something like \home\jovyan\mydir
. --volume
creates the
endpoint for you and it is always created as a directory.
In this example, mydir
needs to exist in the directory where you are
running docker run
. If you get errors, try ls
to make sure the
directory is there.
docker run --platform linux/amd64 -p 8888:8888 --volume ./myproject_files:/home/jovyan/mydir ghcr.io/nmfs-opensci/container-images/py-rocket-base:latest
as you work in mydir
in the container, those changes will appear in
your computer’s myproject_files
directory. It is as if you are working
on your own computer, but you are using the development environment of
the docker file.
Mac users with Apple chips, add --platform linux/amd64
:
docker run --platform linux/amd64 -p 8888:8888 --volume ./myproject_files:/home/jovyan/mydir ghcr.io/nmfs-opensci/container-images/py-rocket-base:latest