nicholas-gates / iot_temp_humidity

Publish temperature and humidity via Heltec ESP32 to Arduino Cloud

Project: {Project}

Describe your project

Step 1: Installation

Please describe the steps to install this project.

For example:

1. Open this file

2. Edit as you like

3. Release to the World!

Step 2: Assemble the circuit

Assemble the circuit following the diagram layout.png attached to the sketch

Step 3: Load the code

Upload the code contained in this sketch on to your board

Folder structure

 sketch123                => Arduino sketch folder
  ├── sketch123.ino       => main Arduino file
  ├── schematics.png      => (optional) an image of the required schematics
  ├── layout.png          => (optional) an image of the layout
  └── ReadMe.adoc         => this file

License

This project is released under a Public Domain License.

Contributing

To contribute to this project please contact:

BOM

Add the bill of the materials you need for this project.

ID	Part name	Part number	Quantity
R1	10k Resistor	1234-abcd	10
L1	Red LED	2345-asdf	5
A1	Arduino Zero	ABX00066	1

Help

This document is written in the AsciiDoc format, a markup language to describe documents. If you need help you can search the AsciiDoc homepage or consult the AsciiDoc cheatsheet