Diese Firmware ist Teil des Workshops 3d-Drucker-Bau.
Das gibt es zum Runterladen:
Sketch uses 157752 bytes (62%) of program storage space. Maximum is 253952 bytes.
Global variables use 4827 bytes (58%) of dynamic memory, leaving 3365 bytes for local variables. Maximum is 8192 bytes.
In file included from sketch/MarlinConfig.h:30:0,
from sketch/G26_Mesh_Validation_Tool.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/I2CPositionEncoder.cpp:31:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/M100_Free_Mem_Chk.cpp:49:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/MarlinSerial.cpp:36:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/Marlin_main.cpp:252:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Max7219_Debug_LEDs.cpp:38:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Sd2Card.cpp:29:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/SdBaseFile.cpp:30:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/SdFatUtil.cpp:29:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/SdFile.cpp:29:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/SdVolume.cpp:29:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/blinkm.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/cardreader.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/configuration_store.h:26,
from sketch/configuration_store.cpp:47:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/dac_mcp4728.cpp:33:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/digipot_mcp4018.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/digipot_mcp4451.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/emergency_parser.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/endstops.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/fwretract.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/hex_print_routines.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/least_squares_fit.cpp:35:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/leds.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/malyanlcd.cpp:44:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/mesh_bed_leveling.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/neopixel.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/nozzle.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/enum.h:26,
from sketch/parser.h:32,
from sketch/parser.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/pca9632.cpp:28:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/enum.h:26,
from sketch/planner.h:36,
from sketch/planner.cpp:65:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/planner_bezier.cpp:30:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/power.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/power_loss_recovery.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/printcounter.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/runout.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/serial.h:26,
from sketch/serial.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/servo.cpp:53:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/stepper.cpp:80:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/stepper_dac.cpp:44:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/stepper_indirection.h:47,
from sketch/stepper_indirection.cpp:34:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/stopwatch.cpp:25:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/temperature.cpp:27:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/tmc_util.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/twibus.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/ubl.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/ubl_G29.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/ubl_motion.cpp:22:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/ultralcd.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/utility.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/vector_3.cpp:42:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
In file included from sketch/MarlinConfig.h:30:0,
from sketch/Marlin.h:35,
from sketch/watchdog.cpp:23:
sketch/Configuration.h:976:0: warning: "MIN_PROBE_EDGE" redefined
#define MIN_PROBE_EDGE 30
^
sketch/Configuration.h:729:0: note: this is the location of the previous definition
#define MIN_PROBE_EDGE 50
^
Sketch uses 157752 bytes (62%) of program storage space. Maximum is 253952 bytes.
Global variables use 4827 bytes (58%) of dynamic memory, leaving 3365 bytes for local variables. Maximum is 8192 bytes.
Marlin 3D Printer Firmware
Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] Based on Sprinter and grbl. Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.