KAP9
A remix of FMDA and CtrlPew's Tec9/GB-10 printable frame to accomodate the Kimel AP-9 recievers and drop-in trigger group.
by nguyenkvvn original files by Freemendontask and CtrlPew
Description
This remix contains a partially-complete assembly (reference only) of the Kimel AP-9 trigger group, and a frame compatible with the Kimel AP-9 parts kit. This model requires no modifications required to any of the parts in the kit, in contrast to the Tec-9 frame.
Included magazine catch geometry belongs to the original Tec9 release package by Freemendontask and CtrlPew.
Materials Required
You will need a set of each below for each [x] you make.
- x1 Parts Kit - Procure a parts kit of your preference.
- x1 Steel Spring - this is for retaining the magazine release button
- x1 Glock Magazine Release Button - This part is to retain the magazine. You may use a printed button if you wish.
Instructions
Please see the attached rich-text PDF documentation for assembly instructions.
Material: PLA (others materials will work)
- Print Temp: 235 C (for PLA)
- Bed Temp: 60 C (for PLA)
- Bed Prep: Wipe clean, apply a layer of Elmer's glue stick. Kapton tape is optional
- Infill: 99%
- Walls: 4 for 0.4mm nozzles, and 3 for 1.0mm nozzles
- Rectilinear Fill
- Print Enclosure: Not required for PLA.
- Supports: Any- Trees STRONGLY recommended for 1.0mm nozzles for easy removal
Change Log
-
v1.0: Public Release Candidate 1
- Adjusted takedown pin placement by moving it 1mm at 45 degrees towards the front of the frame
-
v0.2: Private Beta Candidate 2
- Adjusted takedown pin placement by moving it 1mm at 45 degrees towards the front of the frame
-
v0.1: Private Beta Candidate 1
- Initial commit
- Made changes to the frame to support the AP9, such as reciever placement, trigger group definition, reciever retention hole, and magazine placement.
License
No license has been selected as of 7/29/2021.