PCB GERBERs, BOM, Verilog and Quartus assignments files.
Compatibility list: https://wiki.neogeodev.org/index.php?title=Fusion_converter
Wire the "RESET" pads on both boards together with a small wire. JTAG connections: see JTAG.png.
The board MUST be powered externally during programming, the programming cable doesn't provide power.
- You were dumb enough to clone an open-hardware project. You could just have used these files.
- You're not respecting the license.
- If you cloned a device without paying attention to its open-source nature, that means you would also clone closed-source devices without caring.
From all the people who create things and share them for free: Fuck you.