Hermione is a utility for integration testing of web pages using WebdriverIO v4 and Mocha.
- Why you should choose hermione
- Prerequisites
- Hooks
- Skip
- Only
- WebdriverIO extensions
- Quick start
- .hermione.conf.js
- sets
- browsers
- gridUrl
- baseUrl
- httpTimeout
- pageLoadTimeout
- sessionRequestTimeout
- sessionQuitTimeout
- waitTimeout
- sessionsPerBrowser
- screenshotOnReject
- screenshotOnRejectTimeout
- testsPerSession
- retry
- shouldRetry
- calibrate
- meta
- windowSize
- screenshotDelay
- orientation
- resetCursor
- tolerance
- antialiasingTolerance
- screenshotsDir
- compareOpts
- buildDiffOpts
- system
- plugins
- prepareBrowser
- prepareEnvironment
- CLI
- Reporters
- Overriding settings
- Tests API
- Programmatic API
- Environment variables
- Test Collection
- Test Parser API
- Debug mode
Hermione
provides several features that WebdriverIO
doesn't, and makes the testing process easier.
If you are familiar with WebdriverIO and Mocha, you can start writing and running tests in 5 minutes! You need to install hermione
via npm and add a tiny config to your project. For details, see the Quick start section.
When tests are run one by one, it takes a lot of time. Hermione
can run tests in parallel sessions in different browsers out of the box.
Running of too many tests in parallel can lead to the overloading of the main process CPU usage which causes degradation in test passing time, so Hermione runs all tests in subprocesses in order to solve this problem.
WebdriverIO
provides built-in commands for browser and page manipulation. Often projects need to store some common code and reuse it throughout all tests, so the developer needs to create some helpers and include them in the tests.
With hermione
this is very simple and straightforward. You can add any number of custom commands in the hermione config and use them as this.browser.myCustomCommand
in tests.
Moreover, hermione
provides plugins that work like hooks. They allow the developer to prepare the testing environment and react properly to test execution events.
Integration tests use a dynamic environment with a lot of dependencies, where any of them could be unstable from time to time. As a result, integration tests turn red randomly, which makes them imprecise. This spoils the entire testing process.
To prevent incidental fails, hermione
retries a failed test before marking it as failed. This makes it possible to get rid of a majority of incidental fails. The number of retries can be specified for all browsers or for a specific browser.
Hermione
reruns tests in a new browser session to exclude situations when the browser environment is the cause of the failure.
Sometimes you only need to run specific tests, not all the tests in a set. Hermione
makes this possible. You can specify the path to the test file
hermione tests/func/mytest.js
or filter describes by using the --grep
option
hermione --grep login
or simply use the mocha
only()
API in the test
describe.only('user login', function() {...});
Sometimes you need to skip a test just in a specific browser, not in all browsers. For example, you don't need to run
some test in ugly IE browsers. In hermione
you can do this with hermione helper. For example,
you can skip some tests in a specific browser
describe('feature', function() {
hermione.skip.in('ie8', 'it cannot work in this browser');
it('nowaday functionality', function() {...});
});
or run tests in just one browser
describe('feature', function() {
// will be skipped in all browsers except Chrome
hermione.skip.notIn('chrome', 'it should work only in Chrome');
it('specific functionality', function() {...});
});
In these cases you will see messages in reports with the reason for skipping.
To skip a suite or test silently (without any messages in reports), you can pass the third argument with the silent flag:
hermione.skip.in('ie8', 'skipReason', {silent: true});
// or
hermione.skip.notIn('chrome', 'skipReason', {silent: true});
Or you can use another hermione helper, only, which is silent by default:
hermione.only.in('chrome');
// or
hermione.only.notIn('ie8');
hermione.only.in
will run tests only in the specified browsers and skip the rest silently.
hermione.only.notIn
will run tests in all browsers except the specified ones.
Hermione
lets you configure running some set of tests in specific browsers. For example,
sets: {
desktop: {
files: 'tests/desktop',
browsers: ['ie8', 'opera']
},
touch: {
files: 'tests/touch',
browsers: ['iphone', 'android']
}
}
See sets for more details.
All work with the grid client is encapsulated in hermione. Forget about client.init
and client.end
in your tests ;)
Request /session/:sessionId/orientation
is not a part of the official Webdriver specification, so commands orientation
and setOrientation
which are provided by client webdriverio
from the box do not guarantee screen rotate before the next command will start to execute, but Hermione
solves this problem.
Because hermione
is based on WebdriverIO
, you need to set up Selenium before proceeding further.
The simplest way to get started is to use one of the NPM selenium standalone packages, such as vvo/selenium-standalone. After installing it (globally), you can install drivers by command
selenium-standalone install
and run your server by executing
selenium-standalone start
No Java runtime present, requesting install.
you should install Java Development Kit (JDK) for your OS.
before
and after
hooks are forbidden in hermione
, you should use beforeEach
and afterEach
hooks instead. This feature was implemented in order to ensure better stability while running tests and make them independent of each other.
This feature allows you to ignore the specified suite or test in any browser, with an additional comment.
You can do this by using the global hermione.skip
helper. It supports the following methods:
.in
– Adds matchers for browsers with the additional comment..notIn
–.in
method with the reverted value.
Each of these methods takes the following arguments:
- browser {String|RegExp|Array<String|RegExp>} – Matcher for browser(s) to skip.
- [comment] {String} – Comment for skipped test.
- [options] {Object} – Additional options.
Note that matchers will be compared with browserId
specified in the config file, e.g. chrome-desktop
.
For example,
describe('feature', function() {
hermione.skip.in('chrome', "It shouldn't work this way in Chrome");
it('should work this way', function() {
return runTestThisWay();
});
it('should work that way', function() {
return runTestThatWay();
});
hermione.skip.in(['chrome', 'firefox', /ie\d*/], 'Unstable test, see ticket TEST-487');
it('should have done some tricky things', function() {
return runTrickyTest();
});
});
In this case, the behaviour it should work this way
will be skipped only in chrome
browser, but will be run in other browsers. It should work that way
will not be ignored. So only the nearest test will be skipped. If you need to skip all tests within a suite, you can apply the skip
helper to a describe
so all tests within this suite will be skipped with the same comment.
hermione.skip.in('chrome', 'skip comment');
describe('some feature', function() {
it(...);
it(...);
});
You can also use the .notIn
method to invert matching. For example,
// ...
hermione.skip.notIn('chrome', 'some comment');
it('should work this way', function() {
return doSomething();
});
// ...
In this case, the test will be skipped in all browsers except chrome
.
All of these methods are chainable, so you can skip a test in several browsers with different comments. For example,
// ...
hermione.skip
.in('chrome', 'some comment')
.notIn('ie9', 'another comment');
it('test1', function() {
return doSomething();
});
// ...
If you need to skip a test in all browsers without a comment, you can use mocha .skip
method instead of hermione.skip.in(/.*/);
. The result will be the same.
This feature allows you to ignore the specified suite or test in any browser silently (without any messages in reports).
You can do this by using the global hermione.only
helper. It supports two methods:
.in
— Thehermione.skip.notIn
method with the silent flag,.notIn
— Thehermione.skip.in
with the silent flag.
These methods take the following arguments:
- browser {String|RegExp|Array<String|RegExp>} — A matcher for browser(s) to skip.
For example:
// ...
hermione.only.in('chrome');
it('should work this way', function() {
return doSomething();
});
The test will be skipped all browsers silently except in chrome
.
hermione.only.notIn('ie9');
it('should work another way', function() {
return doSomething();
});
The test will be processed in all browsers and silently skipped in ie9
.
Hermione
adds some useful methods and properties to the webdriverio
session after its initialization.
Implemented via two commands:
- setMeta(key, value)
- getMeta([key])
These methods allow you to store some information between webdriver calls and it can then be used in custom commands, for instance. This meta information will be shown in the html-reporter.
Note: hermione saves the last URL opened in the browser in meta info.
Example:
it('test1', function() {
return this.browser
.setMeta('foo', 'bar')
.url('/foo/bar?baz=qux')
.getMeta('foo')
.then((val) => console.log(val)) // prints 'bar'
.getMeta('url')
.then((url) => console.log(url)) // prints '/foo/bar?baz=qux'
.getMeta()
.then((meta) => console.log(meta)) // prints `{foo: 'bar', url: '/foo/bar?baz=qux'}`
});
The execution context can be accessed by the browser.executionContext
property, which contains the current test/hook mocha object extended with the browser id.
Example:
it('some test', function() {
return this.browser
.url('/foo/bar')
.then(function() {
console.log('test', this.executionContext);
});
});
will print something like this
test: {
"title": "some test",
"async": 0,
"sync": true,
"timedOut": false,
"pending": false,
"type": "test",
"body": "...",
"file": "/foo/bar/baz/qux.js",
"parent": "#<Suite>",
"ctx": "#<Context>",
"browserId": "chrome",
"meta": {},
"timer": {}
}
First of all, make sure that all prerequisites are satisfied.
Install the package.
npm install hermione chai
Then put .hermione.conf.js
in the project root.
module.exports = {
sets: {
desktop: {
files: 'tests/desktop'
}
},
browsers: {
chrome: {
desiredCapabilities: {
browserName: 'chrome' // this browser should be installed on your OS
}
}
}
};
Write your first test in tests/desktop/github.js
file.
const assert = require('chai').assert;
describe('github', function() {
it('should find hermione', function() {
return this.browser
.url('https://github.com/gemini-testing/hermione')
.getText('#readme h1')
.then(function(title) {
assert.equal(title, 'Hermione')
});
});
});
Finally, run tests (be sure that you have already run selenium-standalone start
command in next tab).
node_modules/.bin/hermione
hermione
is tuned using a configuration file. By default, it uses .hermione.conf.js
, but you can use the --config
option to specify a path to the configuration file.
There is only one required field – browsers
.
module.exports = {
browsers: {
chrome: {
desiredCapabilities: {
browserName: 'chrome'
}
}
}
};
You can use sets to bind some set of tests to certain browsers.
Format of the sets section:
sets: {
common: { // run tests associated with this path in all browsers
files: 'tests/common' // which are configured in the `browsers` option
},
desktop: {
files: [
'tests/desktop/*.hermione.js',
'tests/common/*.hermione.js'
]
browsers: ['browser'] // run tests which match the specified masks in the browser with the `browser` id
}
}
-
files
– A list of test files or directories with test files. This can be a string if you want to specify just one file or directory. Also, you can use masks for this property. -
browsers
– A list of browser IDs to run the tests specified infiles
. All browsers by default.
You can specify sets to run using the CLI option --set
.
If sets are not specified in the config and paths were not passed from CLI, all files from the hermione
directory are launched in all browsers specified in the config.
Running tests using sets:
hermione --set desktop
Required. The list of browsers to use for running tests.
The browser section has the following format
browsers: {
<browser_id>: {
<option>:<value>
<option>:<value>
}
}
<browser-id>
value is used for browser identification.
Available browser options:
Option name | Description |
---|---|
desiredCapabilities |
Required. Used WebDriver DesiredCapabilities |
gridUrl |
Selenium grid URL. Default value is http://localhost:4444/wd/hub . |
baseUrl |
Base service-under-test URL. Default value is http://localhost . |
waitTimeout |
Timeout for web page event. Default value is 1000 ms. |
httpTimeout |
Timeout for any requests to Selenium server. Default value is 90000 ms. |
pageLoadTimeout |
Timeout for the page loading to complete. Default value is 300000 ms. |
sessionRequestTimeout |
Timeout for getting a browser session. Default value is httpTimeout . |
sessionQuitTimeout |
Timeout for quitting a session. Default value is httpTimeout . |
testTimeout |
Timeout for test execution (in milliseconds). Default value is null , in this case will be used common timeout for all browsers from system.mochaOpts.timeout . |
sessionsPerBrowser |
Number of sessions which are run simultaneously. Default value is 1 . |
screenshotOnReject |
Allows to attach a screenshot of a current page on test fail. Default value is true . |
screenshotOnRejectTimeout |
Timeout for taking screenshot on test fail. Default value is httpTimeout . |
testsPerSession |
Maximum amount of tests (it s) to run in each web driver session. |
retry |
How many times a test should be rerun. Default value is 0 . |
shouldRetry |
Function that determines whether to make a retry. By default returns true if retry attempts are available otherwise returns false . |
calibrate |
Allows to correctly capture the image. Default value is false . |
screenshotPath |
Directory to save screenshots by Webdriverio. Default value is null . |
meta |
Additional data that can be obtained via .getMeta() method |
windowSize |
Browser window dimensions. Default value is null . |
screenshotDelay |
Allows to specify a delay (in milliseconds) before making any screenshot. |
orientation |
Browser orientation that will be set before each test run. Default value is null . |
resetCursor |
Allows to configure whether to move mouse cursor to body coordinates (0, 0) before each test run. |
tolerance |
Maximum allowed CIEDE2000 difference between colors. Default value is 2.3 . |
antialiasingTolerance |
Minimum difference in brightness between the darkest/lightest pixel (which is adjacent to the antiasing pixel) and theirs adjacent pixels. Default value is 0 . |
compareOpts |
Options for comparing images. |
buildDiffOpts |
Options for building diff image. |
screenshotsDir |
Directory to save reference images for command assertView . Default dir is hermione/screens which is relative to process.cwd() . |
w3cCompatible |
Enable w3c compatible browsers support. Default value is false |
Selenium grid URL. Default value is http://localhost:4444/wd/hub
.
Base service-under-test URL. Default value is http://localhost
.
Timeout for any requests to Selenium server. Default value is 90000
ms.
Timeout for the page loading to complete. Default value is 300000
ms.
Timeout for getting a browser session. Default value is httpTimeout
.
Timeout for quitting a session. Default value is httpTimeout
.
Timeout for test execution (in milliseconds). Default value is null
, in this case will be used common timeout for all browsers from system.mochaOpts.timeout
.
Timeout for web page events. Default value is 1000
ms.
Number of sessions which are run simultaneously. Global value for all browsers. Default value is 1
.
Allows to attach a screenshot of a current page on test fail. Default value is true
.
Timeout for taking screenshot on test fail. Default value is httpTimeout
.
Maximum amount of tests (it
s) to run in each web driver session. After limit is reached, session will be closed and new one will be started.
By default is Infinity
(no limit, all tests will be run in the same session). Set to smaller number in case of problems with stability.
How many times a test should be retried if it fails. Global value for all browsers. Default value is 0
.
Function that determines whether to make a retry. Must return boolean value. By default returns true
if retry attempts are available otherwise returns false
.
Argument of this function is object with fields:
retriesLeft {Number}
— number of available retriesctx
— in case of testTEST_FAIL
it would be bound data, in case ofERROR
it would be link toRunnable
[error]
— error type (available only in case of ERROR)
Does this browser need to perform the calibration procedure. This procedure allows to correctly capture the image in case the particular WebDriver implementation captures browser UI along with web page. Default value is false
.
Additional data that can be obtained via .getMeta() method
Browser window dimensions (i.e. 1600x1200
). If not specified, the size of the window depends on WebDriver. Can be specified as string with pattern 800x1000
or object with width
and height
keys (both keys should be number). For example,
windowSize: '800x1000'
and
windowSize: {
width: 800,
height: 1000
}
are the same.
Allows to specify a delay (in milliseconds) before making any screenshot. This is useful when the page has elements which are animated or if you do not want to screen a scrollbar. Default value is 0
.
Browser orientation (landscape
, portrait
) that will be set before each test run. It is necessary in order to return the browser orientation to the default state after test execution in which orientation is changed. Default value is null
.
Allows to configure whether to move mouse cursor to body
coordinates (0, 0)
before each test run. This can be useful to escape cases when a default position of a cursor affects your tests. We recommend to set this option truthy value for desktop browsers and falsey for mobile devices. Default value is true
.
Indicates maximum allowed CIEDE2000 difference between colors. Used only in non-strict mode. By default it's 2.3 which should be enough for the most cases. Increasing global default is not recommended, prefer changing tolerance for particular suites or states instead.
Read more about this option in looks-same.
Extra options for comparing images. See looks-same documentation for the list of available options. Default values are:
compareOpts: {
stopOnFirstFail: false
}
Extra options for building diff image. See looks-same documentation for the list of available options. Default values are:
buildDiffOpts: {
ignoreAntialiasing: true,
ignoreCaret: true
}
Directory to save reference images for command assertView
. Default dir is hermione/screens
which is relative to process.cwd()
. The value of this option can also be a function which accepts one argument - an instance of a test within which comand assertView
is called.
Turn webdriver debug mode on. Default value is false
.
Extra options for mocha
which are passed to mocha.setup
. See Mocha documentation for the list of options. Default values are:
mochaOpts: {
slow: 10000, // If test execution time is greater than this value, then the test is slow.
timeout: 60000 // timeout for test execution.
}
A context which will be available in tests via method hermione.ctx
:
ctx: {
foo: 'bar'
}
it('awesome test', function() {
console.log(hermione.ctx); // {foo: 'bar'}
});
Recommendation: use ctx
in your tests in favor of global variables.
Session would be rejected if test has been faile with error message which matches to specified patterns:
patternsOnReject: [
/some-pattern/,
'other-pattern'
]
Hermione runs all tests in subprocesses in order to decrease the main process CPU usage. This options defines the numbers of subprocesses to start for running tests. Default value is 1
.
The maximum number of tests to be run in one worker before it will be restarted.
By default, hermione
will run all browsers simultaneously. Sometimes (i.e. when using cloud services, such as SauceLabs) you have to limit the amount of browsers that can be run at the same time. This option effectively limits how many browsers hermione
will try to run in parallel. Default value is Infinity
.
Hermione
plugins are commonly used to extend built-in functionality. For example, hermione-allure-reporter and hermione-tunnel.
A plugin is a module that exports a single function. The function has two arguments:
- The hermione instance
- Plugin options from the configuration file
Plugins will be loaded before hermione
runs tests.
It's strongly recommended to name hermione
plugins with the hermione-
prefix. This makes searching for user plugins very simple.
If a plugin name starts with hermione-
, then the prefix can be ommited in the configuration file. If two modules with names hermione-some-module
and some-module
are specified, the module with the prefix will have higher priority.
For example:
// .hermione.conf.js
// ...
plugins: {
'my-cool-plugin': {
param: 'value'
}
}
// ...
// hermione-my-cool-plugin/index.js
module.exports = function(hermione, opts) {
hermione.on(hermione.events.RUNNER_START, function(runner) {
return setUp(hermione.config, opts.param); // config can be mutated
});
hermione.on(hermione.events.RUNNER_END, function() {
return tearDown();
});
}
Properties of the hermione
object
Property name | Description |
---|---|
config |
Config that is used in the test runner. Can be mutated. |
events |
Events list for subscription. |
Available events which are triggered in the main process
Event | Description |
---|---|
INIT |
Will be triggered before any job start (run or readTests ). If handler returns a promise then job will start only after the promise will be resolved. Emitted only once no matter how many times job will be performed. |
BEFORE_FILE_READ |
Will be triggered on test files parsing before reading the file. The handler accepts data object with file , browser (browser id string), hermione (helper which will be available in test file) and testParser (TestParserAPI object) fields. |
AFTER_FILE_READ |
Will be triggered on test files parsing right after reading the file. The handler accepts data object with file , browser (browser id string) and hermione (helper which will be available in test file) fields. |
AFTER_TESTS_READ |
Will be triggered right after tests read via readTests or run methods with TestCollection object. |
RUNNER_START |
Will be triggered after worker farm initialization and before test execution. If a handler returns a promise, tests will be executed only after the promise is resolved. The handler accepts an instance of a runner as the first argument. You can use this instance to emit and subscribe to any other available events. |
RUNNER_END |
Will be triggered after test execution and before worker farm ends. If a handler returns a promise, worker farm will be ended only after the promise is resolved. The handler accepts an object with tests execution statistics. |
NEW_WORKER_PROCESS |
Will be triggered after new subprocess is spawned. The handler accepts a restricted process object with only send method. |
SESSION_START |
Will be triggered after browser session initialization. If a handler returns a promise, tests will be executed only after the promise is resolved. The handler accepts an instance of webdriverIO as the first argument and an object with a browser identifier as the second. |
SESSION_END |
Will be triggered after the browser session ends. If a handler returns a promise, tests will be executed only after the promise is resolved. The handler accepts an instance of webdriverIO as the first argument and an object with a browser identifier as the second. |
BEGIN |
Will be triggered before test execution, but after all the runners are initialized. |
END |
Will be triggered just before RUNNER_END event. The handler accepts a stats of tests execution. |
SUITE_BEGIN |
Test suite is about to execute. |
SUITE_END |
Test suite execution is finished. |
TEST_BEGIN |
Test is about to execute. |
TEST_END |
Test execution is finished. |
TEST_PASS |
Test passed. |
TEST_FAIL |
Test failed. |
TEST_PENDING |
Test is skipped. |
RETRY |
Test failed but went to retry. |
ERROR |
Generic (no tests) errors. |
INFO |
Reserved. |
WARNING |
Reserved. |
EXIT |
Will be triggered when SIGTERM is received (for example, Ctrl + C). The handler can return a promise. |
Available events which are triggered in subprocesses
Event | Description |
---|---|
BEFORE_FILE_READ |
Will be triggered on test files parsing before reading the file. The handler accepts data object with file , browser (browser id string), hermione (helper which will be available in test file) and testParser (TestParserAPI object) fields. |
AFTER_FILE_READ |
Will be triggered on test files parsing right after reading the file. The handler accepts data object with file , browser (browser id string) and hermione (helper which will be available in test file) fields. |
AFTER_TESTS_READ |
Will be triggered right after tests read each time some file is being reading during test run. |
NEW_BROWSER |
Will be triggered after new browser instance created. The handler accepts an instance of webdriverIO as the first argument and an object with a browser identifier as the second. |
UPDATE_REFERENCE |
Will be triggered after updating reference image. |
REMARK!
Events which are triggered in the main process and subprocesses can not share information between each other, for example:
module.exports = (hermione) => {
let flag = false;
hermione.on(hermione.events.RUNNER_START, () => {
flag = true;
});
hermione.on(hermione.events.NEW_BROWSER, () => {
// outputs `false`, because `NEW_BROWSER` event was triggered in a subprocess,
// but `RUNNER_START` was not
console.log(flag);
});
hermione.on(hermione.events.RUNNER_END, () => {
// outputs `true`
console.log(flag);
});
};
But you can solve such problem this way:
module.exports = (hermione, opts) => {
hermione.on(hermione.events.RUNNER_START, () => {
opts.flag = true;
});
hermione.on(hermione.events.NEW_BROWSER, () => {
// outputs `true`, because properties in a config (variable `opts` is a part of a config)
// which have raw data types are passed to subprocesses after `RUNNER_START` event
console.log(opts.flag);
});
};
Besides, you have the ability to intercept events in plugins and translate them to other events:
module.exports = (hermione) => {
hermione.intercept(hermione.events.TEST_FAIL, ({event, data}) => {
const test = Object.create(data);
test.pending = true;
test.skipReason = 'intercepted failure';
return {event: hermione.events.TEST_PENDING, data: test};
});
hermione.on(hermione.events.TEST_FAIL, (test) => {
// this event handler will never be called
});
hermione.on(hermione.evenst.TEST_PENDING, (test) => {
// this event handler will always be called instead of 'TEST_FAIL' one
});
};
If for some reason interceptor should not translate passed event to another one you can return the same object or some falsey value:
module.exports = (hermione) => {
hermione.intercept(hermione.events.TEST_FAIL, ({event, data}) => {
return {event, data};
// return;
// return null;
// return false;
});
hermione.on(hermione.events.TEST_FAIL, (test) => {
// this event handler will be called as usual because interceptor does not change event
});
};
If for some reason interceptor should ignore passed event and do not translate it to any other listeners you can return an empty object:
module.exports = (hermione) => {
hermione.intercept(hermione.events.TEST_FAIL, ({event, data}) => {
return {};
});
hermione.on(hermione.events.TEST_FAIL, (test) => {
// this event handler will NEVER be called because interceptor ignores it
});
};
The above feature can be used to delay triggering of some events, for example:
module.exports = (hermione) => {
const intercepted = [];
hermione.intercept(hermione.events.TEST_FAIL, ({event, data}) => {
intercepted.push({event, data});
return {};
});
hermione.on(hermione.events.END, () => {
intercepted.forEach(({event, data}) => hermione.emit(event, data));
});
};
Available events which can be intercepted
Event |
---|
SUITE_BEGIN |
SUITE_END |
TEST_BEGIN |
TEST_END |
TEST_PASS |
TEST_FAIL |
RETRY |
Runner has a method registerWorkers
which register plugin's code for parallel execution in Hermione's worker farm. The method accepts parameters workerFilepath
(string, absolute path), exportedMethods
(array of string) and return object which contains async functions with names from exportedMethods
. File with path workerFilepath
should export object which contains async functions with names from exportedMethods
.
Example
// plugin code
let workers;
module.exports = (hermione) => {
hermione.on(hermione.events.RUNNER_START, async (runner) => {
const workerFilepath = require.resolve('./worker');
const exportedMethods = ['foo'];
workers = runner.registerWorkers(workerFilepath, exportedMethods);
// outputs `FOO_RUNNER_START`
console.log(await workers.foo('RUNNER_START'));
});
hermione.on(hermione.events.RUNNER_END, async () => {
// outputs `FOO_RUNNER_END`
console.log(await workers.foo('RUNNER_END'));
});
};
// worker.js
module.exports = {
foo: async function(event) {
return 'FOO_' + event;
}
};
Prepare the browser session before tests are run. For example, add custom user commands.
prepareBrowser: function(browser) {
browser.addCommand('commandName', require('./path/to/commands/commandName.js'));
}
The browser
argument is a WebdriverIO
session.
Configuration data can be changed depending on extra conditions in the prepareEnvironment
function.
hermione --help
shows the following
Usage: hermione [options] [paths...]
Options:
-V, --version output the version number
-c, --config <path> path to configuration file
-r, --reporter <reporter> test reporters
-b, --browser <browser> run tests only in specified browser
-s, --set <set> run tests only in the specified set
--grep <grep> run only tests matching the pattern
--update-refs update screenshot references or gather them if they do not exist ("assertView" command)
--inspect [inspect] nodejs inspector on [=[host:]port]
--inspect-brk [inspect-brk] nodejs inspector with break at the start
-h, --help output usage information
For example,
hermione --config ./config.js --reporter flat --browser firefox --grep name
Note. All CLI options override config values.
You can choose flat
or plain
reporter by option -r, --reporter
. Default is flat
.
-
flat
– all information about failed and retried tests would be grouped by browsers at the end of the report. -
plain
– information about fails and retries would be placed after each test.
All options can also be overridden via command-line flags or environment variables. Priorities are the following:
-
A command-line option has the highest priority. It overrides the environment variable and config file value.
-
An environment variable has second priority. It overrides the config file value.
-
A config file value has the lowest priority.
-
If there isn't a command-line option, environment variable or config file option specified, the default is used.
To override a config setting with a CLI option, convert the full option path to --kebab-case
. For example, if you want to run tests against a different base URL, call:
hermione path/to/mytest.js --base-url http://example.com
To change the number of sessions for Firefox (assuming you have a browser with the firefox
id in the config):
hermione path/to/mytest.js --browsers-firefox-sessions-per-browser 7
To override a setting with an environment variable, convert its full path to snake_case
and add the hermione_
prefix. The above examples can be rewritten to use environment variables instead of CLI options:
hermione_base_url=http://example.com hermione path/to/mytest.js
hermione_browsers_firefox_sessions_per_browser=7 hermione path/to/mytest.js
Command that adds ability to take screenshot for test state. Each state should have his own unique name. For example:
it('some test', function() {
return this.browser
.url('some/url')
.assertView('plain', '.button')
.click('.button')
.assertView('clicked', '.button');
});
Parameters:
- state (required)
String
– state name; should be unique within one test - selector (required)
String|String[]
– DOM-node selector that you need to capture - opts (optional)
Object
:- ignoreElements (optional)
String|String[]
– elements, matching specified selectors will be ignored when comparing images - tolerance (optional)
Number
– overrides config browsers.tolerance value - allowViewportOverflow (optional)
Boolean
– by default Hermione throws an error if element is outside the viewport's bounds, this option disables such check and makes command to screenshot the visible part of the element
- ignoreElements (optional)
Full example:
it('some test', function() {
return this.browser
.url('some/url')
.assertView('plain', '.form', {ignoreElements: ['.link'], tolerance: 5, allowViewportOverflow: true});
});
For tests which have been just written using assertView
command you need to update reference images, so for the first time hermione
should be run with option --update-refs
or via command gui
which is provided by plugin html-reporter (we highly recommend to use gui
command instead of option --update-refs
).
With the API, you can use Hermione programmatically in your scripts or build tools.
const Hermione = require('hermione');
const hermione = new Hermione(config);
- config (required)
String
– Path to the configuration file that will be read relative toprocess.cwd
.
hermione.init().done();
Initializes hermione instance, load all plugins ans so on.
hermione.run(testPaths, options)
.then((success) => process.exit(success ? 0 : 1))
.catch((e) => {
console.log(e.stack);
process.exit(1);
})
.done();
- testPaths (optional)
String[]|TestCollection
– Paths to tests relative toprocess.cwd
. Also accepts test collection returned byreadTests
. - options (optional)
Object
- reporters (optional)
String[]
– Test result reporters. - browsers (optional)
String[]
– Browsers to run tests in. - sets (optional)
String[]
– Sets to run tests in. - grep (optional)
RegExp
– Pattern that defines which tests to run.
- reporters (optional)
hermione.addTestToRun(test, browser);
Adds test to the current run.
- test (required)
Test
– Test to run. - browserId (required)
String
– Browser to run test in.
Returns false
if current run is ended or cancelled, true
otherwise.
hermione.readTests(testPaths, options).done();
- testPaths (required)
String[]
– Paths to tests relative toprocess.cwd
. - options (optional)
Object
:- browsers (optional)
String[]
– Read tests only for the specified browsers. - silent (optional)
Boolean
– flag to disable events emitting while reading tests; default isfalse
. - ignore (optional)
String|Glob|Array<String|Glob>
- patterns to exclude paths from the test search.
- browsers (optional)
Returns promise which resolves to the instance of TestCollection
initialized by parsed tests
hermione.isFailed();
Returns true
or false
depending on whether there has been an error or a test fail while running tests; can be useful in plugins to
determine current Hermione status.
hermione.isWorker();
Returns true
or false
depending on whether you call the method in one of the workers or in the master process; can be useful in plugins to share some code execution between the master process and its workers, for example:
// implementation of some plugin
module.exports = (hermione) => {
if (hermione.isWorker()) {
// do some stuff only in workers
} else {
// do some stuff only in the master process
}
};
hermione.halt(error, [timeout=60000ms]);
Method for abnormal termination of the test run in case of a terminal error. If process fails to gracefully shutdown in timeout
milliseconds, it would be forcibly terminated (unless timeout
is explicitly set to 0
).
Skip the browsers specified in the config by passing the browser IDs. Multiple browser IDs should be separated by commas (spaces after commas are allowed).
For example,
HERMIONE_SKIP_BROWSERS=ie10,ie11 hermione
TestCollection object is returned by hermione.readTests
method.
TestCollection API:
-
getBrowsers()
— returns list of browsers for which there are tests in collection. -
mapTests(browserId, (test, browserId) => ...)
- maps over tests for passed browser. If first argument (browserId
) is omitted than method will map over tests for all browsers. -
sortTests(browserId, (currentTest, nextTest) => ...)
- sorts over tests for passed browser. If first argument (browserId
) is omitted than method will sort over tests for all browsers. -
eachTest(browserId, (test, browserId) => ...)
- iterates over tests for passed browser. If first argument (browserId
) is omitted than method will iterate over tests for all browsers. -
disableAll([browserId])
- disables all tests. Disables tests for specific browser ifbrowserId
passed. Returns current test collection instance. -
enableAll([browserId])
- enables all previously disabled tests. Enables tests for specific browser ifbrowserId
passed. Returns current test collection instance. -
disableTest(fullTitle, [browserId])
- disables test with passed full title. Disables test only in specific browser ifbrowserId
passed. Returns current test collection instance. -
enableTest(fullTitle, [browserId])
- enables test with passed full title. Enables test only in specific browser ifbrowserId
passed. Returns current test collection instance. -
getRootSuite(browserId)
- returns root suite for passed browser. Returnsundefined
if there are no tests in collection for passed browser. -
eachRootSuite((root, browserId) => ...)
- iterates over all root suites in collection which have some tests.
TestParserAPI
object is emitted on BEFORE_FILE_READ
event. It provides the ability to customize test parsing process.
Adds controller to hermione
object in test files.
name
- controller namemethods
- an object with names as keys and callbacks as values describing controller methods. Each callback will be called on corresponding test or suite.
Example:
// in plugin
hermione.on(hermione.events.BEFORE_FILE_READ, ({file, browser, testParser}) => {
testParser.setController('logger', {
log: function(prefix) {
console.log(`${prefix}: Just parsed ${this.fullTitle()} from file ${file} for browser ${browser}`);
}
});
});
// in test file
describe('foo', () => {
hermione.logger.log('some-prefix');
it('bar', function() {
// ...
});
});
Note: controller will be removed as soon as current file will be parsed
In order to understand what is going on in the test step by step, there is a debug mode. You can run tests in this mode using these options: --inspect and --inspect-brk. The difference between them is that the second one stops before executing the code.
Example:
hermione path/to/mytest.js --inspect
Note: In the debugging mode, only one worker is started and all tests are performed only in it.
Use this mode with option sessionsPerBrowser=1
in order to debug tests one at a time.