Description: Periodically read from or write to a block device Usage: bdbusy [options] BLOCK_DEVICE Options: --blocks N Read N blocks per round. Default 256 blocks. --blocksize N Set the block size to N bytes. Default 4096 bytes. --delay N Set the delay between reads to N seconds. Default 5 seconds. --email mail@example.com Set the e-mail address where failure notifications should be sent. -h, --help Display this help message and exit. -n N Sets the niceness to N (default 0). -v Show each read round. The same as --verbose 1. --verbose # Use more or less verbose output. Valid values are from 0 to 1 inclusive: 0 Default. No output 1 Show each read round -w, --write Write instead of read. Examples: bdbusy /dev/disk/by-id/ata-ST8000AS0002-1NA17Z_00000000 bdbusy -v /dev/disk/by-id/ata-ST8000AS0002-1NA17Z_00000000 Version: bdbusy 1.3.0.0 Copyright (C) 2012 Nathan Shearer Licensed under GNU General Public License 2.0