nathanmarlor / foxess_modbus_charge_period_card

Custom Home Assistant Cards for the FoxESS Modbus Integration

FoxESS - Modbus Charge Period Card

Introduction

This is lovelace card which works with the Foxess - Modbus integration to let you set and configure charge periods.

This is supported by the following inverters:

• H1 (including AC1 and AIO) using RS485

This provides the same functionality as the FoxESS app.

Installation

First, make sure that you have installed the Foxess - Modbus integration version 1.7.0 or higher, and have configured at least one supported inverter.

Recommend installation is through HACS.

Either use this link or:

1. Navigate to "HACS" in the left menu
2. Select "Frontend"
3. "Explore & Download Repositories" in the bottom right
4. Search for "FoxESS - Modbus: Charge Period Card"
5. Click "Download" in the bottom right
6. When prompted, click "Reload"

Then add it to one of your dashboards

1. On a dashboard, select "Edit Dashboard" then "Add Card"
2. Search for "FoxESS - Modbus: Charge Period Card", and select
3. Select your inverter using the drop-down
4. Click "Save"

Usage

• Enable Charge Period: Whether the charge period is enabled. A charge period will prevent your batteries from discharging between the specified times.
• Enable charge from grid: If selected, your batteries will charge from the grid during this period. If deselected, your batteries won't charge or discharge.

After making changes, click "Save" to save them to your inverter.

---