Project.20_07_2024.mp4
aka Rain's Turbo (made for Rain)
This flex PCB is made for a GBC PCB to add a turbo button mode to the B button. You could rework the PCB to make it work on any other button. This one was made with Metroid II in mind.
You can support me on Ko-Fi
My socials
• Modded Gameboy Club - a club dedicated to the modification of Game Boys, freely sharing resources
Order from your favourite fab as a flex PCB.
| Designator | Part | Link |
|---|---|---|
| U1 | CH552E | AliExpress Link |
| R1 | 0603 1K | |
| C1, C2 | 0603 100nF | |
| Program Button | x | AliExpress Link |
| Trigger Button | 7mm if you want to cut the shell, 5-6mm otherwise | AliExpress Link |
Solder up a USB to the 5V, GND, D+ and D- pads. To set up with Arduino, please follow the instructions here
https://github.com/DeqingSun/ch55xduino
Please do not remove my logo, website and name.
The CC BY-SA 4.0 (Creative Commons Attribution-ShareAlike 4.0 International) license allows you to:
- Share - Copy and redistribute the material in any medium or format.
- Adapt - Remix, transform, and build upon the material for any purpose, even commercially.
- Attribution - You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- ShareAlike - If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.