Korg Taktile-49 in Bitwig Studio.
Taktile-49 can work in two different modes. By default (let's call it Default Mode), some of its buttons (for example, DAW functions or knobs/sliders when [CONTROL MODE] is off) are at midi 1 channel, others - at midi 0. In this case taktile-49 works like generic controller (midi 0) and mcu pro (midi 1). It is easy to configure, but there're some disadvantages:
- I don't know how to turn on/off leds in this mode
- You can't distinguish beetwen pad events and note events as long as pad sends notes
But there's also documented Native Mode. In Native Mode [CONTROL MODE], [CHORD SCALE], [NOTE/CONTROL] and some other buttons becomes useless, but leds works and you get 8 pad pages compatible with Bitwig Drum Machine.
By default, plugin sets taktile-49 into Native Mode, but you can switch back by pressing [SET] + [CYCLE].
In Native Mode [CONTROL MODE] button is emulated. To toggle between Control Mode and Mixer Mode press [SET] + [PREV TRACK] + [NEXT TRACK]. There is also 'control' or 'mixer' message on display depending on what mode is now on.
Buttons | Actions |
---|---|
[REW] | rewind |
[FF] | fast-forward |
[STOP] | stop |
[SET]+[STOP] | reset automation overrider |
[PLAY] | play/restart |
[SET]+[PLAY] | return to arrangement |
[RECORD] | toggle record |
[SET]+[RECORD] | arm/disarm track |
[CYCLE] | toggle arranger loop |
[SET]+[CYCLE] | toggle between Native Mode and Default Mode |
[PREV MARKER] | select previous remote controls page |
[NEXT MARKER] | select next remote controls page |
[SET]+[PREV MARKER] | select previous device in chain |
[SET]+[NEXT MARKER] | select next device in chain |
[PREV TRACK] | select previous track |
[NEXT TRACK] | select next track |
[SET]+[PREV TRACK] | scroll track bank up |
[SET]+[NEXT TRACK] | scroll track bank down |
[SET]+[PREV TRACK]+[NEXT TRACK] | toggle between Mixer Mode and Control Mode (Native Mode only) |
[CYCLE]+[PREV MARKER] | select previous scene |
[CYCLE]+[NEXT MARKER] | select next scene |
Buttons | Actions |
---|---|
[KNOB n] | modify n-th parameter on currently selected device and parameter page |
[SET]+[KNOB n] | reset n-th parameter on currently selected device and parameter page |
[SOLO n] | select n-th parameter page |
[MUTE n] | select n-th drum pad bank (Native Mode only) |
Buttons | Actions |
---|---|
[PAD 1-8] | start clip in scene |
[PAD 9-16] | stop clip in scene |
[KNOB n] | change n-th track's pan |
[SET]+[KNOB n] | reset n-th track's pan |
[SLIDER n] | change n-th track's volume |
[SET]+[SLIDER n] | reset n-th track's volume |
[SOLO n] | toggle n-th track's solo |
[MUTE n] | toggle n-th track's mute |
[REC n] | toggle n-th track rec |