musicb0x / mini-web-radio

A small simple to use internet radio based around the ESP32

Mini Web Radio

Builders Guide now available on Instructables !

Originally designed as a charity project, the MWR is a simple single-station battery powered internet radio. The design features a combined power-volume dial and 3.5mm headphone socket, utilising a 3D printed case and is based around:

• WeMos Lolin32 Lite (ESP32)
• MAX98357A I2S Dac Amplifier
• 18650 Lithium Battery

Documents

• Build Guide

• User Guide

• Technical Guide

• Bill Of Materials

Configuration

The MWR has built-in browser based configuration which allows you to define the Hostname, Wireless network credentials and the playback URL.

Enable Configuration mode

1. Switch Off MWR
2. Open Faceplate
3. Install jumper (2.54mm) or short pins 13 and 15
4. Turn On MWR
5. Connect to MWR-WIFI-SETUP network
6. Remove Jumper
7. Navigate browser to 192.168.1.1
8. Enter configuration Details and select Save
9. The MWR will automatically restart into radio mode and begin playback

Firmware

Code for both the Arduino IDE and Plaform.io are included under the firmare directory

Arduino IDE

A more detailed guide for installing and setting up the Arduino IDE can be found on the Wiki

1. Download and install the following libaries:

   • ESPAsyncWebServer

   • ESP32-AudioI2S

2. Download and install the following Tools:

   • ESPTool_py

3. Add the Additional Board URL to the IDE properties (File > Preferences)

   https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json

4. Using the Board Manager add the board esp32 - by Expressif Systems (Tools > Board Manager)

5. Select the board: Lolin32 Lite

Enclosure

Files for 3D printing the shell, face and dial are provided in the CAD directory. The enclosure uses a snaplock design to secure the face to the shell which can be difficult to lock into place initially, a small screw driver or spudger can make it easier to pry it open and closed.

Print Settings:

These are just the settings that have worked for me, your milage may differ

• 0.4mm Nozzle
• 0.2mm Layer Height
• 5% Infill
• 1.75mm PLA+ Filament

Schematic