mumblebaj / MMM-Growatt

MagicMirror² module - To get and display Growatt Inverter information on you MM

MMM-Growatt

A MagicMirror² module to display Growatt Power Plant Data from Growatt.

Dependencies

• growatt
• Requires MagicMirror² v2.21.0. Built and tested on this version. May work on earlier versions but not tested nor supported.
• Requires that you have an account on Growatt.com

Installation

In your terminal, go to your MagicMirror's Module folder:

cd ~/MagicMirror/modules

Clone this repository:

git clone https://github.com/mumblebaj/MMM-Growatt.git

cd MMM-Growatt
npm install

Add the module to the modules array in the config/config.js file:

        {
            module: "MMM-Growatt",
            position: "middle_center", //Works best at middle_center. May not display all that well in other positions
            disabled: false,
            config: {
                username: "username",
                password: "password",
                plantId: "plantId", // Can be obtained from the Growatt site by checking your Plant information. This can be accessed from the left side of the screen
                updateInterval: 1000*60*30 ,//Update every 30 minutes
                deviceSerial: "deviceSerial" //This is the device serial number. Can be found under Input Search Number. 
                        }
},

Updating

To update the module to the latest version, use your terminal to go to your MMM-Growatt module folder and type the following command:

cd MMM-Growatt
git pull
npm install