SparkFun Safe Cracker
A robot with some tricks to open combination safes.
We were able to crack our Craigslist safe in 40 minutes and 42 seconds! You can re-watch the live cracking if you'd like. The magic moment occurs at 45:20 but start around 44:30 to get the full scope of what's going on.
The full tutorial is here.
Repository Contents
- /Hardware - The layout of the Safe Cracker shield in EAGLE PCB
- /Firmware - Source code that runs on the RedBoard
- /3D - STL files for the dial coupler, handle puller, nautilus horn, and electronics base plate
- live_crack_serial.log - Output from the robot during the live stream.
License Information
This project is open source!
Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
Distributed as-is; no warranty is given.
- Your friends at SparkX