MRSK
MRSK deploys web apps anywhere from bare metal to cloud VMs using Docker with zero downtime. It uses the dynamic reverse-proxy Traefik to hold requests while the new application container is started and the old one is stopped. It works seamlessly across multiple hosts, using SSHKit to execute commands. It was built for Rails applications, but works with any type of web app that can be containerized with Docker.
Watch the screencast: https://www.youtube.com/watch?v=LL1cV2FXZ5I
Join us on Discord: https://discord.gg/YgHVT7GCXS
Ask questions: https://github.com/mrsked/mrsk/discussions
Installation
If you have a Ruby environment available, you can install MRSK globally with:
gem install mrsk
...otherwise, you can run a dockerized version via an alias (add this to your .bashrc or similar to simplify re-use):
alias mrsk='docker run --rm -it -v $HOME/.ssh:/root/.ssh -v /var/run/docker.sock:/var/run/docker.sock -v ${PWD}/:/workdir ghcr.io/mrsked/mrsk'
Then, inside your app directory, run mrsk init
(or mrsk init --bundle
within Rails 7+ apps where you want a bin/mrsk binstub). Now edit the new file config/deploy.yml
. It could look as simple as this:
service: hey
image: 37s/hey
servers:
- 192.168.0.1
- 192.168.0.2
registry:
username: registry-user-name
password:
- MRSK_REGISTRY_PASSWORD
env:
secret:
- RAILS_MASTER_KEY
Then edit your .env
file to add your registry password as MRSK_REGISTRY_PASSWORD
(and your RAILS_MASTER_KEY
for production with a Rails app).
Now you're ready to deploy to the servers:
mrsk setup
This will:
- Connect to the servers over SSH (using root by default, authenticated by your ssh key)
- Install Docker and curl on any server that might be missing it (using apt-get): root access is needed via ssh for this.
- Log into the registry both locally and remotely
- Build the image using the standard Dockerfile in the root of the application.
- Push the image to the registry.
- Pull the image from the registry onto the servers.
- Ensure Traefik is running and accepting traffic on port 80.
- Ensure your app responds with
200 OK
toGET /up
(you must have curl installed inside your app image!). - Start a new container with the version of the app that matches the current git version hash.
- Stop the old container running the previous version of the app.
- Prune unused images and stopped containers to ensure servers don't fill up.
Voila! All the servers are now serving the app on port 80. If you're just running a single server, you're ready to go. If you're running multiple servers, you need to put a load balancer in front of them. For subsequent deploys, or if your servers already have Docker and curl installed, you can just run mrsk deploy
.
Rails <7 usage
MRSK is not needed to be in your application Gemfile to be used. However, if you want to guarantee specific MRSK version in your CI/CD workflows, you can create a separate Gemfile for MRSK, for example, gemfile/mrsk.gemfile
:
source 'https://rubygems.org'
gem 'mrsk', '~> 0.14'
Bundle with BUNDLE_GEMFILE=gemfiles/mrsk.gemfile bundle
.
After this MRSK can be used for deployment:
BUNDLE_GEMFILE=gemfiles/mrsk.gemfile bundle exec mrsk deploy
Vision
In the past decade+, there's been an explosion in commercial offerings that make deploying web apps easier. Heroku kicked it off with an incredible offering that stayed ahead of the competition seemingly forever. These days we have excellent alternatives like Fly.io and Render. And hosted Kubernetes is making things easier too on AWS, GCP, Digital Ocean, and elsewhere. But these are all offerings that have you renting computers in the cloud at a premium. If you want to run on your own hardware, or even just have a clear migration path to do so in the future, you need to carefully consider how locked in you get to these commercial platforms. Preferably before the bills swallow your business whole!
MRSK seeks to bring the advance in ergonomics pioneered by these commercial offerings to deploying web apps anywhere. Whether that's low-cost cloud options without the managed-service markup from the likes of Digital Ocean, Hetzner, OVH, etc., or it's your own colocated bare metal. To MRSK, it's all the same. Feed the config file a list of IP addresses with vanilla Ubuntu servers that have seen no prep beyond an added SSH key, and you'll be running in literally minutes.
This approach gives you enormous portability. You can have your web app deployed on several clouds at ease like this. Or you can buy the baseline with your own hardware, then deploy to a cloud before a big seasonal spike to get more capacity. When you're not locked into a single provider from a tooling perspective, there are a lot of compelling options available.
Ultimately, MRSK is meant to compress the complexity of going to production using open source tooling that isn't tied to any commercial offering. Not to zero, mind you. You're probably still better off with a fully managed service if basic Linux or Docker is still difficult, but as soon as those concepts are familiar, you'll be ready to go with MRSK.
Why not just run Capistrano, Kubernetes or Docker Swarm?
MRSK basically is Capistrano for Containers, without the need to carefully prepare servers in advance. No need to ensure that the servers have just the right version of Ruby or other dependencies you need. That all lives in the Docker image now. You can boot a brand new Ubuntu (or whatever) server, add it to the list of servers in MRSK, and it'll be auto-provisioned with Docker, and run right away. Docker's layer caching also speeds up deployments with less mucking about on the server. And the images built for MRSK can be used for CI or later introspection.
Kubernetes is a beast. Running it yourself on your own hardware is not for the faint of heart. It's a fine option if you want to run on someone else's platform, either transparently like Render or explicitly on AWS/GCP, but if you'd like the freedom to move between cloud and your own hardware, or even mix the two, MRSK is much simpler. You can see everything that's going on, it's just basic Docker commands being called.
Docker Swarm is much simpler than Kubernetes, but it's still built on the same declarative model that uses state reconciliation. MRSK is intentionally designed around imperative commands, like Capistrano.
Ultimately, there are a myriad of ways to deploy web apps, but this is the toolkit we're using at 37signals to bring HEY home from the cloud without losing the advantages of modern containerization tooling.
Running MRSK from Docker
MRSK is packaged up in a Docker container similarly to rails/docked. This will allow you to run MRSK (from your application directory) without having to install any dependencies other than Docker. Add the following alias to your profile configuration to make working with the container more convenient:
alias mrsk="docker run -it --rm -v '${PWD}:/workdir' -v '${SSH_AUTH_SOCK}:/ssh-agent' -v /var/run/docker.sock:/var/run/docker.sock -e 'SSH_AUTH_SOCK=/ssh-agent' ghcr.io/mrsked/mrsk:latest"
Since MRSK uses SSH to establish a remote connection, it will need access to your SSH agent. The above command uses a volume mount to make it available inside the container and configures the SSH agent inside the container to make use of it.
Configuration
Using .env file to load required environment variables
MRSK uses dotenv to automatically load environment variables set in the .env
file present in the application root. This file can be used to set variables like MRSK_REGISTRY_PASSWORD
or database passwords. But for this reason you must ensure that .env files are not checked into Git or included in your Dockerfile! The format is just key-value like:
MRSK_REGISTRY_PASSWORD=pw
DB_PASSWORD=secret123
Using a generated .env file
1Password as a secret store
If you're using a centralized secret store, like 1Password, you can create .env.erb
as a template which looks up the secrets. Example of a .env.erb file:
<% if (session_token = `op signin --account my-one-password-account --raw`.strip) != "" %># Generated by mrsk envify
GITHUB_TOKEN=<%= `gh config get -h github.com oauth_token`.strip %>
MRSK_REGISTRY_PASSWORD=<%= `op read "op://Vault/Docker Hub/password" -n --session #{session_token}` %>
RAILS_MASTER_KEY=<%= `op read "op://Vault/My App/RAILS_MASTER_SECRET" -n --session #{session_token}` %>
MYSQL_ROOT_PASSWORD=<%= `op read "op://Vault/My App/MYSQL_ROOT_PASSWORD" -n --session #{session_token}` %>
<% else raise ArgumentError, "Session token missing" end %>
This template can safely be checked into git. Then everyone deploying the app can run mrsk envify
when they setup the app for the first time or passwords change to get the correct .env
file.
If you need separate env variables for different destinations, you can set them with .env.destination.erb
for the template, which will generate .env.staging
when run with mrsk envify -d staging
.
Note: If you utilize biometrics with 1Password you can remove the session_token
related parts in the example and just call op read op://Vault/Docker Hub/password -n
.
Bitwarden as a secret store
If you are using open source secret store like bitwarden, you can create .env.erb
as a template which looks up the secrets.
You can store SOME_SECRET
in a secure note in bitwarden vault.
$ bw list items --search SOME_SECRET | jq
? Master password: [hidden]
[
{
"object": "item",
"id": "123123123-1232-4224-222f-234234234234",
"organizationId": null,
"folderId": null,
"type": 2,
"reprompt": 0,
"name": "SOME_SECRET",
"notes": "yyy",
"favorite": false,
"secureNote": {
"type": 0
},
"collectionIds": [],
"revisionDate": "2023-02-28T23:54:47.868Z",
"creationDate": "2022-11-07T03:16:05.828Z",
"deletedDate": null
}
]
and extract the id
of SOME_SECRET
from the json
above and use in the erb
below.
Example .env.erb
file:
<% if (session_token=`bw unlock --raw`.strip) != "" %># Generated by mrsk envify
SOME_SECRET=<%= `bw get notes 123123123-1232-4224-222f-234234234234 --session #{session_token}` %>
<% else raise ArgumentError, "session_token token missing" end %>
Then everyone deploying the app can run mrsk envify
and mrsk will generate .env
Using another registry than Docker Hub
The default registry is Docker Hub, but you can change it using registry/server
:
registry:
server: registry.digitalocean.com
username:
- DOCKER_REGISTRY_TOKEN
password:
- DOCKER_REGISTRY_TOKEN
A reference to secret DOCKER_REGISTRY_TOKEN
will look for ENV["DOCKER_REGISTRY_TOKEN"]
on the machine running MRSK.
Using AWS ECR as the container registry
AWS ECR's access token is only valid for 12hrs. In order to not have to manually regenerate the token every time, you can use ERB in the deploy.yml
file to shell out to the aws
cli command, and obtain the token:
registry:
server: <your aws account id>.dkr.ecr.<your aws region id>.amazonaws.com
username: AWS
password: <%= %x(aws ecr get-login-password) %>
You will need to have the aws
CLI installed locally for this to work.
Using a different SSH user than root
The default SSH user is root, but you can change it using ssh/user
:
ssh:
user: app
If you are using non-root user (app
as above example), you need to bootstrap your servers manually, before using them with MRSK. On Ubuntu, you'd do:
sudo apt update
sudo apt upgrade -y
sudo apt install -y docker.io curl git
sudo usermod -a -G docker app
Using a proxy SSH host
If you need to connect to server through a proxy host, you can use ssh/proxy
:
ssh:
proxy: "192.168.0.1" # defaults to root as the user
Or with specific user:
ssh:
proxy: "app@192.168.0.1"
Also if you need specific proxy command to connect to the server:
ssh:
proxy_command: aws ssm start-session --target %h --document-name AWS-StartSSHSession --parameters 'portNumber=%p' --region=us-east-1 ## ssh via aws ssm
Configuring the SSH log level
ssh:
log_level: debug
Valid levels are debug
, info
, warn
, error
and fatal
(default).
Using env variables
You can inject env variables into the app containers using env
:
env:
DATABASE_URL: mysql2://db1/hey_production/
REDIS_URL: redis://redis1:6379/1
Using secret env variables
If you have env variables that are secret, you can divide the env
block into clear
and secret
:
env:
clear:
DATABASE_URL: mysql2://db1/hey_production/
REDIS_URL: redis://redis1:6379/1
secret:
- DATABASE_PASSWORD
- REDIS_PASSWORD
The list of secret env variables will be expanded at run time from your local machine. So a reference to a secret DATABASE_PASSWORD
will look for ENV["DATABASE_PASSWORD"]
on the machine running MRSK. Just like with build secrets.
If the referenced secret ENVs are missing, the configuration will be halted with a KeyError
exception.
Note: Marking an ENV as secret currently only redacts its value in the output for MRSK. The ENV is still injected in the clear into the container at runtime.
Using volumes
You can add custom volumes into the app containers using volumes
:
volumes:
- "/local/path:/container/path"
MRSK env variables
The following env variables are set when your container runs:
MRSK_CONTAINER_NAME
: this contains the current container name and version
Using different roles for servers
If your application uses separate hosts for running jobs or other roles beyond the default web running, you can specify these hosts in a dedicated role with a new entrypoint command like so:
servers:
web:
- 192.168.0.1
- 192.168.0.2
job:
hosts:
- 192.168.0.3
- 192.168.0.4
cmd: bin/jobs
Note: Traefik will only by default be installed and run on the servers in the web
role (and on all servers if no roles are defined). If you need Traefik on hosts in other roles than web
, add traefik: true
:
servers:
web:
- 192.168.0.1
- 192.168.0.2
web2:
traefik: true
hosts:
- 192.168.0.3
- 192.168.0.4
Using container labels
You can specialize the default Traefik rules by setting labels on the containers that are being started:
labels:
traefik.http.routers.hey-web.rule: Host(`app.hey.com`)
Traefik rules are in the "service-role-destination" format. The default role will be web
if no rule is specified. If the destination is not specified, it is not included. To give an example, the above rule would become "traefik.http.routers.hey-web-staging.rule" if it was for the "staging" destination.
Note: The backticks are needed to ensure the rule is passed in correctly and not treated as command substitution by Bash!
This allows you to run multiple applications on the same server sharing the same Traefik instance and port. See https://doc.traefik.io/traefik/routing/routers/#rule for a full list of available routing rules.
The labels can also be applied on a per-role basis:
servers:
web:
- 192.168.0.1
- 192.168.0.2
job:
hosts:
- 192.168.0.3
- 192.168.0.4
cmd: bin/jobs
labels:
my-label: "50"
Using shell expansion
You can use shell expansion to interpolate values from the host machine into labels and env variables with the ${}
syntax.
Anything within the curly braces will be executed on the host machine and the result will be interpolated into the label or env variable.
labels:
host-machine: "${cat /etc/hostname}"
env:
HOST_DEPLOYMENT_DIR: "${PWD}"
Note: Any other occurrence of $
will be escaped to prevent unwanted shell expansion!
Using container options
You can specialize the options used to start containers using the options
definitions:
servers:
web:
- 192.168.0.1
- 192.168.0.2
job:
hosts:
- 192.168.0.3
- 192.168.0.4
cmd: bin/jobs
options:
cap-add: true
cpu-count: 4
That'll start the job containers with docker run ... --cap-add --cpu-count 4 ...
.
Setting a minimum version
You can set the minimum MRSK version with:
minimum_version: 0.13.3
Note: versions <= 0.13.2 will ignore this setting.
Configuring logging
You can configure the logging driver and options passed to Docker using logging
:
logging:
driver: awslogs
options:
awslogs-region: "eu-central-2"
awslogs-group: "my-app"
If nothing is configured, the default option max-size=10m
is used for all containers. The default logging driver of Docker is json-file
.
Using a different stop wait time
On a new deploy, each old running container is gracefully shut down with a SIGTERM
, and after a grace period of 10
seconds a SIGKILL
is sent.
You can configure this value via the stop_wait_time
option:
stop_wait_time: 30
Using remote builder for native multi-arch
If you're developing on ARM64 (like Apple Silicon), but you want to deploy on AMD64 (x86 64-bit), you can use multi-architecture images. By default, MRSK will setup a local buildx configuration that does this through QEMU emulation. But this can be quite slow, especially on the first build.
If you want to speed up this process by using a remote AMD64 host to natively build the AMD64 part of the image, while natively building the ARM64 part locally, you can do so using builder options:
builder:
local:
arch: arm64
host: unix:///Users/<%= `whoami`.strip %>/.docker/run/docker.sock
remote:
arch: amd64
host: ssh://root@192.168.0.1
Note: You must have Docker running on the remote host being used as a builder. This instance should only be shared for builds using the same registry and credentials.
Using remote builder for single-arch
If you're developing on ARM64 (like Apple Silicon), want to deploy on AMD64 (x86 64-bit), but don't need to run the image locally (or on other ARM64 hosts), you can configure a remote builder that just targets AMD64. This is a bit faster than building with multi-arch, as there's nothing to build locally.
builder:
remote:
arch: amd64
host: ssh://root@192.168.0.1
Using native builder when multi-arch isn't needed
If you're developing on the same architecture as the one you're deploying on, you can speed up the build by forgoing both multi-arch and remote building:
builder:
multiarch: false
This is also a good option if you're running MRSK from a CI server that shares architecture with the deployment servers.
Using a different Dockerfile or context when building
If you need to pass a different Dockerfile or context to the build command (e.g. if you're using a monorepo or you have different Dockerfiles), you can do so in the builder options:
# Use a different Dockerfile
builder:
dockerfile: Dockerfile.xyz
# Set context
builder:
context: ".."
# Set Dockerfile and context
builder:
dockerfile: "../Dockerfile.xyz"
context: ".."
Using multistage builder cache
Docker multistage build cache can singlehandedly speed up your builds by a lot. Currently MRSK only supports using the GHA cache or the Registry cache:
# Using GHA cache
builder:
cache:
type: gha
# Using Registry cache
builder:
cache:
type: registry
# Using Registry cache with different cache image
builder:
cache:
type: registry
# default image name is <image>-build-cache
image: application-cache-image
# Using Registry cache with additinonal cache-to options
builder:
cache:
type: registry
options: mode=max,image-manifest=true,oci-mediatypes=true
For further insights into build cache optimization, check out documentation on Docker's official website: https://docs.docker.com/build/cache/.
Using build secrets for new images
Some images need a secret passed in during build time, like a GITHUB_TOKEN, to give access to private gem repositories. This can be done by having the secret in ENV, then referencing it in the builder configuration:
builder:
secrets:
- GITHUB_TOKEN
This build secret can then be referenced in the Dockerfile:
# Copy Gemfiles
COPY Gemfile Gemfile.lock ./
# Install dependencies, including private repositories via access token (then remove bundle cache with exposed GITHUB_TOKEN)
RUN --mount=type=secret,id=GITHUB_TOKEN \
BUNDLE_GITHUB__COM=x-access-token:$(cat /run/secrets/GITHUB_TOKEN) \
bundle install && \
rm -rf /usr/local/bundle/cache
Traefik command arguments
Customize the Traefik command line using args
:
traefik:
args:
accesslog: true
accesslog.format: json
This starts the Traefik container with --accesslog=true --accesslog.format=json
arguments.
Traefik host port binding
Traefik binds to port 80 by default. Specify an alternative port using host_port
:
traefik:
host_port: 8080
Traefik version, upgrades, and custom images
MRSK runs the traefik:v2.9 image to track Traefik 2.9.x releases.
To pin Traefik to a specific version or an image published to your registry,
specify image
:
traefik:
image: traefik:v2.10.0-rc1
This is useful for downgrading Traefik if there's an unexpected breaking change in a minor version release, upgrading Traefik to test forthcoming releases, or running your own Traefik-derived image.
MRSK has not been tested for compatibility with Traefik 3 betas. Please do!
Traefik container configuration
Pass additional Docker configuration for the Traefik container using options
:
traefik:
options:
publish:
- 8080:8080
volume:
- /tmp/example.json:/tmp/example.json
memory: 512m
This starts the Traefik container with --volume /tmp/example.json:/tmp/example.json --publish 8080:8080 --memory 512m
arguments to docker run
.
Traefik container labels
Add labels to Traefik Docker container.
traefik:
labels:
traefik.enable: true
traefik.http.routers.dashboard.rule: Host(`traefik.example.com`) && (PathPrefix(`/api`) || PathPrefix(`/dashboard`))
traefik.http.routers.dashboard.service: api@internal
traefik.http.routers.dashboard.middlewares: auth
traefik.http.middlewares.auth.basicauth.users: test:$2y$05$H2o72tMaO.TwY1wNQUV1K.fhjRgLHRDWohFvUZOJHBEtUXNKrqUKi # test:password
This labels Traefik container with --label traefik.http.routers.dashboard.middlewares=\"auth\"
and so on.
Traefik alternate entrypoints
You can configure multiple entrypoints for Traefik like so:
service: myservice
labels:
traefik.tcp.routers.other.rule: 'HostSNI(`*`)'
traefik.tcp.routers.other.entrypoints: otherentrypoint
traefik.tcp.services.other.loadbalancer.server.port: 9000
traefik.http.routers.myservice.entrypoints: web
traefik.http.services.myservice.loadbalancer.server.port: 8080
traefik:
options:
publish:
- 9000:9000
args:
entrypoints.web.address: ':80'
entrypoints.otherentrypoint.address: ':9000'
Rebooting Traefik
If you make changes to Traefik args or labels, you'll need to reboot with:
mrsk traefik reboot
In production, reboot the Traefik containers one by one with a slower but safer approach, using a rolling reboot:
mrsk traefik reboot --rolling
Configuring build args for new images
Build arguments that aren't secret can also be configured:
builder:
args:
RUBY_VERSION: 3.2.0
This build argument can then be used in the Dockerfile:
ARG RUBY_VERSION
FROM ruby:$RUBY_VERSION-slim as base
Using accessories for database, cache, search services
You can manage your accessory services via MRSK as well. Accessories are long-lived services that your app depends on. They are not updated when you deploy.
accessories:
mysql:
image: mysql:5.7
host: 1.1.1.3
port: 3306
env:
clear:
MYSQL_ROOT_HOST: '%'
secret:
- MYSQL_ROOT_PASSWORD
volumes:
- /var/lib/mysql:/var/lib/mysql
options:
cpus: 4
memory: "2GB"
redis:
image: redis:latest
roles:
- web
port: "36379:6379"
volumes:
- /var/lib/redis:/data
internal-example:
image: registry.digitalocean.com/user/otherservice:latest
host: 1.1.1.5
port: 44444
The hosts that the accessories will run on can be specified by hosts or roles:
# Single host
mysql:
host: 1.1.1.1
# Multiple hosts
redis:
hosts:
- 1.1.1.1
- 1.1.1.2
# By role
monitoring:
roles:
- web
- jobs
Now run mrsk accessory start mysql
to start the MySQL server on 1.1.1.3. See mrsk accessory
for all the commands possible.
Accessory images must be public or tagged in your private registry.
Using Cron
You can use a specific container to run your Cron jobs:
servers:
cron:
hosts:
- 192.168.0.1
cmd:
bash -c "cat config/crontab | crontab - && cron -f"
This assumes the Cron settings are stored in config/crontab
.
Healthcheck
MRSK uses Docker healthchecks to check the health of your application during deployment. Traefik uses this same healthcheck status to determine when a container is ready to receive traffic.
The healthcheck defaults to testing the HTTP response to the path /up
on port 3000, up to 7 times. You can tailor this behaviour with the healthcheck
setting:
healthcheck:
path: /healthz
port: 4000
max_attempts: 7
interval: 20s
This will ensure your application is configured with a traefik label for the healthcheck against /healthz
and that the pre-deploy healthcheck that MRSK performs is done against the same path on port 4000.
You can also specify a custom healthcheck command, which is useful for non-HTTP services:
healthcheck:
cmd: /bin/check_health
The top-level healthcheck configuration applies to all services that use Traefik, by default. You can also specialize the configuration at the role level:
servers:
job:
hosts: ...
cmd: bin/jobs
healthcheck:
cmd: bin/check
The healthcheck allows for an optional max_attempts
setting, which will attempt the healthcheck up to the specified number of times before failing the deploy. This is useful for applications that take a while to start up. The default is 7.
Note: The HTTP health checks assume that the curl
command is available inside the container. If that's not the case, use the healthcheck's cmd
option to specify an alternative check that the container supports.
Commands
Running commands on servers
You can execute one-off commands on the servers:
# Runs command on all servers
mrsk app exec 'ruby -v'
App Host: 192.168.0.1
ruby 3.1.3p185 (2022-11-24 revision 1a6b16756e) [x86_64-linux]
App Host: 192.168.0.2
ruby 3.1.3p185 (2022-11-24 revision 1a6b16756e) [x86_64-linux]
# Runs command on primary server
mrsk app exec --primary 'cat .ruby-version'
App Host: 192.168.0.1
3.1.3
# Runs Rails command on all servers
mrsk app exec 'bin/rails about'
App Host: 192.168.0.1
About your application's environment
Rails version 7.1.0.alpha
Ruby version ruby 3.1.3p185 (2022-11-24 revision 1a6b16756e) [x86_64-linux]
RubyGems version 3.3.26
Rack version 2.2.5
Middleware ActionDispatch::HostAuthorization, Rack::Sendfile, ActionDispatch::Static, ActionDispatch::Executor, Rack::Runtime, Rack::MethodOverride, ActionDispatch::RequestId, ActionDispatch::RemoteIp, Rails::Rack::Logger, ActionDispatch::ShowExceptions, ActionDispatch::DebugExceptions, ActionDispatch::Callbacks, ActionDispatch::Cookies, ActionDispatch::Session::CookieStore, ActionDispatch::Flash, ActionDispatch::ContentSecurityPolicy::Middleware, ActionDispatch::PermissionsPolicy::Middleware, Rack::Head, Rack::ConditionalGet, Rack::ETag, Rack::TempfileReaper
Application root /rails
Environment production
Database adapter sqlite3
Database schema version 20221231233303
App Host: 192.168.0.2
About your application's environment
Rails version 7.1.0.alpha
Ruby version ruby 3.1.3p185 (2022-11-24 revision 1a6b16756e) [x86_64-linux]
RubyGems version 3.3.26
Rack version 2.2.5
Middleware ActionDispatch::HostAuthorization, Rack::Sendfile, ActionDispatch::Static, ActionDispatch::Executor, Rack::Runtime, Rack::MethodOverride, ActionDispatch::RequestId, ActionDispatch::RemoteIp, Rails::Rack::Logger, ActionDispatch::ShowExceptions, ActionDispatch::DebugExceptions, ActionDispatch::Callbacks, ActionDispatch::Cookies, ActionDispatch::Session::CookieStore, ActionDispatch::Flash, ActionDispatch::ContentSecurityPolicy::Middleware, ActionDispatch::PermissionsPolicy::Middleware, Rack::Head, Rack::ConditionalGet, Rack::ETag, Rack::TempfileReaper
Application root /rails
Environment production
Database adapter sqlite3
Database schema version 20221231233303
# Run Rails runner on primary server
mrsk app exec -p 'bin/rails runner "puts Rails.application.config.time_zone"'
UTC
Running interactive commands over SSH
You can run interactive commands, like a Rails console or a bash session, on a server (default is primary, use --hosts
to connect to another):
# Starts a bash session in a new container made from the most recent app image
mrsk app exec -i bash
# Starts a bash session in the currently running container for the app
mrsk app exec -i --reuse bash
# Starts a Rails console in a new container made from the most recent app image
mrsk app exec -i 'bin/rails console'
Running details to show state of containers
You can see the state of your servers by running mrsk details
:
Traefik Host: 192.168.0.1
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
6195b2a28c81 traefik "/entrypoint.sh --pr…" 30 minutes ago Up 19 minutes 0.0.0.0:80->80/tcp, :::80->80/tcp traefik
Traefik Host: 192.168.0.2
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
de14a335d152 traefik "/entrypoint.sh --pr…" 30 minutes ago Up 19 minutes 0.0.0.0:80->80/tcp, :::80->80/tcp traefik
App Host: 192.168.0.1
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
badb1aa51db3 registry.digitalocean.com/user/app:6ef8a6a84c525b123c5245345a8483f86d05a123 "/rails/bin/docker-e…" 13 minutes ago Up 13 minutes 3000/tcp chat-6ef8a6a84c525b123c5245345a8483f86d05a123
App Host: 192.168.0.2
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
1d3c91ed1f55 registry.digitalocean.com/user/app:6ef8a6a84c525b123c5245345a8483f86d05a123 "/rails/bin/docker-e…" 13 minutes ago Up 13 minutes 3000/tcp chat-6ef8a6a84c525b123c5245345a8483f86d05a123
You can also see just info for app containers with mrsk app details
or just for Traefik with mrsk traefik details
.
Running rollback to fix a bad deploy
If you've discovered a bad deploy, you can quickly rollback by reactivating the old, paused container image. You can see what old containers are available for rollback by running mrsk app containers
. It'll give you a presentation similar to mrsk app details
, but include all the old containers as well. Showing something like this:
App Host: 192.168.0.1
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
1d3c91ed1f51 registry.digitalocean.com/user/app:6ef8a6a84c525b123c5245345a8483f86d05a123 "/rails/bin/docker-e…" 19 minutes ago Up 19 minutes 3000/tcp chat-6ef8a6a84c525b123c5245345a8483f86d05a123
539f26b28369 registry.digitalocean.com/user/app:e5d9d7c2b898289dfbc5f7f1334140d984eedae4 "/rails/bin/docker-e…" 31 minutes ago Exited (1) 27 minutes ago chat-e5d9d7c2b898289dfbc5f7f1334140d984eedae4
App Host: 192.168.0.2
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
badb1aa51db4 registry.digitalocean.com/user/app:6ef8a6a84c525b123c5245345a8483f86d05a123 "/rails/bin/docker-e…" 19 minutes ago Up 19 minutes 3000/tcp chat-6ef8a6a84c525b123c5245345a8483f86d05a123
6f170d1172ae registry.digitalocean.com/user/app:e5d9d7c2b898289dfbc5f7f1334140d984eedae4 "/rails/bin/docker-e…" 31 minutes ago Exited (1) 27 minutes ago chat-e5d9d7c2b898289dfbc5f7f1334140d984eedae4
From the example above, we can see that e5d9d7c2b898289dfbc5f7f1334140d984eedae4
was the last version, so it's available as a rollback target. We can perform this rollback by running mrsk rollback e5d9d7c2b898289dfbc5f7f1334140d984eedae4
. That'll stop 6ef8a6a84c525b123c5245345a8483f86d05a123
and then start e5d9d7c2b898289dfbc5f7f1334140d984eedae4
. Because the old container is still available, this is very quick. Nothing to download from the registry.
Note that by default old containers are pruned after 3 days when you run mrsk deploy
.
Running removal to clean up servers
If you wish to remove the entire application, including Traefik, containers, images, and registry session, you can run mrsk remove
. This will leave the servers clean.
Locking
Commands that are unsafe to run concurrently will take a deploy lock while they run. The lock is the mrsk_lock-<service>
directory on the primary server.
You can check the lock status with:
mrsk lock status
Locked by: AN Other at 2023-03-24 09:49:03 UTC
Version: 77f45c0686811c68989d6576748475a60bf53fc2
Message: Automatic deploy lock
You can also manually acquire and release the lock
mrsk lock acquire -m "Doing maintenance"
mrsk lock release
Rolling deployments
When deploying to large numbers of hosts, you might prefer not to restart your services on every host at the same time.
MRSK's default is to boot new containers on all hosts in parallel. But you can control this by configuring boot/limit
and boot/wait
as options:
service: myservice
boot:
limit: 10 # Can also specify as a percentage of total hosts, such as "25%"
wait: 2
When limit
is specified, containers will be booted on, at most, limit
hosts at once. MRSK will pause for wait
seconds between batches.
These settings only apply when booting containers (using mrsk deploy
, or mrsk app boot
). For other commands, MRSK continues to run commands in parallel across all hosts.
Hooks
You can run custom scripts at specific points with hooks.
Hooks should be stored in the .mrsk/hooks folder. Running mrsk init will build that folder and add some sample scripts.
You can change their location by setting hooks_path
in the configuration file.
If the script returns a non-zero exit code the command will be aborted.
MRSK_*
environment variables are available to the hooks command for
fine-grained audit reporting, e.g. for triggering deployment reports or
firing a JSON webhook. These variables include:
MRSK_RECORDED_AT
- UTC timestamp in ISO 8601 format, e.g.2023-04-14T17:07:31Z
MRSK_PERFORMER
- the local user performing the command (fromwhoami
)MRSK_SERVICE_VERSION
- an abbreviated service and version for use in messages, e.g. app@150b24fMRSK_VERSION
- the full version being deployedMRSK_HOSTS
- a comma-separated list of the hosts targeted by the commandMRSK_COMMAND
- The command we are runningMRSK_SUBCOMMAND
- optional: The subcommand we are runningMRSK_DESTINATION
- optional: destination, e.g. "staging"MRSK_ROLE
- optional: role targeted, e.g. "web"
There are four hooks:
-
pre-connect Called before taking the deploy lock. For checks that need to run before connecting to remote hosts - e.g. DNS warming.
-
pre-build Used for pre-build checks - e.g. there are no uncommitted changes or that CI has passed.
-
pre-deploy For final checks before deploying, e.g. checking CI completed
-
post-deploy - run after a deploy, redeploy or rollback. This hook is also passed a
MRSK_RUNTIME
env variable set to the total seconds the deploy took.
This could be used to broadcast a deployment message, or register the new version with an APM.
The command could look something like:
#!/usr/bin/env bash
curl -q -d content="[My App] ${MRSK_PERFORMER} Rolled back to version ${MRSK_VERSION}" https://3.basecamp.com/XXXXX/integrations/XXXXX/buckets/XXXXX/chats/XXXXX/lines
That'll post a line like the following to a preconfigured chatbot in Basecamp:
[My App] [dhh] Rolled back to version d264c4e92470ad1bd18590f04466787262f605de
Set --skip_hooks
to avoid running the hooks.
SSH connection management
Creating SSH connections concurrently can be an issue when deploying to many servers. By default MRSK will limit concurrent connection starts to 30 at a time.
It also sets a long idle timeout of 900 seconds on connections to prevent re-connection storms after a long idle period, like building an image or waiting for CI.
You can configure both of these settings:
sshkit:
max_concurrent_starts: 10
pool_idle_timeout: 300
Stage of development
This is beta software. Commands may still move around. But we're live in production at 37signals.
License
MRSK is released under the MIT License.