Home automation endpoints

This is a collection of endpoints that will be useful if you own the following products:

A Sonos speaker
Philips Hue lightbulbs
A bttn (optional, but so much more awesome with one; see the bttn section below)
An Android phone with tasker (optional; only required for the "arriving home" endpoint)

Instructions

You need to have a home server that can serve these endpoints. I use nginx and have included server_uwsgi.ini to help with this if you wish to go down this route.

This project uses Flask, amongst other libraries. You can find all requirements in requirements.txt which you can install using pip.

There are plenty of good tutorials online about the above so I will skip straight to how to set up this project once you have it being served by a webserver.

bttn

The bttn is a wifi-connected button. You can make it send a GET request when you press it. This is why having these endpoints is so awesome; you can set up a bookmark widget on your phone, or you can have a big red button attached to your wall that does the same thing. When coupled with a "DO NOT PRESS" plaque (£2.99 on eBay) underneath the bttn you can see why it is the better option (especially for the "Sexy Time" endpoint).

You can find more details here: https://bt.tn/

Filling in the details

I am going to assume that you have a Sonos speaker and a Philips Hue lightbulb system (Lux or not, I don't think it makes a difference).

Copy vars.example.py to vars.py (which is in gitignore, so you can can edit vars.py and git pull without any conflicts). It comes pre-filled with sensible default values.

We are using basic HTTP authentication for the endpoints so that people can't just randomly fuck with your lights and music. It's obviously not perfect but does a good-enough job for this purpose (IMO).

Open up your newly-copied vars.py and fill in a username and password in the users dict.

Now fill in YOUR_NAME with your actual name (optional). If specified then the server homepage will display (e.g.) "This is Brad's home server. Welcome!" If left as an empty string then it will just say "This is a home server. Welcome!"

SONOS_IP is the IP address of your Sonos speaker
HUE_IP is the IP address of your Hue bridge.
HUE_USERNAME is your Hue username. This URL explains how to generate one: http://www.developers.meethue.com/documentation/getting-started

Okay, now onto the endpoints.

Sexy Time

When activated the Sexy Time endpoint plays a playlist on your Sonos system (the name is defined in SEXY_TIME_PLAYLIST_NAME, default: Sexy Time). It works best with the bttn because it's just cooler. When activated it plays the playlist on your Sonos system and dims the lights to SEXY_TIME_DIMMER_BRIGHTNESS (default: 125, about 20%) over SEXY_TIME_DIMMER_SECONDS (default: 10 seonds). The lights affected are SEXY_TIME_LIGHTS (default: 1, i.e. the first light; it can also be an array, e.g. [1, 2]). See "Notes" section for more information.

It also skips tracks when activated again. However we need to know the name of the first track in the playlist in order to do this as we just add the playlist to the queue and I don't think that you can get the playlist name from this. This is SEXY_TIME_FIRST_TRACK (default: 01 - Lets Get It On.mp3, obviously).

Party Time

This just affects your Sonos, not your lights. It plays PARTY_TIME_PLAYLIST_NAME (default: Party Time, in shuffle mode, and skips the first track otherwise we always end up with the same first track). When the endpoint is activated again it skips to the next track.

As you can imagine, a big red party button on your wall is better than visiting a URL.

Arriving Home

This requires Tasker on Android. You need to set it up so that:

When you connect to your WiFi network
Between the hours of 16:00 and 22:00 (suggested)
On a weekday (again, just a suggestion; whatever works for you)

It sends a GET request to to this endpoint (with HTTP auth; I find it easier to include in the URL, like http://username:password@server/automation/arriving-home/).

It sets the lights (ARRIVING_TIME_LIGHTS, see "Notes" section for more information) to ARRIVING_HOME_DIMMER_BRIGHTNESS over ARRIVING_HOME_DIMMER_SECONDS and plays ARRIVING_HOME_PLAYLIST_NAME (default: Arriving Home) at ARRIVING_HOME_VOLUME volume to provide a nice "arriving home" experience. I suggest filling the contents of ARRIVING_HOME_PLAYLIST_NAME with chilled music. Again, it plays in shuffle mode and skips the first track; it's nice to have a different track every day when you arrive home. Then it just keeps playing until you turn it off.

Imagine... when you arrive home the lights are on at a nice level and soft music is playing. I have this set up already and can confirm that it is almost magical :)

Stop

I've also created a "stop" endpoint that brings everything to an end. It does the following:

Clears the Sonos queue
Sets the volume to a sensible level, STOP_VOLUME
Sets the play mode to 'normal' (no shuffle or repeat)
Stops all playback
Sets the lights (STOP_LIGHTS, see "Notes" section for more information) to STOP_DIMMER_BRIGHTNESS over STOP_DIMMER_SECONDS seconds (nobody likes a jarring transition)

I've set this up as an icon (Chrome bookmark widget) on my phone.

Notes

The endpoints all return JSON, {'status': 'success'}.
A note on lights: you can provide a light number 1, an array [1, 2], a name 'Living Room', an array of names ['Living Room', 'Bedroom']... the phue documentation provides more comprehensive examples.
In order to make this work you need to initiate a venv (Google it).
When in your activated venv you need to run pip install -r requirements.txt in order to install all of the libraries that this project uses.
If you want to test this out without setting up a proper web server you can just run python server.py. It runs on port 9000 by default.
If you have any questions then feel free to ask.

mrkipling / auto-awesome