moonglow / pcan_pro_x

:alien: XCAN PRO/PRO FD/FD USB2CAN firmware implementation for cheap STM32F4 hardware

moonglow/pcan_pro_x Issues

why i cannot setup usbdriver in window10?
Closed 4 years ago9
Not an issue
Updated 3 months ago7
support canfd
Closed 5 months ago
Reference hardware
Updated 8 months ago39
lack of CODESYS Support
Updated 8 months ago
Why not use the STM32G431 for the CAN FD firmware?
Closed 4 years ago2
Is it working good with TJA1042
Updated a year ago
Daulboot possible?
Updated 2 years ago
Passthru support
Updated 2 years ago4
stm32f407ve report assert on protocol.c
Closed 2 years ago2
!ACHTUNG! PEAK company copyrighted data
Updated 3 years ago
Sending data lost with huge data stream
Closed 3 years ago1
HSE frequency auto-detect?
Closed 3 years ago1
bus load monitoring
Closed 3 years ago1
STM32f407 Standard
Closed 3 years ago2
Difference with pcan_cantact
Closed 3 years ago2
can't open device
Closed 3 years ago7
USB pins
Closed 3 years ago2
LIN protocol implemetation
Updated 4 years ago10
LIN implementation, lack of USB endpoints
Updated 4 years ago