moobyes / inspect

Source Code that Powers the CSFloat Inspect Link API

CSGOFloat is a free and open source API service that allows you to obtain the float and paint seed of any CSGO item using its inspect link.

Repo Links

CSGOFloat-Extension

CSGOFloat-Website

Table of Contents

• API
  • GET /
    • Examples
  • GET / (Using an Inspect URL)
    • Examples
  • Reply
  • Errors
• How to Install
  • Docker
  • Manual
  • Steps
  • How to First Login a Bot
  • Breaking Changes
  • Args

API

GET /

Parameters s, a, d, m can be found in the inspect link of a csgo item.

Parameter	Description
s	Optional: If an inventory item, fill out this parameter from the inspect URL
a	Required: Inspect URL "a" param
d	Required: Inspect URL "d" param
m	Optional: If a market item, fill out this parameter from the inspect URL

Examples

http://<ip>:<port>/?m=563330426657599553&a=6710760926&d=9406593057029549017

http://<ip>:<port>/?s=76561198084749846&a=6777992090&d=3378412659870065794

GET / (Using an Inspect URL)

Parameter	Description
url	Required: Inspect URL of the CSGO item

Examples

http://<ip>:<port>/?url=steam://rungame/730/76561202255233023/+csgo_econ_action_preview%20S76561198084749846A698323590D7935523998312483177

http://<ip>:<port>/?url=steam://rungame/730/76561202255233023/+csgo_econ_action_preview%20M625254122282020305A6760346663D30614827701953021

Reply

The reply of this API is based upon this CSGO protobuf.

Attribute	Data Type	Description
itemid	uint32	Item ID
defindex	uint32	Weapon ID
paintindex	uint32	Paint ID of the weapon (skin)
rarity	uint32	Rarity value of the weapon
quality	uint32	Quality of the weapon
paintwear	uint32	Wear of the exterior of the skin
paintseed	uint32	Seed for the RNG that defines how to place the skin texture
killeatervalue	uint32	If the item is StatTrak, this is the amount of kills
customname	string	If the item has a nametag, this is the custom name
stickers	array	Contains data on the placement of stickers
origin	uint32	Origin ID of the weapon
floatvalue	float	Exterior wear of the skin in its float representation
imageurl	string	Optional: Image of the item
min	float	Minimum wear of the skin
max	float	Maximum wear of the skin
item_name	uint32	Optional: Name of the skin
weapon_type	string	Weapon type name
origin_name	string	Origin name (Trade-Up, Dropped, etc...)
quality_name	string	Quality name (Souvenir, Stattrak, etc...)
rarity_name	string	Rarity name (Covert, Mil-Spec, etc...)
wear_name	string	Wear name (Factory New, Minimal Wear, etc...)
full_item_name	string	Full Item Name (ex. SSG 08 Blue Spruce (Minimal Wear))

{
	"iteminfo": {
		"accountid": null,
		"itemid": "13874827217",
		"defindex": 7,
		"paintindex": 282,
		"rarity": 5,
		"quality": 4,
		"paintseed": 361,
		"killeaterscoretype": null,
		"killeatervalue": null,
		"customname": null,
		"stickers": [],
		"inventory": 11,
		"origin": 8,
		"questid": null,
		"dropreason": null,
		"musicindex": null,
		"s": "0",
		"a": "13874827217",
		"d": "4649025583329100061",
		"m": "2608048286785948758",
		"floatvalue": 0.22740158438682556,
		"imageurl": "http://media.steampowered.com/apps/730/icons/econ/default_generated/weapon_ak47_cu_ak47_cobra_light_large.7494bfdf4855fd4e6a2dbd983ed0a243c80ef830.png",
		"min": 0.1,
		"max": 0.7,
		"weapon_type": "AK-47",
		"item_name": "Redline",
		"rarity_name": "Classified",
		"quality_name": "Unique",
		"origin_name": "Found in Crate",
		"wear_name": "Field-Tested",
		"full_item_name": "AK-47 | Redline (Field-Tested)"
	}
}

POST /bulk

Allows you to request the inspect link data for multiple items at once.

NOTE: Ensure that you send proper Content-Type: application/json headers

Request Body:

{
	"links": [
		{"link": "steam://rungame/730/76561202255233023/+csgo_econ_action_preview%20M2906459769049600931A18971892678D9403672490970763167"},
		{"link": "steam://rungame/730/76561202255233023/+csgo_econ_action_preview%20M2907585668964658722A17231546984D5353704955732169451"}
	]
}

Example Response:

{
    "18971892678": {
        "origin": 8,
        "quality": 4,
        "rarity": 5,
        "a": "18971892678",
        "d": "9403672490970763167",
        "paintseed": 49,
        "defindex": 7,
        "paintindex": 282,
        // STUB...
    },
    "17231546984": {
        "origin": 4,
        "quality": 4,
        "rarity": 4,
        "a": "17231546984",
        "d": "5353704955732169451",
        "paintseed": 597,
        "defindex": 9,
        "paintindex": 838,
        // STUB...
    },
    ...
}

GET /stats

Gives some data on the current status of your bots and queue.

Example:

{"bots_online":100,"bots_total":100,"queue_size":20,"queue_concurrency":100}

Errors

Error Codes

Code	Description
1	Improper Parameter Structure
2	Invalid Inspect Link Structure
3	You may only have X pending request(s) at a time
4	Valve's servers didn't reply in time
5	Valve's servers appear to be offline, please try again later!
6	Something went wrong on our end, please try again
7	Improper body format
8	Bad Secret

Example Error

{
	"error": "Valve's servers didn't reply in time",
	"code": 4
}

If using a /bulk request and the error only applies to a specific inspect link, the returned response for it will be replaced while other inspect links will be processed normally. If the error applies to the entire request (ie. bad post body), it will return a root-level error as shown above.

Example:

{
    "18971892678": {
        "origin": 8,
        "quality": 4,
        "rarity": 5,
        "a": "18971892678",
        "d": "9403672490970763167",
        "paintseed": 49,
        "defindex": 7,
        "paintindex": 282,
        // STUB...
    },
    "16231546984": {
        "error": "Valve's servers didn't reply in time",
        "code": 4,
        "status": 500
    }
}

How to Install

In order to retrieve float values for weapons in this way, you must have Steam account(s) with a copy of CS:GO. Each account can request 1 float per second. CSGOFloat allows you to have as many bots as you'd like by inputting the login info into config.js.

Each instance of CSGOFloat can operate around 300 accounts. It is recommended to either configure a Postgres server or setup another cache such as Varnish or Nginx in front of your server.

Docker

Pull the image from docker and mount the config directory

docker pull step7750/csgofloat:master
docker run -d --name csgofloat -v /host/config:/config -p 80:80 -p 443:443 step7750/csgofloat:master

The first time you start the docker container, it'll copy the config.js file to the config directory and stop. You'll need to edit this file and include your bots login information and then start the docker again. See the section How to First Login a Bot for further info.

Make sure you configure a Postgres server to use for caching!

Manual

Requires Node.js v8+!

Clone the repo (or npm install csgofloat) and install the Node.js dependencies using npm install or yarn install in the root directory.

Steps:

1. Copy config.example.js to config.js
2. Add your bot(s) login information to config.js
3. Edit config.js with your desired settings
4. Ensure Postgres is running if you've set it's database url
5. Run node index.js in the main directory
6. How to First Login a Bot
7. Navigate to the IP that the server is hosted on and query the API using the docs above!

How to First Login a Bot

Note: If the bot has never logged into the steam client before and doesn't have Mobile 2FA enabled (fresh account), you can just input the username and password and it should successfully log in without email 2FA

If your bot doesn't own CS:GO, CSGOFloat will automatically try to obtain a license for it during startup.

• Using Email 2FA
  • Only fill in the user and pass fields for the bot (make sure the auth field is empty or removed)
  • Start up CSGOFloat
  • It will tell you that an auth code was sent to your email
  • Input the code from your email into the auth field for the bot
  • Restart CSGOFloat
  • It should successfully login and create a sentry file in the current node-steam-user config directory
  • The auth field can now be optionally removed in your login file for further logins
• Using Mobile 2FA
  • Fill in the user and pass fields for the bot
  • Fill in the auth field with the shared_secret for the bot
  • Start up CSGOFloat
  • It should successfully login and create a sentry file in the current node-steam-user config directory
  • You'll need to keep the auth field filled in for future logins

Breaking Changes

v3.0 -> v4.0

• MongoDB is no longer supported, use Postgres instead
• Socket.io access is no longer supported
• Built-in HTTPS handling has been removed, reverse proxy to HTTP instead

v2.0 -> v3.0

• Since we now use node-steam-user instead of node-steam, the sentry folder location now depends on your system. If you'd like to migrate sentry files from v2.0 rather than having to reauthenticate email 2FA accounts, you'll need to copy your sentry files and rename them to match node-steam-user's format
• allow_simultaneous_requests has now been replaced by max_simultaneous_requests. You can set max_simultaneous_requests to -1 to allow an infinite amount of simultaneous requests by the same IP.

Args

-c/--config (default ./config.js)

CSGOFloat config file location

-s/--steam_data (default node-steam-user config directory)

node-steam-user config directory