Read all about FlexGet here.
If you do not have a configuration already, you can look around starting off with something like this config.yml:
web_server: yes
schedules:
- tasks: '*'
interval:
minutes: 1
tasks:
test task:
rss: http://myfavoritersssite.com/myfeed.rss
series:
- My Favorite Show
Put this file in your data/config folder as config.yml
.
For a much better FlexGet config.yml example take a look at the bottom of this page.
Recently the python version inside this image had to be upgraded from 2.x to 3.x, this might result in this error message:
INFO scheduler Starting scheduler
INFO apscheduler.scheduler Scheduler started
ERROR apscheduler.jobstores.default Unable to restore job "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" -- removing it
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/apscheduler/jobstores/sqlalchemy.py", line 141, in _get_jobs
jobs.append(self._reconstitute_job(row.job_state))
File "/usr/lib/python3.7/site-packages/apscheduler/jobstores/sqlalchemy.py", line 125, in _reconstitute_job
job_state = pickle.loads(job_state)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe3 in position 1: ordinal not in range(128)
This is supposedly safe to ignore and should only happens once. If not, let me know.
docker create \
--name=flexget \
-e PUID=<uid> \
-e PGID=<gid> \
-e WEB_PASSWD=yourhorriblesecret \
-e TORRENT_PLUGIN=transmission \
-e TZ=Europe/London \
-e FLEXGET_LOG_LEVEL=debug \
-p 5050:5050 \
-v <path to data>:/config \
-v <path to downloads>:/downloads \
cpoppema/docker-flexget
For shell access whilst the container is running do docker exec -it flexget /bin/bash
.
Parameters
-e PUID
for UserID - see below for explanation-e PGID
for GroupID - see below for explanation-e WEB_PASSWD
for the Web UI password - see below for explanation-e TORRENT_PLUGIN
for the torrent plugin you need, e.g. "transmission" or "deluge"-e TZ
for timezone information, e.g. "Europe/London"-e FLEXGET_LOG_LEVEL
for logging level - see below for explanation-e PIP_REQUIREMENTS_FILE
to either add neccessary packages for plugins or to pin e.g. FlexGet to a certain version until you have time to migrate your configuration because they might be incompatible.-p 5050
for Web UI port - see below for explanation-v /config
- Location of FlexGet config.yml (DB files will be created on startup and also live in this directory)-v /downloads
- location of downloads on disk
Torrent plugin: Transmission
FlexGet is able to connect with transmission using transmissionrpc
, which is installed as the default torrent plugin in this container. For more details, see http://flexget.com/wiki/Plugins/transmission.
Please note: This Docker image does NOT run Transmission. Consider running a Transmission Docker image alongside this one.
For transmission to work you can either omit the TORRENT_PLUGIN
environment variable or set it to "transmission".
Torrent plugin: Deluge
FlexGet is also able to connect with deluge using deluge-common
, which can be installed in this container, replacing the transmission plugin. For more details, see https://www.flexget.com/Plugins/deluge.
Please note: This Docker image does NOT run Deluge. Consider running a Deluge Docker image alongside this one.
For deluge to work you need to set TORRENT_PLUGIN
environment variable to "deluge".
Daemon mode
This container runs flexget in daemon mode. This means by default it will run your configured tasks every hour after you've started it for the first time. If you want to run your tasks on the hour or at a different time, look at the scheduler plugin for configuration options. Configuration is automatically reloaded every time just before starting the tasks as scheduled, to apply your changes immediately you will need to restart the container.
Web UI
FlexGet is able to host a Web UI if you have this enabled in your configuration file. See the wiki for all details. To get started, simply add:
web_server: yes
The Web UI is protected by a login, you need to either set the WEB_PASSWD
environment variable or setup a user after starting this docker:
Connect with the running docker:
docker exec -it flexget bash
If your configuration file is named "config.yml" you can setup a password like this:
flexget -c /config/config.yml web passwd <some_password>
Now you can open the Web UI at http://<ip-of-the-machine-running-docker>:5050
and login with this password, use flexget
as your username.
Note: if you ever change your password in a running container, don't worry. Recreating or restarting your container will not simply overwrite your new password. If you want to reset your password to the value in WEB_PASSWD
you can simply remove the .password-lock
file in your config folder.
Logging Level
Set the verbosity of the logger. Optional, defaults to debug if not set. Levels: critical, error, warning, info, verbose, debug, trace.
Installing additional packages
Using -e PIP_REQUIREMENTS_FILE
you can install extra plugin packages you need that are not (yet) baked into this image. If you want to this image to support your plugin out of the box, open an issue to request it or create pull request to add it! Until that's done, here's how you can add packages.
Specifying -e PIP_REQUIREMENTS_FILE
will install packages besides the provided requirements.txt.
To get started, create a file my-requirements.txt
inside your /config directory. Let's say you need sleekxmpp
for the xmpp notifier system and it is missing from this image. You tell the image where to find it like this:
docker create \
--name=flexget \
-e PIP_REQUIREMENTS_FILE=/config/my-requirements.txt \
-v <path to data>:/config \
-v <path to downloads>:/downloads \
cpoppema/docker-flexget
If you don't like adding files to your /config directory, you can put it anywhere with an extra -v flag:
docker create \
--name=flexget \
-e PIP_REQUIREMENTS_FILE=/my-requirements.txt \
-v <path to data>:/config \
-v <path to downloads>:/downloads \
-v <path to my-requirements.txt>:/my-requirements.txt \
cpoppema/docker-flexget
Pinning packages or FlexGet
To pin packages that are automatically installed you use -v to overwrite /requirements.txt
:
docker create \
--name=flexget \
-v <path to data>:/config \
-v <path to downloads>:/downloads \
-v <path to version pinned requirements.txt>:/requirements.txt \
cpoppema/docker-flexget
If you want to pin packages that are not automatically installed, you can follow the instructions above and put the versions you want in my-requirements.txt
.
TL;DR - The PGID
and PUID
values set the user / group you'd like your container to 'run as' to the host OS. This can be a user you've created or even root (not recommended).
Part of what makes this container work so well is by allowing you to specify your own PUID
and PGID
. This avoids nasty permissions errors with relation to data volumes (-v
flags). When an application is installed on the host OS it is normally added to the common group called users, Docker apps due to the nature of the technology can't be added to this group. So this feature was added to let you easily choose when running your containers.
- Upgrade to the latest version of FlexGet simply
docker restart flexget
. - Monitor the logs of the container in realtime
docker logs -f flexget
.
Credits
- linuxserver.io for providing awesome docker containers.