Maki Kato's repositories
cnc-standing-height-workbench
The CNC Maker Bench is a standing height workbench emblazoned with "Makey", MAKE's robot mascot. It is fully customizable through the use of AtFab parametric table app and a little CAD manipulation. Full tutorial available at:
coldfusion-57-challenges
from the book Exercises for Programmers -- done in coldfusion/lucee
glitchworks_monitor
Glitch Works Monitor targeted toward the 8080/8085/Z80 CPUs
gxemul
This is a playground for hacking on gxemul.
libserialport
experimenting with zig build - not needing visual studio or msbuild to build for windows
Makelangelo
Wall-hanging polargraph robot that draws murals
otrona_keyboard
using a pi pico to connect a usb keyboard to otrona
Pocket-FT8
A pocket sized FT8 Transceiver utilizing Teensy 3.6, Si4735 and Si5351 technology.
qmk_firmware
Open-source keyboard firmware for Atmel AVR and Arm USB families
ps2pico
USB keyboard to PS/2 / AT / XT / Otrona interface converter using a Raspberry Pi Pico
racktables
RackTables current development repository
RomWBW
System Software for Z80/Z180 Computers
STM32F769-FT8-Transceiver
A DSP SDR project using a STM32f769 Disco board to field a self contained FT8 Transceiver utilizing SoftRock, UHFSDR , HobbyPCB RS-HFIQ SDR Transceiver Board and other SDR boards.
TD4_SV
TD4 (4bit CPU) written by System Verilog
vfloppy
builds with zig on windows
zig
Exercism exercises in Zig.