README

Welcome to the rt-n56u project

This project aims to improve the rt-n56u and other supported devices on the software part, allowing power user to take full control over their hardware. This project was created in hope to be useful, but comes without warranty or support. Installing it will probably void your warranty. Contributors of this project are not responsible for what happens next.

How do I get set up?

Get the tools to build the system or Download pre-built system image
Feed the device with the system image file (Follow instructions of updating your current system)
Perform factory reset
Open web browser on http://my.router to configure the services

Contribution guidelines

To be completed

特别说明

汉化字典来自 https://github.com/gorden5566/padavan

固件特点

使用gorden5566的汉化字典
aria2可选使用较新版本的预编译程序 CONFIG_FIRMWARE_INCLUDE_ARIA2_NEW_PREBUILD_BIN
aria2前端更换为AriaNg
curl可选编译可执行程序CONFIG_FIRMWARE_INCLUDE_CURL
使用了PROMETHEUS提供的部分补丁，包括新版本的类库、软件包和WIFI驱动补丁CONFIG_APPLY_PROMETHEUS_WIFI_DRIVER_PATCH
使用了Linaro1985/padavan-ng的部分软件包
集成以下软件

scutclient CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT

gdut-drcom CONFIG_FIRMWARE_INCLUDE_GDUT_DRCOM

dogcom CONFIG_FIRMWARE_INCLUDE_DOGCOM

minieap CONFIG_FIRMWARE_INCLUDE_MINIEAP

njit-client CONFIG_FIRMWARE_INCLUDE_NJIT_CLIENT

napt66 CONFIG_FIRMWARE_INCLUDE_NAPT66

ssr/ss CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS

ss-server CONFIG_FIRMWARE_INCLUDE_SSSERVER

softether-vpnserver CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_SERVER

softether-vpnclient CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CLIENT

softether-vpncmd CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CMD

dns-forwarder CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER

vlmcsd CONFIG_FIRMWARE_INCLUDE_VLMCSD

ttyd CONFIG_FIRMWARE_INCLUDE_TTYD

lrzsz CONFIG_FIRMWARE_INCLUDE_LRZSZ

htop CONFIG_FIRMWARE_INCLUDE_HTOP

nano CONFIG_FIRMWARE_INCLUDE_NANO

iperf CONFIG_FIRMWARE_INCLUDE_IPERF

iperf3 CONFIG_FIRMWARE_INCLUDE_IPERF3

dump1090 CONFIG_FIRMWARE_INCLUDE_DUMP1090

rtl-sdr CONFIG_FIRMWARE_INCLUDE_RTL_SDR

samba3.6 CONFIG_FIRMWARE_INCLUDE_SMBD36

mtr CONFIG_FIRMWARE_INCLUDE_MTR

已适配除官方适配外的以下机型

WR1200JS (128M,USB)

NEWIFI3(D2) (512M,USB)

K2 / PSG1218 (64M)

K2P (128M,杂交固件)

K2P_DRV/K2P_nano (128M)

MZ-R13 (64M)

MZ-R13P (未测试,64M)

HC5661A (128M)

OYE-001 (128M,USB)

MI-MINI (未测试,128M,USB)

MI-3 (未测试,128M,USB)

5K-W20 (未测试,64M,USB)

编译说明

安装依赖包

sudo apt-get update
sudo apt-get install unzip libtool curl cmake gperf gawk flex bison nano \
git python-docutils gettext automake autopoint texinfo build-essential \
pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev

克隆源码

git clone --depth=1 https://gitee.com/hanwckf/rt-n56u.git /opt/rt-n56u
#git clone --depth=1 https://github.com/hanwckf/rt-n56u.git /opt/rt-n56u

编译工具链

cd /opt/rt-n56u/toolchain-mipsel
./clean_sources
./build_toolchain_3.4.x

(可选)修改机型配置文件

nano /opt/rt-n56u/trunk/configs/templates/PSG1218.config

清理代码树并开始编译

cd /opt/rt-n56u/trunk
sudo ./clear_tree
sudo ./build_firmware_modify PSG1218
#脚本第一个参数为路由型号，在trunk/configs/templates/中
#编译好的固件在trunk/images里

mk200 / rt-n56u