!!!FIRST STABLE RELEASE APRIL 2021!!!
Build a Raspberry-Pi/Node-Red Van Control System.
This system is based on Node-Red, so it can be used on different platforms. We're mainly talking about a Raspberry Pi setup here. Since we're using the wifi of the RPI, model 3B or newer is recommended. It has a modular flow system. Each flow provides seperate functions.
Already done and working:
- Nextion Display
- DS18b20
- Webasto W-Bus integration.
Quick Start - Installing it yourself
- Install NodeJS & Node-Red
- Import the main flow
- Setup your ports & your modules.
- Import the flows
- Toggle all flows you don´t use to inactive
- Install the following extra nodes:
- node-red-contrib-ads1x15
- node-red-contrib-binary
- node-red-contrib-ds18b20-sensor
- ncd-red-comm
Quick Start - Use our preconfigured image:
- Burn our image to your SD card - (we recommend Win32 Disk Imager to do so)
- Put the SD card in your raspberry and you are ready to go
- Connect to wifi pekawayDIYcontrol (provided by RPI, model 3B or newer needed) - pw: pekawayYES
- Open the dashboard: http://peka.way
- Node-red config board - http://192.168.4.1:1880
Image: https://pekaway.de/pekaway_control.zip
- version 0.0.2
coming up:
- china diesel heater protocol integration
- easy connect pcb, with waveshare 8 relais pcb
- raspberry pi hat pcb
- peacefair rs485 shunt
- daly/heyo BMS integration
All 3D-printed parts can be found here: https://github.com/pekaway/3d-parts