mitag / WEACT_H743

WEACT_H743

WEACT_H743 board definition for Micropython.

Build steps:

• Go to the ports/stm32 directory
• Run make BOARD=WEACT_H743
• Connect the board to the PC using ST-Link
• Flash the firmware.hex or firmware.bin from the subdir build-WEACT_H743 using a favorite flashig app (e.g. STM32CubeProgrammer)
• Disconnect the ST-Link device
• Connect the board to the PC using USB
• Reset the board

The configuration is far from complete, it serves as a reference for creating the WEACT_H750 board definition, so it is not optimal.