Mammotion - Home Assistant Integration

This integration allows you to control and monitor your Mammotion Luba, Luba 2 & Yuka robot mowers using Home Assistant.

⚠️ Please note: This integration is still a work in progress. You may encounter unfinished features or bugs. If you come across any issues, please open an issue on the GitHub repository. 🐛

Roadmap 🗺️

Features ✨

Start and stop the mower
Monitor the mower's status (e.g., mowing, charging, idle)
View the mower's battery level
More features being added all the time!

Prerequisites 📋

Home Assistant installed and running
Mower connected to your home network
Bluetooth proxy for Home Assistant

Installation 🛠️

This integration can be installed using HACS

Install the integration via HACS as mentioned above
Restart HA
Open the Home Assistant web interface.
Navigate to "Configuration" > "Integrations".
Click on the "+" button in the bottom right corner to add a new integration.
Search for "Mammotion" and select it from the list.
Select your robot mower by name when prompted.
Click on "Submit" to complete the integration setup.

Usage 🎮

Once the integration is set up, you can control and monitor your Mammotion mower using Home Assistant. 🎉

Troubleshooting 🔧

If you encounter any issues with the Mammotion integration, please check the Home Assistant logs for error messages. You can also try the following troubleshooting steps:

Verify that you have Bluetooth proxy setup with Home Assistant.
Ensure that your mower is connected to your home network and accessible from Home Assistant.
Restart Home Assistant and check if the issue persists.

If the problem continues, please file an issue on the GitHub repository for further assistance. 🙏

mikey0000 / HA-Luba