SV08 is a flying gantry Core-XY printer with a print area of 350x350x345mm, also a derivative work based on Voron V2.4. It aims to provide an alternative solution for 3D printing enthusiasts who are eager to use Voron V2.4 but are hindered by high costs and learning barriers. We comply with the open source regulations of Voron and Klipper, and make SV08 open source (including structure, hardware, and firmware) for users to DIY.
SV08 mostly featured with:
- Core-XY kinematic design
- 4 independent Z motors(flying gantry) for precise control
- Enhanced details with Klipper firmware
- Large printing volume of 350x350x345mm
- Smooth operation with all-axes linear rails
- Quick and hassle-free assembly in just 1 hour
- Fully open-source for customization and flexibility
on Sovol Official Website: https://www.sovol3d.com/products/sovol-sv08-3d-printer
This is the official source code for Sovol SV08. The damage caused by modifying firmware also using the third party firmware will lose the 1 year warranty. If you need support, it’s recommended to reflash the stock firmware before contacting sovol.
Sovol doesn’t provide tech help for help users to modify source code, but if you need us to add more functions, you are welcome to send us your suggestions via Facebook Messenger or email info@sovol3d.com
Notice: Use the KIAUH script to update klipper, the updated address is Sovol-klipper How to update klipper
- cd kiauh
- ./kiauh.sh
- input Perform action: 3 and Remove klipper
- back and install klipper
- Sovol Facebook page: https://www.facebook.com/sovol3d/
- Sovol Youtube Channel: https://www.youtube.com/c/Sovol/videos
- Sovol Offcial User Group: https://www.facebook.com/groups/sovol3d
- Sovol Forum website: https://forum.sovol3d.com/