- Download .bin Firmware File
- Power Up BABOI
- Connect Computer o Phone to BABOI Access Point
- Go to webapge 192.168.1.1 in browser
- Select "Update"
- Select firmware File
##Processing Sketch update Just copy the .app file in the relase folder to your computer
Left LED
Red,Green,Blue -> Boot Yellow -> Ready for Connection Green -> Connection initiated
Right LED
Off > Not Connected Red > Pause Green > Live Blue > Acc/Gyro Cal Cyan > Mag Cal Magenta > Button Cal White > Glove Tension Strip Cal
Left
CTRL-Button Short Press > Live/Pause Toggle Long Press > Gyro/Accelerometer Calibration Very Long Press > Mag Calibration
Front
A-Button
Right
B-Button
- Best Way to calibrate is from the webpage
- Buttons might not work correctly initially. Calibrate from Webpage...
- Gyro/Accelerometer Calibration can be triggered both by 3 sec button press or webpage.
- Button/Mag calibration can only be triggered from webpage.
- If in doubt reset settings from webpage... (That will force a button recalibration on next start...)
- Enable Network support in App
- Connect computer to "BABOI" access point
- Web Page is available at 192.168.1.1
- VPN/Firewall might enterfere. Traffic is on Port 2255. Connection is established via Broadcast, then communication switches to unicast.